TS20x, TS30x Temperature Sensor

“

Specifications:

• Temperature Sensor Models: TS20x, TS30x
• Optional Sensor and Sensor Accessories for TS30x:
  • PT100 Temperature Probe
  • Magnet Switch Sensor (With 3M Tapes and Mounting Screws)
  • Glass Bead Thermal Buffer Bottle Kit
• Features:
  • Mounting Holes
  • LCD Display
  • NFC Area
  • Type-C USB
  • Battery Compartment
  • Power Button
  • Reset Button
  • LED Indicator

Product Usage Instructions:

Power On/Off and Temperature Update:

Power On: Press and hold the power button for
more than 3 seconds. The device will turn on with all icons showing
for 3 seconds.

Power Off: Quick press the power button once.
The device will update the latest temperature of the current
channel or display another channel’s latest temperature.

NFC Configuration (Method 1):

1. Download Milesight ToolBox App on an NFC-supported smartphone
   (Android/iOS).
2. Attach the NFC area of the smartphone to the device. Click NFC
   Read to read the device and click Write to configure the device
   settings. Change the default password for security reasons (Default
   password: 123456).

USB Configuration (Method 2 – TS30x Only):

1. Download ToolBox software from Milesight official website.
2. Remove the USB waterproof plug from the bottom of the device
   and connect it to the computer via a Type-C USB cable.
3. Open ToolBox software, select type as General, select the
   serial port as USB port, login using the default password (123456),
   and configure the device. Change the default password for security
   reasons.

Device Installation:

TS20x:

• Wall Plugs and Screw Mounting
• Cable-tie Mounting

TS30x:

• Wall Plugs and Screw Mounting
• Cover Screw Caps

Magnet Switch Installation (TS30x Only):

• Fixed by Screws
• Fixed by 3M Tape

Thermal Buffer Bottle:

To use, unplug the stopper inside the bottle cap, insert the
temperature probe into the bottle. Place it in freezers or
refrigerators for accurate temperature measurement.

FAQ:

Where can I download software and files related to the
product?

All software & files can be downloaded from
Milesight Download Center.

What is the default password for configuration?

The default password for configuration is 123456. It is
recommended to change this password for security purposes.

“`

TEMPERATURE SENSOR TS20x & TS30x

TS20x

1 × TS20x Device

1 × ER14505 Li-SOCl2 Battery

1 × Temperature Probe

4 × Wall Screw Mount Kits

1 x Quick Start Guide TS30x

1 × Warranty Card

1 × Glass Bead Thermal Buffer Bottle Kit (Optional)

1 × TS30x Device

4 × Wall Screw Mount Kits

2 × Screw Caps

1 x Quick Start Guide

1 × Warranty Card

1 × Type-C Cable & Power Adapter (Optional)

Optional Sensor and Sensor Accessories for TS30x

PT100 Temperature Probe

Magnet Switch Sensor (With 3M Tapes and Mounting Screws)

Glass Bead Thermal Buffer Bottle Kit

TS20x TS30x

Mounting Holes LED Indicator
NFC Area Sensor Channel

Battery Compartment Mounting Holes

LCD Display NFC Area
Type-C USB

Mounting Holes Power Button

Batteries Reset Button

Sensor Channel

LED Indicator

Power Button

Function Power On/Off Update Temperature

Action
Press and hold the power button for more than 3 seconds
Quick press the power button once

Switch Temperature Display (TS302 with both temperature
sensors only)

Quick press the power button twice

Reset Button Function
Reset to Factory Default

Action
Press and hold the reset button for more than 10 seconds

LCD Display Power On: All icons show 3s
Power OffOff Update the latest temperature
of the current channel
Display another channel’s latest temperature
LED Indicator Blinks quickly

Insert the battery and tighten the battery compartment cover. The device will turn on automatically and the LED indicator will be static on for 3s.

Method 1: Configured by NFC 1. Download “Milesight ToolBox” App on an NFC-supported smartphone.

Andriod

iOS

2. Open “Milesight ToolBox” App and attach the NFC area of the smartphone to the device. Click “NFC Read” to read the device and click “Write” to configure the device settings. It’s suggested to change the default password for security reasons. (Default password: 123456)

1)&

1)&

Method 2: Configured by USB (TS30x Only)
1. Download ToolBox software from Milesight official website.
2. Remove the USB waterproof plug from the bottom of the device, and connect it to the computer via a type-C USB cable. After connected, the PDF file can be exported directly from the USB drive folder.
3. Open ToolBox software, select type as “General” and select the serial port as USB port, then type the login password (Default password: 123456) to login device to check and configure device. It’s suggested to change the default password for security reasons.

Quick Start Guide

Cloud App

All software & files can be downloaded from https://www.milesight.com/iot/resources/download-center/#documents

TS20x Device Installation

Milesight IoT Co., Ltd. www.milesight.com
Xiamen Milesight IoT Co., Ltd. Add: Building C09, Software Park Phase III, Xiamen 361024, Fujian,China

Wall Plugs and Screw Mounting

Cable-tie Mounting

TS30x Device Installation

Wall Plugs and Screw Mounting

Cover Screw Caps

1RWHWhen installing, ensure the LCD display is positioned vertically on the ground below eye level for clear visibility of the content.

Magnet Switch Installation (TS30x Only)

Fixed by Screws

Fixed by 3M Tape

Installation Example

Thermal Buffer Bottle
It is necessary to unplug the stopper inside the bottle cap, then restore the cap and insert the temperature probe into the bottle. When using, it can be placed to places like freezers and refrigerators to ensure more accurate temperature measurement.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Declaration for EU Compliance Lora: 863.2MHz-869.8MHz, max. output power: 8.19dBm NFC receiver: 13.56MHz

Documents / Resources

Milesight TS20x, TS30x Temperature Sensor [pdf] User Guide TS20x, TS30x, TS20x TS30x Temperature Sensor, TS20x TS30x, Temperature Sensor, Sensor

References

• User Manual