mifa F50 Wireless Portable Bluetooth Speaker User Manual
Warning
- To ensure proper use and trouble-free operation, please carefully read this user manual first.
- For the first use, a full charge is recommended.
- Please use and store the product at room temperature.
- Do not throw and drop the product to avoid damages.
- Do not expose the product to fire, high temperature, direct sunlight, etc.
- Do not use organic solvents or other chemicals to clean the product.
- Do not allow small particles to get into the product.
- Please keep volumes of the speaker moderate to avoid temporary or permanent hearing impairment.
- Do not dissemble the product, or make any modifications to the structure or any parts of it.
- Keep the product out of children’s reach.
- If the battery is not properly replaced, there will bean explosion accident, which can only be replaced with the same type of battery.
- Batteries (battery packs) can not be exposed to such conditions as sunshine, fire or similar overheating conditions.
Packing list
1x Bluetooth Speaker
1 x USB Type-C Charging Cable
1 x User Manual
1 x 3.5 mm Audio Cable
Keys function
Ports Functions
Bluetooth Connection
- Turn on the speaker Press and hold the power button for 2 seconds to turn on the speaker with a prompt sound. And the white LED light flashes indicating it is in the pairing mode.
- Connect it to your device Turn on the Bluetooth of your device and select Mifa_F50. Once the connection is completed, it will beep and the white LED light will stay on.
The speaker will connect to the last-connected device automatically once the device’s Bluetooth is turned on.
Specifications
| Technical Parameters | |
| Speaker Type | Portable Bluetooth Speaker |
| Loudspeaker | 50mm full range speaker |
| Audio Input | Bluetooth, Micro SD Card,Audio-in |
| Supported Storage | Up to 32 GB storage device |
| Bluetooth Version | Bluetooth 5.0 |
| Bluetooth Range | 10 Meters |
| Functions | |
| Support voice chat or phone call with the built-in mic | |
| Supported Media Type FLAC, WAV, WMA, Mp3 | |
Size: 107.5 *98.3 * 56.7 mm
Weight: 497g (including the built-in Lithium battery)
Trouble Shooting
| FAQ Solutions | |
| Not able to connect to your device | 1. Restart the speaker and try again |
| 2. If your device requires a Pin Code, please enter 0000 | |
| Keeps cutting out when playing | Please ensure the speaker is within the operating range and there are no obstacles between the speaker and the device |
| Not able to play the music in Micro SD card |
|
| No sound when playing |
|
| No sound in AUX-in mode | Please ensure the audio cable is connected well |
| Not able to turn on | Please try to charge the speaker for about 3 hours |
| No respond to any operation | Please try to reset the speaker by pressing the reset button in the charging indicator jack |
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction FCC ID: 2AX0X-F50
Just Enjoy
MIFA INNOVATIONS LLC
www.mifa.net Designed in US Made in China
Copyright 0 MIFA. All rights reserved.
MIFA, the MIFA logo and other MIFA marks are all owned and registered by MIFA INNOVATIONS LLC. All other trademarks are the property of their respective owners.
The information contained here is subject to change without prior notice.
Documents / Resources
 |
mifa F50 Wireless Portable Bluetooth Speaker [pdf] User Manual F50, 2AXOX-F50, 2AXOXF50, F50 Wireless Portable Bluetooth Speaker, Wireless Portable Bluetooth Speaker |
