Midea MAW08V1QWT Window Type Air Conditioner -- logo

Window Type Air Conditioner
Models
MAW08V1QWT
MAW10V1QWT
MAW12V1QWT
version A – 03 – 2020
Midea MAW08V1QWT Window Type Air Conditioner -- logo.pngConditioner

Installation Guide
Scan the following QR code for an installation video.

Midea MAW08V1QWT Window Type Air Conditioner -- QR codhttps://l.ead.me/bb0pQC

You must follow the user manual for detailed installation instructions Before using your air conditioner, please read the user manual carefully and keep for future reference. For additional support, please call version A – 03 – 2020 customer service at 1-866-646-4332.

TOOL & HARDWARE

Required Installation Hardware

Midea MAW08V1QWT Window Type Air Conditioner -- Required 1/2” Type B Screw 2
Midea MAW08V1QWT Window Type Air Conditioner -- Required 1/4” Type B Screw 2
Midea MAW08V1QWT Window Type Air Conditioner -- Bracket Main Bracket 1
Midea MAW08V1QWT Window Type Air Conditioner -- Right Extension Arm Right Extension Arm
(For 26”-36” windows)
1
Midea MAW08V1QWT Window Type Air Conditioner -- Right Extension Right Extension Arm – Short
(For 22”-26” windows)
1
Midea MAW08V1QWT Window Type Air Conditioner -- Main Support Pin Main Support Pin 2
Midea MAW08V1QWT Window Type Air Conditioner --Cotter Pin Cotter Pin 2
Midea MAW08V1QWT Window Type Air Conditioner -- Screw 1/2” Type A Screw 3
Midea MAW08V1QWT Window Type Air Conditioner --Open Open Window Bracket – RH 1
Midea MAW08V1QWT Window Type Air Conditioner -- Window Open Window Bracket – LH 1
Midea MAW08V1QWT Window Type Air Conditioner -- Side Arm Side Arm Foam 2

Optional Installation Hardware

Midea MAW08V1QWT Window Type Air Conditioner -- Window- Window Sash Lock 1
Midea MAW08V1QWT Window Type Air Conditioner -- Thick Window Thick Window Sash Seal Foam 1
Midea MAW08V1QWT Window Type Air Conditioner -- Seal Foam Thin Window Sash Seal Foam 1
Midea MAW08V1QWT Window Type Air Conditioner -- Sealing Foam Miscellaneous Sealing Foam 1
Midea MAW08V1QWT Window Type Air Conditioner -- Arm Foam Additional Side Arm Foam 2
Midea MAW08V1QWT Window Type Air Conditioner -- A Screw 1” Type A Screw 2

Midea MAW08V1QWT Window Type Air Conditioner -- WARNINGWARNING
Do not use any devices or materials for installation that are not recommended in this manual.

WINDOW REQUIREMENTS

Midea MAW08V1QWT Window Type Air Conditioner -- WINDOW REQUIREMENTS

INSTALL THE SUPPORT BRACKET

Midea MAW08V1QWT Window Type Air Conditioner -- WARNINGWARNING
• Bracket should only be used for its intended purpose. If not, the warranty will be voided.
• You must follow the detailed installation instructions in the user manual.

Midea MAW08V1QWT Window Type Air Conditioner -- Adjust the left extensionMidea MAW08V1QWT Window Type Air Conditioner -- Adjust the angled

Midea MAW08V1QWT Window Type Air Conditioner -- WINDOW REQUIREMENTS-

INSTALL THE SUPPORT BRACKET (cont.)

1.3 Secure the bracket to the window with a screw at the end of each extension arm as shown. Holes at the end or bottom of the Extension Arms can be used to secure the Support Bracket to the window.Midea MAW08V1QWT Window Type Air Conditioner -- INSTALL THE SUPPORT

SECURE THE UNIT ON THE BRACKET

2.1 Set the air conditioner on the support bracket and fold down the sidearm hinges.
Midea MAW08V1QWT Window Type Air Conditioner -- Set the air conditionerMidea MAW08V1QWT Window Type Air Conditioner -- WARNING WARNING
Do not leave the unit unattended during installation.

2.2 You must install the Open Window Brackets.
Midea MAW08V1QWT Window Type Air Conditioner -- You must install -Midea MAW08V1QWT Window Type Air Conditioner -- WARNING WARNING
Failing to do this could cause injury or property damage.

SEAL AND CLOSE THE WINDOW

3.1 Measure, cut and install the side arm foam.
Midea MAW08V1QWT Window Type Air Conditioner -- SEAL AND CLOSEMidea MAW08V1QWT Window Type Air Conditioner -- WARNING WARNING
Do not leave the unit unattended during installation.

3.2 Secure the anti-tip brackets into the window track and then close the window.Midea MAW08V1QWT Window Type Air Conditioner -- Top view

Midea MAW08V1QWT Window Type Air Conditioner -- WARNING WARNING
You must extend the Anti-Tip Brackets into the Window Track Opening. Failure to follow this warning may cause serious injury.

3.3 Use the included foam to seal any gaps between the window and the air conditioner.
Midea MAW08V1QWT Window Type Air Conditioner -- Check3.4 Extend both window locks located in the window slot. For additional security, install the window sash lock.
Midea MAW08V1QWT Window Type Air Conditioner -- Extend both windowFAQ Why does the air conditioner not start?

  • Wall plug disconnected. Push plug firmly into a wall outlet.
  • House fuse has blown or circuit breaker tripped. Replace the fuse with time delay type or reset circuit breaker.
  • Check if the light on the plug is on. If it is off, press the RESET button.
  • Power is OFF. Turn power ON.

FAQ Why is there noise during cooling?

  • It is normal to hear airflow, set to a slower fan setting if too loud.
  • Window vibration – poor installation. Refer to installation instructions or check with the installer.

FAQ Unit will not connect to Wifi or App does not work?
For additional support and troubleshooting tips, follow the link in this QR code.

Midea MAW08V1QWT Window Type Air Conditioner -- FAQhttps://l.ead.me/bbO81S

Documents / Resources

Midea MAW08V1QWT Window Type Air Conditioner [pdf] Installation Guide
MAW08V1QWT, MAW10V1QWT, MAW12V1QWT, Window Type Air Conditioner

Leave a comment

Your email address will not be published.