Micsig logo

ACP1000 AC Current Probe
User ManualMicsig Instruments ACP1000 AC Current Probe

The ACP1000 AC current probe is clamp-on core design.
It tests the circuit current safely and directly without disconnecting the circuit. This method permits a safe,easy and portable current measurement.

FEATURES

  • Good appearance
  • Clamp-on core design safer, easier installation without disconnecting the circuit to test
  • Current or three specs voltage outputignal

APPLICATIONS

  •  Current, ower energypower factor correction device
  • Industrial control device
  • Oscilloscope andharmonic wavesnalyzer

SPECIFICATIONS

  • Current range: 0.1A-1000A
  • Maximum working current: 2000A
  • Output signal: mV/A
  • Operating frequency: 10Hz–100kHz
  • Maximum accuracy: 1%
  • Operating Temperature: -15ºC to 60ºC
  • Safety class: CAT III 600V
  • Maximum conductor diameter: 2.05 inches (52mm)
  • Dimensions: 4.37 in. x 8.50 in. x 1.77 in. (111x216x45mm)
  • Output cable: 1.5m BNC insulated coaxial output cable can connect directly to an oscilloscope, and can be used with Multimeters with optionalBNC/Banana adapter.
  • Environmentl compliance: RoHS compliane

PERFORMANCES

Model I nut current p (A) Output signal Frequency
(Hz)
Secondary burden
(Ohms)
Accuracy class
k CP1000 0.1-10 100mV/A 10-100K >100K 3%±10mV
0.1-100 10mV/A 2%±5mV
1-1000 lmV/A 1%±1mV

Notes:Accuracies are given for 48 Hz to 65Hz;the ambient temperature of 25º C±3º C.
CHARACTERISTIC PERFORMANCE CURVEMicsig Instruments ACP1000 AC Current Probe - PERFORMANCE

Micsig warrants that this current probe will be free from defects in materials and workmanship for a period of one(1) year. If any such product proves defective during this warranty period, Micsig, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product. Parts, modules and replacement products used by Micsig for warranty work may be new or reconditioned to like new performance. All replaced parts, modules and
products become the property of Micsig.

Shenzhen Micsig Instruments Co., Ltd.
Add: 1F, Bldg A, Huafeng International Robot Industrial Park, Hangcheng
Avenue, Xixiang Sub-district, Bao’an District, Shenzhen, China
TEL: +86-755-88600880
WEB: www.micsig.com E-mail: sales@micsig.com

Documents / Resources

Micsig Instruments ACP1000 AC Current Probe [pdf] User Manual
ACP1000 AC Current Probe, ACP1000, AC Current Probe, Current Probe

References

Leave a comment

Your email address will not be published. Required fields are marked *