Unveil Real Signal You've Never Seen - Micsig
User Manual for Micsig Instruments models including: ACP1000 AC Current Probe, ACP1000, AC Current Probe, Current Probe
Micsig ACP1000 Strommesszange
File Info : application/pdf, 1 Pages, 690.14KB
DocumentDocumentACP1000 AC Current Probe User Manual The ACP1000 AC current probe is clamp-on core design. It tests the circuit current safely and directly without disconnecting the circuit. This method permits a safe,easy and portable current measurement. FEATURES · Good appearance · Clamp-on core design safer, easier installation without disconnecting the circuit to test · Current or three specs voltage outputignal APPLICATIONS · Current, ower energypower factor correction device · Industrial control device · Oscilloscope andharmonic wavesnalyzer Shenzhen Micsig Instruments Co., Ltd. Add: 1F, Bldg A, Huafeng International Robot Industrial Park, Hangcheng Avenue, Xixiang Sub-district, Bao'an District, Shenzhen, China TEL: +86-755-88600880 WEB: www.micsig.com E-mail: sales@micsig.com SPECIFICATIONS · Current range: 0.1A-1000A · Maximum working current: 2000A · Output signal: mV/A · Operating frequency: 10Hz100kHz · Maximum accuracy: 1% · Operating Temperature: -15ºC to 60ºC · Safety class: CAT III 600V · Maximum conductor diameter: 2.05 inches (52mm) · Dimensions: 4.37 in. x 8.50 in. x 1.77 in. (111x216x45mm) · Output cable: 1.5m BNC insulated coaxial output cable can connect directly to an oscilloscope, and can be used with Multimeters with optionalBNC/Banana adapter. · Environmentl compliance: RoHS compliane PERFORMANCES Model Input current (A) Output signal ACP1000 0.1-10 0.1-100 1-1000 100mV/A 10mV/A 1mV/A Frequency (Hz) 10-100K Secondary burden (Ohms) Accuracy class 100K 3%±10mV 2%±5mV 1%±1mV Notes:Accuracies are given for 48 Hz to 65Hz;the ambient temperature of 25º C±3º C. CHARACTERISTIC PERFORMANCE CURVE 100 Ratio: 1000:1 ; Frequency: 50 Hz ; 90 80 Burden 1 Ohms ;temperature 25º C. Phase( I) 70 60 (I ) 50 35 40 30 0 30 Phase(I ) 25 20 -1 15 10 5 -2 0 -3 Amplitude f(I) % -0.1 Amplitude f(I) % f(I) % -4 1A 10A 100A -0.2 100A 1000A 10000A ( I ) f(I) % Micsig warrants that this current probe will be free from defects in materials and workmanship for a period of one(1) year. If any such product proves defective during this warranty period, Micsig, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product. Parts, modules and replacement products used by Micsig for warranty work may be new or reconditioned to like new performance. All replaced parts, modules and products become the property of Micsig.