User Manual for MICROTECH models including: 141730155 Offset Digital Caliper, 141730155, Offset Digital Caliper, Digital Caliper, Caliper
Offset centerline digital caliper IP54 - MICROTECH - Innovative measuring instruments
MICROTECH HAND FINISHED 5m IP54 ISO 17025 CALIBRATION OFFSET DIGITAL CALIPER MICROTECH USER MANUAL Calibration ISO 17025:2017 ISO 9001:2015 MICROTECH MODIFICATIONS Item No 141730155 141731205 141730305 Range mm inch 10-160 0.4-6" 10-210 0.4-8" 10-310 0.4-12" Resolution mm 0,005 Accuracy m ±30 ±40 ±60 Anvil D mm 10 10 10 Waterproof Display IP54 IP54 Digit height 9mm IP54 Switch between metric and English measurement systems ON/OFF function BUTTON FUNCTIONS ORIGIN function after battery change (Press 5 sec) Switching between absolute and relative measurement (display INC) or setting ZERO FUNCTIONS IP54 ELECTRONICS HAND FINISHED SURFACES CR1632 3V BATTERY MM/INCH POSITION MEMORIZED AUTO WAKE UP & SWITCH OFF OPERATION INSTRUCTIONS MICROTECH 3.1 Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth. 3.2 If necessary, open the battery cover; insert the battery (type CR1632) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery. It will be indication on display «-------» after battery chnging. Press ORIGIN button for 5 sec to start reading system. 3.3 During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object. 3.4 After finishing work wipe the measuring surfaces of the caliper with a cloth soaked in gasoline and apply anticorrosion oil. WARNING! IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED: Scratches on the measuring surfaces; Measuring the size of object in the process of machining; Shocks or dropping, avoid bending of rod or other surfaces. MICROTECH Change without prior notice Edition: M1019_1018Adobe PDF Library 15.0 Adobe InDesign CC 13.1 (Macintosh)