MICROTECH 141081192 Wireless Digital Preset Caliper
SPECIFICATION
| Item No | Range | Reso- lution | Accu- racy | Jaws | Protection | Round rod | mm/inch | Auto on/off | WIRELESS | |
| mm | inch | mm | μm | |||||||
| 141081192 | 0-150 | 0-6” | 0,01 | ±20 | 40/16 | IP-54 | • | • | • | |
| 141081192R | • | • | • | • | ||||||
| 141081292 | 0-200 | 0-8” | ±20 | 50/17 | • | • | • | |||
| 141081392 | 0-300 | 0-12” | ±30 | 60/20 | • | • | • | |||
MAIN INFO
- Wipe with a clean cloth, soaked in gasoline, measure the surface of the frame, and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
- If necessary, open the battery cover; and insert the battery (type CR2032) according to the polarity of the electrodes. Blinking display information or absence suggests replacing the battery.
- During the measurement, measuring jaws should to sum to the measured object without knocking.
- During the measurement avoid warps on the measuring surfaces of the instrument. The measuring surface must be fully in contact with the measurement object.
- WARNING! IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED: Scratches on the measuring surfaces;
- Measuring the size of an object in the process of machining;
- Shocks or dropping, avoid bending of the rod or other surfaces.
WIRELESS DATA
WIRELESS DATA TRANSFER MODES
MICROTECH caliper with Built-in Wireless data output module for transfer results 
WIRELESS DATA TRANSFER CONNECTION
Wireless Mode (Indicated by Orange LED)
- This mode is designed for data transmission to the MDS software. When activated, the caliper will transmit measurement data wirelessly to the program. The orange LED indicates that the caliper is in Wireless Mode.
Wireless Energy Saving Mode (Indicated by Red LED)
- This mode conserves energy while maintaining wireless capabilities. To activate Wireless Energy Saving Mode, enable this setting in the MDS software. The caliper will switch to this mode, indicated by a red LED.
Bluetooth HID Mode (Indicated by Green LED)
- This mode allows synchronization with measurement devices via Bluetooth using the Human Interface Device (HID) protocol. The green LED indicates that the caliper is in Bluetooth HID Mode.
Bluetooth HID + MAC Mode (Indicated by Green and Orange LEDs)/
- This mode provides additional functionality by combining HID protocol with MAC address recognition. When active, both green and orange LEDs will be illuminated.
Switching Between Modes
- To switch between the different modes, press and hold the data transmission button for 7 seconds. During the switching process, all LEDs (orange, green, and red) will light up, indicating that the caliper is transitioning to a new mode.
POWER CONSUMPTION
| MODE | TRANSFER DATA | |
| WIRELESS OFF | 45 μA | |
| WIRELESS TO MDS | STANDARD | 2.0 mA |
| ECO (GATT) | 45-100 μA | |
| WIRELESS HID | 0.4 mA | |
| WIRELESS HID+MAC | 0.4 mA | |
DOWNLOAD THE MICROTECH MDS APP
Link to to Download MICROTECH MDS app for Windows, Android, iOS, and macOS on www.microtech.tools
RECOMENDATIONS
- MICROTECH
- innovative measuring instruments
- 61001, Kharkiv, Ukraine, str. Rustaveli, 39
- tel.: +380577390350
- www.microtech.ua
- tool@microtech.ua
- Change without prior notice Edition: M1031_0922
Documents / Resources
 |
MICROTECH 141081192 Wireless Digital Preset Caliper [pdf] User Manual 141081192, 141081192 Wireless Digital Preset Caliper, Wireless Digital Preset Caliper, Digital Preset Caliper, Preset Caliper, Caliper |
