METRIA TIME-W24-001 24h Clock Timer
The 24-hour Clock (timer), reference TIME-W24-001, has a Clock function (12/24 hours), Stopwatch function, and Countdown timer function.
NOTE:
One LR44H button battery is included. Remove the protective paper from inside the battery compartment before using it for the first time.
12/24 hour setting
Select the 12/24 system using the red selector on the side.
Time setting
- Press the MODE button to enter CLOCK mode.
- Adjust the hours, minutes, and seconds employing the buttons H, M, and S respectively. By pressing each key for more than 2 seconds, the advance is faster.
Timer Operation
- Press the MODE button to enter TIMER mode, 00:00:00 appears on the display.
- Press the START button to start timing (COUNT-UP mode)
- To stop it, press the STOP button.
- Press the RESET button to reset the values.
Countdown timer operation
- Press the MODE button to enter TIMER mode, 00:00:00 appears on the display.
- Set the desired countdown time using buttons H, M, and S respectively.
- Press the START button to start the countdown.
- If you want to pause the countdown, press the START button again.
- To stop it, press the STOP button.
- Press the RESET button to reset the values.
Memory function
When the time is up, the last entered time record can be accessed by pressing the MEMORY button.
Documents / Resources
 |
METRIA TIME-W24-001 24h Clock Timer [pdf] User Manual TIME-W24-001, TIME-W24-001 24h Clock Timer, 24h Clock Timer, Clock Timer, Timer |
