MEAN WELL RS-100-3.3 100W Single Output Switching Power Supply

MEAN WELL RS-100-3.3 100W Single Output Switching Power Supply

Features

  • Universal AC input/ Full range
  • Protections: Short circuit/ Overload/ Over voltage
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • All using 105″C long life electrolytic capacitors
  • Withstand 300VAC surge input for 5 second
  • High operating temperature up to 70°C
  • Withstand 5G vibration test
  • High efficiency, long life and high reliability
  • 3 years warranty

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

SPECIFICATION

MODEL RS-100-3.3 RS-100-5 RS-100-12 RS-100-15 RS-100-24 RS-100-48
OUTPUT DC VOLTAGE 3.3V 5V 12V 15V 24V 48V
RATED CURRENT 20A 16A 8.5A 7A 4.5A 2.3A
CURRENT RANGE 0 ~ 20A 0 – 16A 0 – 8.5A 0 – 7A 0 – 4.5A 0- 2.3A
RATED POWER 66W BOW 102W 105W 108W 110.4W
RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p
VOLTAGE ADJ. RANGE 3.2V ~ 3.5V 4.75 ~ 5.5V 11.4~ 13.2V 14.25 – 16.5V 22.8 – 26.4V 45.6 – 52.8V
VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION Note.5 ±2.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME 500ms , 20ms/230VAC  1200ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.) 95ms/230VAC  17ms/115VAC at full load
INPUT VOLTAGE RANGE 88 – 264VAC  125- 373VDC (Withstand 300VAC surge for 5sec. Without damage)
FREQUENCY RANGE 47 – 63Hz
EFFICIENCY (Typ,) 74% 77% 81% 82% 84% 84%
AC CURRENT (Typ.) 2.5A/115VAC         1.5A/230VAC
INRUSH CURRENT (Typ,) COLD START 40A/230VAC
LEAKAGE CURRENT <2mA/ 240VAC
PROTECTION OVERLOAD 110 – 150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 3.8 ~ 4.45V 5.75 – 6.75V 13.8 – 16.2V 17.25 – 20.25V 27.6 – 32.4V 55.2 – 64.8V
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT WORKING TEMP. -25- +70°C (Refer to “Derating Curve”)
WORKING HUMIDITY 20 – 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85″C, 10-95% RH
TEMP. COEFFICIENT ±0 03%/C (0 – 50”C)
VIBRATION 10 – 500Hz, 5G 1Omin./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 6) SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1 , AS/NZS 62368.1, EAC TP TC 004 approved
WITHSTAND VOLTAGE I/P-O/P3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE 1/P-0/P, 1/P-FG, 0/P-FG:1 QOM Ohms/ 500VDC / 25″Ci 70% RH
EMC EMISSION Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2 (BS EN/EN50082-2) , heavy industry level, EAC TP TC 020
OTHERS MTBF 3196.6K hrs min.    Telcordia SR-332 (Bellcore); 526.7K hrs min.      MIL-HDBK-217F (25°C)
DIMENSION 159’97’38mm (L’W’H)
PACKING 0.6Kg; 24pcs/15.4Kg/0.83CUFT
NOTE
  1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25″C of ambient temperature.
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. Line regulation is measured from low line to high line at rated load.
  5. Load regulation is measured from 0% to 100% rated load.
  6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
  7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
  8. The ambient temperature derating of 3.5°C /1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft) Product Liability Disclaimer : For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Mechanical Specification

Mechanical Specification

Terminal Pin No. Assignment

Pin No. Assignment Pin No. Assignment
1 AC/L 4,5 DCOUTPUT-V
2 AC/N 6,7 DCOUTPUT+V
3 FG-½

Block Diagram

Block Diagram

Derating Curve

Derating Curve

Static Characteristics

Static Characteristics

Customer Support

Symbols

QR Code

Arrow.com

MEAN Logo

Documents / Resources

MEAN WELL RS-100-3.3 100W Single Output Switching Power Supply [pdf] Owner's Manual
RS-100-3.3 100W Single Output Switching Power Supply, RS-100-3.3, 100W Single Output Switching Power Supply, Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply, Supply

References

Leave a comment

Your email address will not be published. Required fields are marked *