DDR-30 series
30W DIN Rail Type DC-DC Converter
Feature
- Width only 35mm (2SU)
- 4:1 ultra wide input range
- -40-1-135°C wide working temperature
- No minimum load required
- DC output adjustable (±10%)
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- Protections: Short circuit / Overload / Over voltage / Input reverse polarity / Input under voltage protection
- 4KVdc I/O isolation(Reinforced isolation)
- 3 years warranty
Applications
- Industrial control system
- Semi-conductor fabrication equipment
- Factory automation
- Electro-mechanical
- Wireless network
- Telecom or datacom system
GTIN CODE
MW Search: http://www.meanuwell
Description
DDR-30 series is a 30W DIN Rail type DC-DC converter with main features including DIN rail-type easy installation, ultra slim width (35mm), 4:1 ultra wide input voltage, -40-+85°C wide operating temperature, 4KVdc I/O isolation, adjustable output voltage (± 10%) and full protective functions…etc.
This series has two input options: 9-36V /18-75V and various output options: 5V / 12V / 15V / 24V and can be used for industrial control, security control, communication system and other fields. Suitable applications are DC buck/boost regulator, increasing system insulation level and voltage drop compensation along cable…etc.
Model Encoding
| MODEL | DDR-30G-5 | DDR-30G-12 | DDR-30G-15 | DDR-30G-24 | DDR-30L-5 | DDR-30L-12 | DDR-30L-15 | DDR-30L-24 | ||||||
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V | 5V | 12V | 15V | 24V | |||||
| RATED CURRENT | 6A | 25A | 2A | 1.25A | 6A | 2.5A | 2A | I.25A | ||||||
| CURRENT RANGE | 0 ∼ 6A | 0 ∼ 2.5A | 0 ∼ 2A | 0∼1.25A | 0 ∼ 6A | 0 ∼ 2.5A | 0 ∼ 2A | 0∼125A | ||||||
| RATED POWER | 30W | 30W | 30W | 30W | 30W | 30W | 30W | 30W | ||||||
| RIPPLE & NOISE (max.) Note.2 | 60mVp-p | 75mVp-p | 75mVp-p | 100mVp-p | 60mVp-p | 75mVpb | 75mVp-p | 100mVp-p | ||||||
| VOLTAGEADJ. RANGE | 4.5- 5.5V | 9- 13.2V | 13.5 – 16.5V | 21.6 – 28V | 4.5- 5.5V | 9- 13.2V | 13.5 – 16.5V | 21.6- 28V | ||||||
| VOLTAGE TOLERANCE Nott3 | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ||||||
| LINE REGULATION | ±0.5% | ±05% | ±0.5% | ±0.5% | ±05% | ±0.5% | ±0.5% | ±0.5% | ||||||
| LOAD REGULATION | ±1.5% | ±05% | ±0.5% | ±0.5% | ±15% | ±0.5% | ±0.5% | ±0.5% | ||||||
| SETUP, RISE TIME | 120ms, 85ms at full load | |||||||||||||
| HOLD UP TIME (lyp.) | G-type:7ms@24Vdc input | L-type: 18ms@48Vdc input | ||||||||||||
| EXTERNAL CAPACITANCE LOAD (Max.) | 3300 μF | 2200 μF | 1500 μF | 1000 μF | 3300 μF | 2200 μF | 1500 μF | 1000 μF | ||||||
| INPUT | VOLTAGE RANGE Note.4 | 9∼36Vdc | 18∼75Vdc | |||||||||||
| EFFICIENCY (Typ.) | 85% | 186% | I87% | 89% | 86% | I89% | I90% | I91% | ||||||
| DC CURRENT (Typ.) | 1.5A/24Vdc | 0.8A/48Vdc | ||||||||||||
| INRUSH CURRENT (Typ.) | 15A /24Vdc | 15A /48Vdc | ||||||||||||
| PROlECION | OVERLOAD | 110 – 150% rated output power | ||||||||||||
| Protection type : Constait current limiting, recovers autanaticaly after fait condition is removed | ||||||||||||||
| OVER VOLTAGE | 5.75∼7V | 113.8∼16.2V | 117 25∼20.29/ | 128.8∼ 34V I S75 – 7V | 113.8∼162V | 117.25∼2025V | 128.8∼34V | |||||||
| Protection type : Shutdown o/p voltage, re-power on to recover | ||||||||||||||
| REVERSE POLARITY | By internal MOSFET, no damage, recovers automaticaly after fault coma lion removed | |||||||||||||
| UNDER VOLTAGE LOCKOUT | 24Vin (G-type):Power ON ≥ 9V , OFF ≥ 8.5V | |||||||||||||
| 48Vin (L-type):Power ON ≥ 18V , OFF ≥ 17V | ||||||||||||||
| ENYIKSMENT | WORKING TEMP. | -40 ∼ +85ºC (Refer to ‘Derating Curve, | ||||||||||||
| WORKING HUMIDITY | 5 ∼ 95% RH non-condensing | |||||||||||||
| STORAGE TEMP., HUMIDITY | -40 ∼ +85ºC .5 ∼ 95% RH non-condensng | |||||||||||||
| TEMP. COEFFICIENT | ±0.03%/ºC (0 ∼ 60ºC ) | |||||||||||||
| VIBRATION | Component:10 -500Hz, 2G 1Ortin./1cyde, 60mki. each along X, Y, 2 axes; Mounting: Compiance to IEC600684-6 | |||||||||||||
| OPERATING ALTITUDE | 5000 meters | |||||||||||||
| SAFETY & EMC (Note 5) |
SAFETY STANDARDS | HUI EC 62368-1 ,AS!NZS 62368.1 approved; Desigi refer to UL508 | ||||||||||||
| WITHSTAND VOLTAGE | I/P-0/P:4KVdc | |||||||||||||
| ISOLATION RESISTANCE | I/P-01P>100M Ohms/ 500Vdc/ 25ºC/70% RH | |||||||||||||
| EMC EMISSION | Parameter | Standard | Test Level! Note | |||||||||||
| Conducted | BS EN/EN55032 | Class B | ||||||||||||
| Radiated | BS E N/E N55032 | Class B | ||||||||||||
| Voltage Flicker | BS EN/EN61000-3-3 | — | ||||||||||||
| EMC IMMUNITY | BS E N/E N55035 . BS E N/E N61000-6-2(BS EN/EN50382-2) | |||||||||||||
| Parameter | Standard | Test Level! Note | ||||||||||||
| ESD | BS EN/EN61030-4.2 | Level 3. 8IW air : Level 3. 6IW contact: criteriaA | ||||||||||||
| Radiated | BS EN/EN61000-4-3 | Level 3, 10V/m ;criteria A | ||||||||||||
| EFT/ Burst | BS E N/E N61030-4-4 | Level 3. 2KV; criteria A | ||||||||||||
| Surge | BS EN/EN61000-4-5 | Level 3, 1KV/Line-Line;criteria A | ||||||||||||
| Conducted | BS E N/E N61030-4-6 | Level 3, WV ; critenaA | ||||||||||||
| Magnetic Field | BS EN/EN61000-4-8 | Level 4, 30A/m ;criteria A | ||||||||||||
| OTHERS | MTBF | 2780.3K hrsmn. Telcordia SR-332 (Be core) ;483.8K hrs min. MIL-HDBK-217F (25(:) | ||||||||||||
| DIMENSION | 35’90’54.5mrn (WH’D) | |||||||||||||
| PACKING | 0.12K9;96pcs/12.5K9/1.1CUFT | |||||||||||||
| NOTE | 1. All parameters NOT specially mentioned are measured at normal input (G24Vdc, L:48Vdc), rated load and 25’C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 of & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Denting may be needed under low input voltage. Please check the denting curve for more details 5. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives For guidance on how to perform these EMC tests, please refer to ‘EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature denting of 3.5t/1000m with fanless models and of 5t/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability Disclaimer: For detailed information. please refer to https://www.meanwell.com/serviceDisclaimer.aspx |
|||||||||||||
Block Diagram
Derating Curve
Output derating VS input voltage
Mechanical Specification
(Unit: mm , tolerance ± 0.5mm)
Terminal Pin No. Assignment
| Pin No. | Assignment |
| 1 | DC Output +Vo |
| 2 | DC Output -Vo |
| 3 | DC Input -Vin |
| 4 | DC Input +Vin |
Installation Manual
Please refer to: http://www.meanwell.com/manual.html
https://www.meanwell.com/Upload/PDF/DDR%20DIN%20rail%20power%20supply.pdf
Downloaded from Arrow.com.
File Name:DDR-30-SPEC 2022-09-20
Documents / Resources
 |
MEAN WELL DDR-30 Series 30W DIN Rail Type DC-DC Converter [pdf] Instruction Manual DDR-30 Series 30W DIN Rail Type DC-DC Converter, DDR-30 Series, 30W DIN Rail Type DC-DC Converter, Rail Type DC-DC Converter, DC-DC Converter, Converter |
 |
MEAN WELL DDR-30 Series 30W DIN Rail Type DC-DC Converter [pdf] Owner's Manual DDR-30 Series 30W DIN Rail Type DC-DC Converter, DDR-30 Series, 30W DIN Rail Type DC-DC Converter, DIN Rail Type DC-DC Converter, Rail Type DC-DC Converter, DC-DC Converter, Converter |
