MAYFLASH PS5 Adapter Instructions

MAYFLASH PS5 Adapter

Specifications:

• Product: MAYFLASH Adapter for PS5
• Compatibility: PS4/PS5 controllers, JOYSTICK (e.g., MAYFLASHF300, F500), FPS gaming adapters (e.g., MAYFLASH MAX SHOOTER ONE,HAMA Speedshot)
• Modes: PS4 mode (LED blue), PS5 mode (LED white)
• Connection: Plug and play, no driver needed
• Update Method: Firmware update via PC
• Manufacturer: MAYFLASH

Product Usage Instructions

How to Connect:

1. Connect your JOYSTICK or FPS gaming adapter that requires a wired PS4/PS5 controller to your PS4/PS5 game console.
2. Plug the adapter into the USB slot of your JOYSTICK or FPS GAMING adapter. LED blue for PS4 and LED white for PS5.
3. Press the mode switch for 3 seconds to change to the desired mode.
4. Once successfully identified, the LED on the adapter will stay lit.

How to Update:

1. Download the latest firmware from MAYFLASH official website.
2. Run the software on your Windows PC.
3. Press and hold the MODE switch, then plug the adapter into a USB port on your PC.
4. Once recognized, select Update.
5. Do not disconnect the device until you receive confirmation that the update was successful.

Warning:
Changes or modifications not approved may void the user’s authority to operate the equipment. Ensure compliance with FCC Rules.

Note:
This device complies with FCC Radiation exposure limits. Maintain a minimum distance of 20cm between the equipment and your body.

MAYFLASH NEW adapter for PS5
Function sample is available.

INSTRUCTION

Short Instruction

This adapter provides a good solution when you must connect a wired PS4/PS5 controller to your JOYSTICK (Like MAYFLASH F300,F500 ), or FPS gaming adapter (like MAYFLASH MAX SHOOTER ONE, HAMA Speedshot.) on both PS4 & PS5 system.

Plug & play, no need driver.

It has two modes. LED blue is for PS4 mode, LED white is for PS5 mode.

How to connect

1. Connect your joystick or FPS gaming adapter that need a wired PS4/PS5 controller to your PS4/PS5 game console.
2. Plug this adapter into the USB slot of your joysticks or FPS GAMING adapter. LED blue is for PS4. LED White is for PS5. Press the mode switch for 3 seconds to change mode you need.
3. Once the joysticks or FPS gaming adapter have been identified successfully, the LED on the adapter will stay lit.

How to update

1. Download the latest firmware from MAYFLASH official website https://www.mayflash.com/Support/
2. Run the software at your windows PC.
3. Press and hold the MODE switch and plug the adapter to USB port of PC.
4. As soon as the adapter has been recognized, select “Update”
5. Do not disconnect the device until you are informed that the updated was completed successfully.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FAQ

Q: Do I need to install any drivers for the adapter?
A: No, the adapter is plug and play and does not require any drivers.

Q: How can I switch between PS4 and PS5 modes?
A: Press the mode switch on the adapter for 3 seconds to change between PS4 (LED blue) and PS5 (LED white) modes.

Q: Where can I download firmware updates for the adapter?
A: Firmware updates can be downloaded from the MAYFLASH official website at https://www.mayflash.com/Support/