MATT BLATT Amber Bench Stool (Small)

COMPONENTS

1. Stool cover (x1)
2. Leg (x2)
3. Leg (x2)
4. Rack (x1)

Hardware

1. Dowel(x4)
2. Split washer (x4)
3. Washer (x4)
4. Nut (x4)
5. Screw (x4)
6. Wrench (xl)
7. Adhesive pad (x4)

ASSEMBLY

Step 1: Screw in the dowels (A) into the top of all legs

Step 2: 

• Turn the stool cover over to expose the underside.
• With the legs (2 & 3) standing dowel end facing down on the corners of the stool cover (1), place a washer (C) and split washer (B) all the way to the end of each dowel (A).
• Put one nut (4) onto each dowel (A) and tighten using the wrench (F) until halfway down their length.

Step 3: Align and insert the rack (4) into the holes of the legs (2 & 3) to secure it in place.

Step 4: Using the wrench (F), tighten the nuts (D) on the dowels (A) all the way down the dowel’s length until secure.

Step 5: Insert and secure the screws (E) into the holes of the rack. (4).
Then peel the adhesive pads (G) and attach them to the bottom of the legs

Step 6: Turn the bench stool right side up.

NEED MORE INFORMATION?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.mattblatt.com.au

Documents / Resources

MATT BLATT Amber Bench Stool (Small) [pdf] User Guide Amber Bench Stool Small

References

• User Manual