MDMAX BOX

Quick Start Guide

1. Connect PC to internet.
   Activation required before use of device.
2. Go to https://www.opusivs.com/support/downloads/matco-tools to download and run application setup*.
3. Connect device to PC first.
   Then connect the OBDII Cable to the device.
4. Once Windows has finished installing the application, follow on­-screen instructions to activate device.

Contact Opus IVS Support for J2534 and Device Support:

   734-222-5228 (Option 2, then 1)
  support@opusivs.com

* Device has been tested on Windows 10 and newer operating systems.
Legacy operating systems may work, but are not supported.

INST-MATCO-1

Documents / Resources

MATCO TOOLS MDMaxBox Maximus J2534 Vehicle Communication Interface [pdf] User Guide CUS-121619-1, MDMaxBox Maximus J2534 Vehicle Communication Interface, MDMaxBox, Maximus J2534 Vehicle Communication Interface

References

• User Manual