User Guide for MATCO TOOLS models including: CUS-121619-1, MDMaxBox Maximus J2534 Vehicle Communication Interface, MDMaxBox, Maximus J2534 Vehicle Communication Interface

DOWNLOAD

Matco Tools

Quick Start Guide

*evice has been tested on Windows 10 and newer operating systems. D Legacy operating systems may work, but are not supported. 1. Connect PC to internet.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 251.53KB

Quick Start Guide
1. Connect PC to internet. Activation required before use of device.
2. Go to https://www.opusivs.com/support/downloads/matco-tools to download and run application setup*.
3. Connect device to PC first. Then connect the OBDII Cable to the device.
4. Once Windows has finished installing the application, follow on­screen instructions to activate device.

Contact Opus IVS Support for J2534 and Device Support: (734) 222-5228 (Option 2, then 1) support@opusivs.com
* Device has been tested on Windows 10 and newer operating systems. Legacy operating systems may work, but are not supported.

INST-MATCO-1



References