Commander R-R-R Machines
Instruction Manual
Commander R-R-R Machines
- To drain the oil, twist off the screw pointed at the oil draining port. After the oil is drained re-tighten the screw.
- To fill the pump with oil, unscrew the lid pointed at the filling port. Fill the pump until the oil level reaches the mark that is on the pump.
NOTE: The oil needed is deep vacuum pump oil (viscosity (cSt) @ 40°C is 46 +/-10%.) - To reset the vacuum pump timer, follow the steps on the pictures below.
For further questions, please contact Mastercool (973-252-9119) and ask to speak with Tech Support.
www.mastercool.com
COMD-OIL-CHANGE-INST
Documents / Resources
 |
Mastercool Commander R-R-R Machines [pdf] Instruction Manual Commander R-R-R Machines, R-R-R Machines, Machines |