MARQUARDT MS7 Murano Smart Remote Key
The UK1 has four keys: Open, Close, Trunk and Frunk. On each button press, it initiates the communication to the MUB1 and the range measurement process.
Product Specifications
- Model: UK1
- Keys: Open, Close, Trunk, Frunk
- Communication: Initiates communication with MUB1
- Range Measurement Process: Activated on button press
- Access Technology: Integrated NFC
To unlock the vehicle’s doors when the button is pressed short.
Lock the doors when the button is pressed short.
To unlock and open the vehicle’s front trunk lid.
To unlock and open the vehicle’s trunk lid. In case the battery is low, car access is possible with integrated NFC technology.
MARQUARDT GmbH
Schloßstraße 16
D 78 604 Rietheim – Weilheim
Initial Version 10.11.2024 Version 1.0
Department RDEC-PU Datei
Editor Hrishikesh Nirgude Doku.-Nr.
Revision Seite Seite 1 von 1
FAQs
Q: How do I change the battery in the UK1?
A: To change the battery in the UK1, locate the battery compartment, remove the old battery, and insert a new one following the manufacturer’s instructions.
Q: What should I do if the keys are not working?
A: If the keys are not working, check the battery level first. If the issue persists, contact customer support for assistance.
Documents / Resources
 |
MARQUARDT MS7 Murano Smart Remote Key [pdf] User Manual IYZUK1, IYZUK1, uk1, MS7 Murano Smart Remote Key, MS7, Murano Smart Remote Key, Smart Remote Key, Remote Key |