MARLEY EM-JA027 UPLIFT Bookshelf Bluetooth Speakers
Specifications
- Model: EM-JA027
- Brand: UPLIFT
- Components: Left Speaker, Right Speaker, Mains Power Socket, AUX In, RCA Line In
- Control Features: Volume Down / Skip Backwards, Volume Up / Skip Forward, Play/Pause, Power / Mode Select
Product Usage Instructions
Connecting the Speakers
To set up the UPLIFT speakers, follow these steps:
- Identify the left and right speakers.
- Connect the left and right speakers using the provided cables.
Powering On and Pairing
Follow these steps to power on and pair the speakers:
- Plug the mains power socket into a power source.
- Press the Power / Mode Select button to turn on the speakers.
- Enter pairing mode by holding the Pairing Mode button for 3 seconds.
- Once paired, the Status LED will show a solid light.
Selecting Audio Input Mode
You can switch between different audio input modes using the Power / Mode Select button:
- Bluetooth (BT) Mode: Press the button once to switch to Bluetooth mode.
- AUX In Mode: Press the button twice to switch to AUX mode.
- RCA Line In Mode: Press the button three times to switch to RCA mode.
ATTENTION: PLEASE READ THE QUICK START GUIDE BEFORE USE
WHAT IN THE BOX
STATUS
LED INDICATION LEGEND
COMPONENTS
- A. Mains Power Socket
- B. AUX In
- C. RCA Line In
- D. LEFT SPEAKER OUT
- E. LEFT SPEAKER IN
- F. Status LED
- G. Volume Down / Skip Backwards
- H. Volume Up / SkipForward
- I. Pause e
- J. Power / Mode Select –
- BT / AUX IN / RCA Line In
BLUETOOTH
RCA INPUT
AUX INPUT
CONTROLS
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, punderpart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates und and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
WEEE EXPLANATION
- This marking indicates that this product should not be disposed o with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
- Hereby, FKA Brands Ltd declares that this radio equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.uk/declaration-of-conformity
Frequently Asked Questions
What should I do if the speakers are not pairing?
If you are facing issues with pairing, try the following steps:
- Ensure both speakers are powered on.
- Check that the device you are trying to pair with is within range.
- If issues persist, refer to the user manual for troubleshooting tips.
How do I adjust the volume or skip tracks?
To adjust volume or skip tracks, use the dedicated buttons on the speakers:
- Volume Down / Skip Backwards: Press to decrease volume or skip to the previous track.
- Volume Up / Skip Forward: Press to increase volume or skip to the next track.
Documents / Resources
 |
MARLEY EM-JA027 UPLIFT Bookshelf Bluetooth Speakers [pdf] User Guide EMJA027, PVB-EMJA027, PVBEMJA027, EM-JA027 UPLIFT Bookshelf Bluetooth Speakers, EM-JA027, UPLIFT Bookshelf Bluetooth Speakers, Bookshelf Bluetooth Speakers, Bluetooth Speakers, Speakers |