MARK MDX 0408 DSP Loudspeaker Processor
Product Specifications
- Model: MDX 0408
- Product Name: Central Control Codes User Manual
- RS232 Settings:
- Baudrate: 115200 Bit/s
- Parity bits: None
- Data bits: 8
- Stop bits: 1
- Control sending Interval: >200ms (presets load/save function >3s)
- TCP/IP Connecting Configuration:
- Transport protocol: TCP client
- IP address: refer to IP address information in LCD display, or check it in Software
- Network port: 8234
- Control sending interval: >200ms (when setting for Presets function >3s)
Product Usage Instructions
RS232 Connection
- Connect the RS232 cable to the designated port on the product.
- Set the Baudrate to 115200 Bit/s on your communication software.
- Ensure Parity bits are set to None, Data bits to 8, and Stop bits to 1.
- Adjust the Control sending Interval as needed, ensuring it is greater than 200ms.
- If using presets load/save function, set the interval to greater than 3s.
TCP/IP Connection
- Configure the product to use TCP client as the Transport protocol.
- Refer to the IP address information displayed on the LCD or check it in the software.
- Set the Network port to 8234.
- Adjust the Control sending interval to be greater than 200ms.
- If configuring for Presets function, ensure the interval is set to greater than 3s.
Frequently Asked Questions (FAQ)
- Q: How do I find the IP address information in the LCD display?
A: Navigate through the menu options on the LCD display to locate the network settings where the IP address is displayed. - Q: What should I do if the Control sending interval is less than recommended?
A: Adjust the settings in the control software to increase the interval to meet the specified requirements for proper operation.
Central control codes user manual
- RS232:
- Baudrate:115200 Bit/s
- Parity bits: None
- Data bits: 8
- Stop bits: 1
Control sending Interval >200ms (presets load/save function >3s)
TCP/IP connecting configuration
- Transport protocol: TCP client
- IP address: refer to IP address information in LCD display, or check it in Software
- Network port: 8234 Control sending interval: >200ms (when setting for Presets function >3s)
Regulation of control codes
Send instruction to device
QxA5 oxC3 ox3C Ox5A OxFF OXO? ox?? ox?? feedback code from device:
- OxOO: sending successful
- OXOI: sending failed
Read the status Of device
oxA5 oxC3 ox3C Ox5A OxFF QU? ox?? ox??
feedback code from device:
- 0xA5 0xC3 0x3С 0x5A: start code
- OxFF: device ID
- Ox0?: functions code 0x??: data length (byte-sized) of Ox?? … Ox?? Ox?? …
- Ox??: data (such as input/output, channel No., on/off, etc.)
- OxEE: end code Notice: hexadecimal data for sample, using without the prefix “Ox” , such as: A5 C3 3C 5A FF 36 00 ?? … ?? EE
Functions code
Decimal and hexadecimal digit table
Scene (presets) (0x02)
Scene (presets) recalling
Scene (presets) reading
Feedback code description:
A5 C3 3С 5A FF 63 02 01 03 EE means current preset No.3 Mute (0x03)
Mute (0x03)
Mute setting
Status of mute reading
Feedback code description:
- A5 C3 3C 5A FF 63 03 03 02 04 00 EE means Output 4 mute cancel
- A5 C3 3C 5A FF 63 03 03 02 04 01 EE means Output 4 mute
Volume and channels gain (0x04)
Device volume setting
Channels gain setting
Remark: 0.1dB in step when calculate
Example 1: if set volume in -60.0dB, -60.0/0.1=-600
Using excel to calculate low bit: =RIGHT(DEC2HEX(-600,2),2), final value A8
Using excel to calculate high bit: ==MID(DEC2HEX(-600,4),LEN(DEC2HEX(-600,4))-3,2), final value FD
Channel volume value reading
Feedback code description:
- A5 C3 3C 5A FF 63 04 04 00 00 AC FE EE means device main volume is -34.0dB
- A5 C3 3C 5A FF 63 04 04 02 04 EC FE EE means Output 4 volume is -2.0dB
+/-Gain in step (0x05)
Remark: 0.1dB in step when calculate
Example: if +/-1.0dB, 1.0/0.1=10
Using excel to calculate low bit: =DEC2HEX(10,2),2), final value 0A
Line/Mic level with sensitivity (0x06)
Mic level with the sensitivity setting
Sensitivity from 1 to 7 level: 5/10/15/20/25/30/35 dB
Line/Mic input reading
Feedback code description: A5 C3 3С 5A FF 63 06 03 02 00 05 EE means input channel 2 in Mic level with No.5 sensitivity (25dB)
Phantom +48V (0x07)
Input in Mic level with phantom +48V setting
Input in Mic level with phantom +48V reading
AFC feedback control setting (Ox08)
Input with AFC level setting
Input with AFC level reading
Feedback code description: A5 C3 3C 5A FF 63 08 02 02 01 EE means input channel 2 opened with AFC level 1
Matrix mixing (0x09)
Input – output channels matrix setting
Status of Input – output channels matrix reading
Feedback code description:
- A5 C3 3C 5A FF 63 09 03 04 04 01 EE means Input 4 – Output 4 connecting √
- A5 C3 3C 5A FF 63 09 03 04 04 00 EE means Input 4 – Output 4 disconnecting χ
Switch of analog/Dante/USB audio input (0x0D)
Analog/Dante/USB audio input setting
Status of analog/Dante/USB audio input reading
Feedback code description
- A5 C3 3C 5A FF 63 OD 02 04 04 EE means Input 4 is using Dante signal
- A5 C3 3C 5A FF 63 OD 02 06 00 EE means Input 6 is using analog signal
- A5 C3 3C 5A FF 63 OD 02 02 05 EE means Input 2 is using USB audio signal
Av. Saler n014 Poligono. Ind. L’Alterö. Silla 46460 VALENCIA-SPAIN
Tel: +34 961216301
www.equipson.es
Documents / Resources
![]() |
MARK MDX 0408 DSP Loudspeaker Processor [pdf] User Manual MDX 0408 DSP Loudspeaker Processor, MDX 0408, DSP Loudspeaker Processor, Loudspeaker Processor, Processor |