153546 2-Port DisplayPort KVM Switch
User Manual
For additional benefits
Scan to register your product warranty or visit:
register.manhattanproducts.com/r/153546
Setup
- Connect a keyboard and a mouse to the USB ports.
- Connect the display to the DisplayPort output
- (Optional) Connect a mic, a speaker, or both to the KVM outputs.
- Use the included combo cables to connect appropriate ports on your computers (DisplayPort, USB-A, mic, and speaker cables) to the KVM inputs (DisplayPort, USB-B, and combo audio cable).
- (Optional) Plug in a USB device to the USB hub port on the front of the KVM switch.
- Turn on your connected computers and equipment.
- This KVM switch is USB powered. If more power is needed, connect an appropriate power supply (9.0 V / 0.3 A) to the power input. 8 Switch between your computers via the buttons on the front of the KVM switch (a buzzer sounds to indicate success) or use the hotkeys described below.
• LEDS: Red = computer is online; Green = computer is selected
NOTE: If it is necessary to turn off the power to the switch, you must do the following before turning it back on:
- Unplug the data cables from all the computers connected to the switch.
- Unplug the power adapter cable from the switch if one is connected.
- Wait 10 seconds. If a power adapter is connected, plug the power adapter cable back into the switch.
- Connect the computer data cables and turn on the computers.
Hotkeys
Hotkeys let you use the keyboard to perform switch functions such as selecting a different computer, turning the buzzer on or off, and more. This switch provides four hotkey combination modes you can choose from:【CTL 】+ 【SHIFT】, 【SCROLL】+【SCROLL】,【NUM】+【NUM】and【CAPS】+【CAPS】. The following table shows hotkey combinations that use the primary hotkey inputs【CTL】+【SHIFT】 and how to switch to the other modes. If you switch to a new hotkey combination mode, the key combinations to complete a function are the same after you press the new primary inputs (for example, if you change the hotkey combination mode to【NUM】+【NUM】, 【NUM】+【NUM】+【B】 turns the buzzer on or off). The default hotkey combination to switch to the next online computer port in any mode is (left)【CTL】+【CTL】. Be sure to press the hotkey combinations quickly; each key times out after five seconds. For the complete list of commands, go to manhattanproducts.com.
【CTL】+【SHIFT】Mode
| Function | Hotkey Combination |
| Switch to the next online computer port | 【CTL 】+ 【CTL 】 |
| Select port by number | 【CTL 】+ 【SHIFT】+ 【1 】or 【2 】 |
| Next port | 【CTL 】+ 【SHIFT】+ 【➡ 】or 【⬇ 】 |
| Previous port | 【CTL 】+ 【SHIFT】+ 【⬅ 】or 【⬆ 】 |
| Enable/disable the buzzer | 【CTL 】+ 【SHIFT】+ 【B 】 |
| Enable/disable automatic switching mode, the default is 5 seconds, press 【ESC】 to exit | 【CTL 】+ 【SHIFT】+ 【S 】 |
| Adjust the auto-switch time, and press 【ESC】 to exit | 【CTL 】+ 【SHIFT】+ 【S 】+ 【N 】 |
| Switch to 【SCROLL】+ 【SCROLL】hotkey combination mode | 【CTL 】+ 【SHIFT】+ 【SCROLL 】 |
| Switch to 【NUM】+ 【NUM】hotkey combination mode | 【CTL 】+ 【SHIFT】+ 【NUM 】 |
| Switch to 【CAPS】+ 【CAPS】hotkey combination mode | 【CTL 】+ 【SHIFT】+ 【CAPS 】 |
Changing the Automatic Switching Interval
To change the number of seconds that pass before the KVM switch automatically switches to the next online computer, use the hotkey combination for this function shown above (【CTL 】+ 【SHIFT】+ 【S 】+ 【N 】). [N] represents the number keys 1 – 9, which refer to the number of seconds as shown in the chart below:
| N | Seconds |
| 1 | 5 |
| 2 | 10 |
| 3 | 15 |
| 4 | 20 |
| 5 | 25 |
| 6 | 30 |
| 7 | 35 |
| 8 | 40 |
| 9 | 60 |
For specifications, go to manhattanproducts.com. Register your product at register.manhattanproducts.com/r/153546 or scan the QR code on the cover.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
Disposal of Electric Equipment (applicable in the E.U. and other countries with separate collection systems:
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.
manhattanproducts.com
This device complies with the requirements of CE 2014/30/EU and/or 2014/35/EU. The Declaration of Conformity is available at:
support.manhattanproducts.com/barcode/153546
 | ||
| North & South America IC Intracom Americas 550 Commerce Blvd. Oldsmar, FL 34677, USA | Asia & Africa IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd. Xizhi Dist., New Taipei City 221, Taiwan | Europe IC Intracom Europe Löhbacher Str. 7, D-58553 Halver, Germany |
All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved. Manhattan is a trademark
of IC Intracom, registered in the U.S. and other countries.
Printed on recycled paper
Documents / Resources
 | Manhattan 153546 2-Port DisplayPort KVM Switch [pdf] User Manual 153546, 2-Port DisplayPort KVM Switch, 153546 2-Port DisplayPort KVM Switch, DisplayPort KVM Switch, KVM Switch, Switch |
 | manhattan 153546 2 Port DisplayPort KVM Switch [pdf] User Manual 153546 2 Port DisplayPort KVM Switch, 153546, 2 Port DisplayPort KVM Switch, DisplayPort KVM Switch, KVM Switch, Switch |
