MAKER FACTORY BN-2134130 RFID Read and Write Module Instructions

There are plenty of online tutorials available on the use of the MIFARE
RC522 module. For an open-source RFID, library go to: https://github.com/miguelbalboa/rfid

Pinout / Pin Map

Pin	Description
VCC	3.3 V Input voltage
RST	Reset and power down
GND	GND
MISO	Master-In-Slave-Out
MOSI	Master-Out-Slave-In
SCK	Serial Clock
NSS	Signal pin / Serial data
IRQ	Interrupt pin

Specifications

Operating voltage	3.3 V/DC
Current consumption	<30 mA (peak) 13 – 26 mA (operation) 10 – 13 mA (idle) <80 µA (sleep)
Transmission frequency	13.56 MHz
Data rate	10 Mbit/s
Transmission power (max.)	0.43- 0.86 mW
Transmission distance	0 – 35 mm
Operating temperature	-20 to +80 °C
Operation humidity	5 – 95 % RH
Storage temperature	-40 to +85 °C
Storage humidity	5 – 95 % RH
Dimensions (approx.)	40 x 60 mm
Weight (approx.)	20 g

Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive. Click on the following link to read
the full text of the EU declaration nonconformity: www.conrad.com/downloads Select a language by clicking on a flag symbol andenter the product order number in the search box. You can then download the EU declaration of conformity in PDF format.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.

Legal Notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems requires prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing. Copyright 2022 by Conrad Electronic SE.