SNOWDON
BLUETOOTH AUDIO SOUNDBAR
SNO-BAR-BLK-2
Instructions Guide
3 YEAR WARRANTY
Watch video tutorials and register your product for a FREE 3-year warranty at www.majorityradios.co.uk
Controls And Functions
Side View / Control Buttons
| 1. Switch on and off the unit 2. Select the modes 3. Volume up |
4. Volume down 5. Bluetooth pair button 6. Line in the socket |
Back View / Connections
| 7. AUX socket 8. OPTICAL IN socket |
9. DC IN (18V) socket |
Remote Control
| 11. Power On/Off Switch the unit between on and Standby mode 12. Bass increase/decrease Select to adjust the bass 13. Volume + Press to increase the volume 14. Back Step Use in Bluetooth mode to go back a track. 15. Play/Pause In Bluetooth mode, press to pause/ play media. 16. Volume – Press to decrease the volume 17. Treble increase/decrease Select to adjust the treble |
18. Media Modes: Music, Dialogue or Movie Press the relevant button for the media type for the best sound quality 19. FLAT Press the button to restore to default sound settings. 20. MUTE Press to mute and unmute sound. 21. INPUT Press repeatedly to switch between modes 22. Forward Step Use in Bluetooth mode to go forward a track. 23. PAIR In Bluetooth mode, press to pair with your device. Press again to disconnect. |
Using the Remote Control
The remote control sensor at the front of the soundbar is sensitive to the remote control’s commands up to a maximum of 6 meters away and within a maximum arc of 40 degrees.
Please note that the operating distance may vary depending on the brightness of the room.
What’s In The Box?
Box Contents
| A. Majority Snowdon Soundbar B. Remote Control C. Adapter |
D. 3.5mm to 3.5mm Audio cable E. RCA Stereo Audio Cable F. Instructions Guide |
Support
Support
Thank you for your purchase of the Majority Snowdon II.
Please follow the guidance of the manual to set up your soundbar and enjoy its fantastic features.
If you require further assistance with your new soundbar, please contact our support team on the Majority website: https://www.majority.co.uk/support
Instructions Guide
Fixing the Soundbar
Ensure the TV or Vision Device is placed properly.!
Mode Indicator Lights
| State | Indicator Lights |
| Power off | Red |
| Optical mode | Yellow |
| AUX mode | White |
| Line in mode | Green |
| Bluetooth ready | Flashing blue |
| Bluetooth connected | Blue |
Audio Settings
| Mode | Bass/Treble Functions |
| MUSIC | Manually change BASS and TRE settings between 0Db and +8Db. |
| DIALOG | BASS+ BASS- TRE+ TRE- functions disabled |
| MOVIE | BASS+ BASS- TRE+ TRE- functions disabled |
| FLAT | Restore to default settings + manually change BASS and TRE settings between -8Db and +8Db. |
Using the AUX Connection
Use the RCA Stereo Audio Cable to connect the TV’s stereo RCA(L/R) audio output socket to the AUX(L/R) Sockets of the unit.
Then press the INPUT button on the remote control (Ref.21) or press the Source button on the soundbar (Ref.2) to choose the AUX function.
Turn on your television set to use the Majority Snowdon II.
Troubleshooting: If you are not receiving a picture or encountering interference, please ensure that the RCA cable is being connected to ‘output’ RCA ports on your TV set. This will ensure that the sound is being exported correctly. If your TV does not have ‘output’ RCA ports, please use an alternative connection method.
Using the Optical Input
You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (not included)
Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the speaker bar.
Press the POWER button on the side panel (Ref.1) or the POWER button directly on the remote control (Ref.11) to switch on the unit.
Press the INPUT button on the remote control repeatedly (Ref.21) to switch to Optical mode or press the SOURCE button (Ref.2) repeatedly on the soundbar to select the Optical mode.
The mode indicator LED will turn Yellow.
Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On. Audio from the connected audio source will now be played through the speakers.
Using the MP3 LINK Connection (Line In)
Plug one end of a 3.5mm audio input cable (included) into the Line in (Ref.6) on the unit. Before use, disconnect any cables connected to the Stereo RCA Inputs. Plug the other end of the cable into the audio output/ headphone output on an MP3 player or another audio source. Press the POWER button on side panel (Ref.1) or the POWER button directly on the remote control (Ref.11) to switch on the unit.
Press the SOURCE button repeatedly on the soundbar (Ref.2) or press the INPUT button on the remote control (Ref.21) repeatedly until on LINE in mode. The mode indicator will turn green.
Audio played through the connected device will now be heard through the speakers. 
Connecting to the Mains Supply
Ensure that the power supply voltage is in the voltage of 100V~240V.
This unit is designed to use an adapter.
Connecting the unit to any other power source may cause damage to the unit.
Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket.
The mains plug/appliance coupler is used as the disconnect device, the disconnect device must remain readily operable.
Connect the Adapter into the soundbar AC Socket (Ref.3)
Ensure all audio connections of the unit are connected before connecting to the mains power socket.
Unplug the power cord from the outlet when the unit is used for an extended period of time.
Bluetooth Operation
Pairing a Bluetooth Device for the First Time
Press the POWER button on the soundbar (Ref.1) or the POWER button on the remote control (Ref.11) to switch on the unit.
Press the INPUT button repeatedly on the remote control (Ref.21) or press the SOURCE button on the soundbar (Ref.2) repeatedly until in Bluetooth mode, indicated by a flashing blue light.
Using the native controls on your Bluetooth device, select the “Majority Snowdon II” in your Bluetooth settings to pair.
If your device requests a password, enter the default “0000”.
Refer to the “user manual” for your specific device for instructions on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will display a solid blue light.
After the initial pairing, the unit will stay paired unless unpaired manually by the user, or until it is erased due to a reset of the device.
If your device should become unpaired or you find it is unable to connect, repeat the above steps.
Playing Audio Wirelessly
Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to select a track.
To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device.
Audio played through the connected Bluetooth device will now be heard through the speakers.
Troubleshooting
If the Soundbar does not work properly as desired, please check the following checklist.
| Malfunction | Possible causes/measures |
| No power/function | Check whether the power is switched on or off at the wall. Check whether the power adaptor is properly connected to a power outlet or not. |
| No sound | Check whether unit is set to MUTE or not. Check whether MODE is correctly selected or not. Check whether cables are properly installed or not. |
| No sound from Bluetooth connection | Check whether you have pressed PAIR button before pairing. Check whether the external device requires the password “0000” to start with. |
| Function disturbance | Switch off and unplug the unit. Leave for 2 minutes and switch it on again. If a particular mode is causing problems, please try an alternative connection to your TV such as Optical, AUX or Bluetooth. |
| The remote control does not work [properly] | Check whether the battery has run out or not. Replaces a new one if necessary. Check whether there is an obstacle on the front of the remote sensor or not. |
| No sound when connection and switches to OPTICAL IN mode | Check and ensure the audio setting of the input source (e.g.TV,game console, DVD player, etc.)is set to PCM mode while using the digital connection (such as Optical, HDMI and COAXIAL) |
Specifications
| Power Supply | DC 18V 1.5A |
| Frequency Response | 30Hz-20KHz |
| SNR | 70dB |
| Separation | 45dB |
| Bluetooth | V5.0 |
| Dimension (WxHxD) | 81 x 8.3 x 8.3cm |
| Net Weight | 1.5kg |
Warranty
All products come with a standard 12-month warranty. All items must be registered on www.majority.co.uk for the warranty to be valid. Once on the web page, use the menu to find “Register Your Product”. You will also be given the chance to extend your warranty for an additional 24 months, free of charge.
Safety Information
- Read these instructions.
- Keep these instructions. Instructions are also available for download at www.majority.co.uk
- Heed all Warnings
- Follow all instructions
- Do not clean the apparatus near or with water
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during light storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped. - No naked flame sources, such as lit candles, should be placed on the apparatus.
- Dispose of used electrical products and batteries safely according to your local authority and regulations.
ADDITIONAL WARNINGS
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
RECYCLING ELECTRICAL PRODUCTS
You should now recycle your waste electrical goods and in doing so help the environment.
This symbol means an electrical product should not be disposed of with normal household waste.
Please ensure it is taken to a suitable facility for disposal when finished with.
IMPORTANT: Please read all instructions carefully before use and keep for future reference.
Risk of electric shock.
Do not open
Read all instructions carefully before use and keep for future reference
When servicing, use only identical replacement parts
IMPORTANT: Please read all instructions carefully before use and keep them for future reference.
Documents / Resources
 |
MAJORITY SNOWDON - Bluetooth Audio Soundbar SNO-BAR-BLK-2 [pdf] Instruction Manual MAJORITY, SNOWDON, Bluetooth, Audio, Soundbar, SNO-BAR-BLK-2 |
