Majority DX10 Computer Speakers
USER MANUAL
Controls and Functions
- AUX/Headphone Port
- On/Off | Volume Dial
- AUX Cable
- USB Cable
- Speaker Connector Cable
- Read these instructions:
- Heed all warnings.
- Follow all instructions in the user manual.
- Do no clean the apparatus near or with water.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during light storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
- No naked flame sources, such as lit candles, should be placed on the apparatus.
- Dispose of used electrical products and batteries safely according to your local authority and regulations.
Addition Warnings
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main power completely, the power plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Majority DX10 Speakers – Frequently Asked Questions
Here are some answers to frequently asked questions about the Majority DX10 Speakers:
How powerful are the speakers?
The Majority DX10 speakers have a total output of 10 watts.
What type of audio connection do the speakers have?
The speakers receive audio over a 3.5mm AUX audio cable.
Can I plug the speakers into a headphone socket?
The speakers receive audio over a 3.5mm AUX audio cable. Therefore, if you have a device with a 3.5mm headphone audio output jack/socket, then you can plug the 3.5mm AUX audio cable into that.
How far apart can the two speakers be from each other?
The two separate speakers are connected with a speaker connector cable. The speaker connector cable is 118 cm long.
Will these speakers work with my TV?
The speakers receive audio over a 3.5mm AUX audio cable. If your TV set has a 3.5mm AUX audio output, then this should work fine. However, these speakers have been designed for use with a PC. If you want to enhance the audio of your TV, then you may want to consider one of the Majority soundbars.