MAJORITY 2024 Internet Radio Music System User Manual

- Volume knob / OK / SCAN button: Adjust volume, confirm entry, or scan on FM mode
- ON / Standby / MODE button: Rotate for volume adjustment, press to OK, switch modes
- UP / TUNING UP button: Move up or right in FM mode

Remote Control Usage:

To operate the remote control, follow these steps:

1. Open the battery compartment and insert two AAA batteries.
2. Power on/off the device, set alarms, change modes, select tracks, adjust volume, and more using the remote control buttons.

Getting Started – Product Set-Up:

Follow these steps to set up your Bard Internet Radio Music System:

1. Remove all packaging and prepare the radio for use.
2. Insert the power adaptor into the device’s port and plug the other end into a power socket.

FAQ

Q: How do I set an alarm on the Bard Music System?

A: Press the ALARM / BACK button on the device or use the remote to set Alarm1 or Alarm2.

Box Contents

What’s in the Box?

A. Bard Music System
B. Power adaptor

C. Remote control
D. 3.5mm audio cable
E. User manual

Controls & Functions

Bard Radio – Front View

2.4” screen – Colour TFT display
Remote Control sensor – Receive remote control signal
UP / TUNING UP button
DOWN / TUNING DOWN button –
Move up or right; FM: Set frequency
Move down or left / FM: Set frequency
FAV button – Select favorite stations; Press and hold to BT discoverable under BT mode
Volume knob / OK / SCAN button
ON / Standby / MODE button – Rotate to adjust volume; Press to OK; Press to scan on FM mode. Switch on/Standby or change mode.
MENU / INFO button – Enter the menu; View the information of the station or track
ALARM / BACK button – Set alarm clock; Return one step under the menu
Bard Radio – Back View
DAB+/FM antenna – Antenna for enhancing DAB/FM reception
ON/OFF switch – Switch on/off the device

DC IN – Plug for power support
USB port – USB drive music playback
Headphone jack – 3.5mm headphone output

AUX jack – 3.5mm audio input

Remote Control

Operating your remote control Press and slide the back cover to open the battery compartment of the remote control. Insert two AAA-size batteries. Make sure the (+) and (-) ends of the batteries match the (+) and (-) ends indicated in the battery compartment. Close the battery compartment cover.

Device power on/off; alarm off
MODE – Open, close, change the radio Mode in between FM, DAB,BT,USB, AUX, Spotify, Internet Radio & Podcasts
MENU – Press to open, close menu

Select previous track, hold down to seek
Start playback, pause
EQ – Select equalizer preset

Move up; FM: Set frequency
Move left, step back
OK SCAN – Confirm entry, FM: Scan; Playing: album in full screen

Move right, step next
Move down; FM: Set frequency
Zzz – Sleep setting

SHUFFLE REPEAT – Music: random and repeat selection
ALARM – Set Alarm1, Alarm2
BT PAIR – Press and hold to BT discoverable under BT mode

Select next track, hold down to seek
Increase volume
Decrease volume

Mute, Unmute
1-10/0 – Number buttons: retrieve saved favorite station, hold down to save station
INFO – Display FM mode info (Name, PTY, RT, frequency) Display DAB mode info (Station, track, artist etc.)

FAV – Select your favourite stations, and hold down to save your favorite

Getting Started – Product Set-Up

*Please note that the instructions within this manual will refer to the remote button number e.g. (Rem*number*) or radio buttons e.g. (Ref* number*) in accordance with the diagrams on pages 4-6.

Connection and Preparation

Remove all packaging and prepare your Majority Bard radio for use. Insert the power adaptor to the back of the device into its port (Ref.12) and plug the other end into the power socket.

Connecting the network

A broadband connection in combination with a wireless access point, router, or similar network device.
The network device needs to support Wi-Fi (802.11 a/b/g/n) wireless connection.
Make sure your wireless network is set and you have the WEP, WPA or WPA2 security password to activate the connection with Majority Bard radio. You may also use the WPS (Wi-Fi Protected Setup) function for easy pairing between the network device and the radio. Check if the light indicators on the network device are inappropriate status.

Antenna

Plug the antenna into the F-connector port (Ref.10) at the back of the radio. To get good reception for DAB/FM broadcasting, always extend the antenna to its full length.

First Time Setup

When powering the device on for the first time, you will be appointed to change the language. Rotate the knob to select the menu language you want from the list and press the OK button (Rem.9), to confirm your selection. Right after the privacy policy will be displayed. Press OK button to continue (Rem.9). A setup wizard guide will be automatically launched to guide you through the process. Select ‘YES’ and confirm and launch the setup wizard. If you select ‘NO’, the next window will ask you to choose if you want to start the setup wizard again the next time you power the device on.

Setting date and time

Select the clock format such as: ’12’ for the 12-hour display format or ’24’ for the 24-hour display format. If you select the 12-hour format, the display shows ‘AM’ in the morning or ‘PM’ in the afternoon after the time.
Note: ‘AM’/ ‘PM’ displays only if you have chosen the 12-hour time format. Select ‘AM’ for the morning hours or ‘PM’ for the afternoon hours.

Once selected, the following options will be displayed on the radio screen to choose from for the time and date to be updated such as Update from DAB, Update from FM,
Update from Network or No update.
Note: If you choose ‘Update from Network’ you must indicate your time zone in the next window.
Next choose daylight saving to ‘ON’ for summertime, otherwise select ‘OFF.’ If you choose ‘No update,’ you will have to enter the date and time manually.

Connecting to Network

Connecting Majority Bard with your network

Firstly, the device asks to keep the network connected. To control the device in all operating modes via the app, select ‘YES’ to confirm. If choosing ‘NO,’ while in Standby Mode it is not possible to control the device from the app you can only do so in AUX IN, FM, DAB operating modes.
Note: The power consumption in Standby Mode will be higher when the network connection is On. Once you confirm your selection, a list of WIFI networks found available at your location will then be displayed on the radio screen. Select from the list your network to connect Majority Bard radio with it using one of the following methods:

Push button: The radio prompts you to press the connect button on your internet router. Once activated, Bard radio scans for a ready Push Button network available and connects.

Pin button: The radio generates an 8-digit code number which you enter into your wireless router, access point, or an external registrar.
Skip WPS: Enter key as for a standard encrypted network. To enter the network key, use the dial knob (Ref.6) or the direction buttons on the remote control to move the cursor through the characters and press OK to confirm. As each character is selected, the key is built up near the top of the display. There are three options accessible by tuning the navigate dial knob (Ref.6) back before the first characters – Backspace, OK and Cancel.

Note: For more information on setting up a WPS encrypted network, see your WPS router’s instructions.

Once the key has been entered Bard radio will search and connect to your network. Bard radio will on its screen the status connected if the set-up has been successfully completed. If connecting with your network using this method fails, it returns to the previous screen to try again. Once completed, press OK to quit the setup wizard

Presets

Storing & Recalling Presets

Presets are stored on the radio and cannot be accessed from other devices.

The number of presets for each mode are DAB- 40; FM- 40, Spotify- 10 and 40 in total for the internet radios and podcasts all together.
While playing a radio station/podcast to store as a preset, press and hold the FAV button for 2-3 seconds (Rem.22). The display shows the ‘Store preset screen.’ Using the arrow buttons find an empty preset space, select one and confirm. The radio display will show stored.
To recall a preset, press FAV button on the remote (Rem.22). Using the arrow buttons, search for the one you wish to play from your list and confirm. The radio will then start playing.

When a preset station is playing, it shows a star icon (1, 2, etc.) at the bottom of the screen.
For 1-9 preset stations, you can use shortcut buttons on the remote control keypad.
Press and hold for 2-3 seconds a number button on the remote keypad, between 1-9, to store a radio station. Alternatively, press FAV button to select the corresponding number of presets.

To save a preset from 10 onwards, you can only store or recall via the ‘Presets list’.

Using Undok App – Net remote

UNDOK

The Majority of Bard radio has a feature of network remote for smartphones or tablet with IOS or Android operational system. Having this feature will allow you to control the radio using the network remote on your device. To be able to activate and use this Net-remote, you must download on your phone/tablet the UNDOK app from Google Play or Apple Store then install it on your device or scan any of these codes for quick download.

Before using the UNDOK app, make sure that Bard radio and your phone or tablet are connected to the same WIFI network. Launch the app. The app initializes and scans for Internet Radio in the network, find Majority Brad radio and select the radio to connect with. When prompted, enter the current PIN code. The default PIN is ‘1234’. You can view and edit the current PIN on the Internet Radio menu. Select your desired mode on the main page. Once connected you can control the selected mode on your smartphone/tablet and on the display of the device simultaneously. Tap the ‘Standby’ icon to go to standby mode. Tap ‘Wake up’ to go to operation mode. Tap ‘Browse’ to view the details. Tap to view the saved preset stations, and tap ‘+’ to add the playing station to the desired preset station number.
NOTE: Be aware that if another smartphone/tablet with the app in the same network have access with the device, the original connection will be cut off.

Internet Radio & Podcasts

Internet Radio & Podcasts

Majority Bard can play thousands of internet radio stations and podcasts from around the world through a broadband Internet connection. When you select Internet radio or Podcasts mode, the device directly contacts the Frontier Smart Technologies portal to get radio stations or podcasts

The list menu is provided by the portal and is only accessible when the device is connected to the Internet Network. Please note: The contents and sub-menus may change from time to time. Choose the required category and search for the radio station or podcast you would like to play on your Bard radio.

Now playing information

While the stream is playing, the screen shows its name and description. To view further information, press ‘INFO’. Each time you press ‘INFO’, another set of information will be displayed, cycle through name/description, genre/location, reliability, codec/sampling rate, playback buffer and today’s date.

Press OK to view the station album in full screen.
Presets – 40 presets available,

Spotify Connect

Spotify Connect

Use your smartphone, tablet, or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-partylicenses Start playing Spotify on your smartphone as per usual. The ‘devices icons’ are displayed on your phone bottom page. Open the devices icon list to see the ones available on your network, then select ‘Majority Bard.’ Once successfully connected the radio icon will turn green and you can start playback via Bard radio. While playing you can Play / Pause (Rem.5) or use the Previous or Next track to skip (Rem 4. and Rem.17), which you can press and hold for a few seconds to fast forward or rewind.

USB Playback

USB Music Player

This feature is only to be used to play audio files from a USB stick. Insert the USB stick on its port on the back of the radio (Ref.13).

The USB stick specifications that you can use with Bard radio are:

Supported USB file systems: FAT16, FAT32 -Maximum device capacity: 128 GB.

Maximum number of items (files/sub-directories) including any directory is: 5000.
Maximum depth of file system tree: 8 directory levels. While in USB mode the menus are generated based on the content of the USB stick (folders, audio files). Browse through the files using the navigation knob (Ref.6) and BACK button (Ref.9), or the arrow buttons on the remote control.

The radio display shows folders and file names (not necessarily track names). Once you have found a track you want to play, press OK. A short press plays the track immediately.
In USB mode you can use the Previous (Rem.4) or Next track (Rem.16), to skip to the next or previous track. Press and hold for few seconds the Previous or Next buttons to fast forward or fast rewind. Use PLAY/Pause button (Rem.5).

My playlist – The files/ audio tracks can be added to My playlist by browsing your available tracks through the USB playback menu. Highlight the track you wish to add, then press, and hold for 2 seconds the OK button to save. The playlist is preserved during standby mode. The device holds a queue of up to 200 tracks in My playlist.
Clear My playlist – To clear the entire ‘My playlist.’
Repeat/shuffle – You can set these options to repeat tracks or play them in random order. To activate Repeat/ Shuffle press the corresponding button on remote control (Rem.13).

Now playing information – While a track is playing, the screen shows the file and artist. There is also a progress bar with figures for elapsed and total track time. At the bottom of the screen, an icon indicates USB depending on the source.

USB Playback

To view further information, press INFO. Each time you press INFO, another set of information will be displayed, cycling through the information: artist, album, codec/sampling rate, playback buffer and today’s date. Note: In USB mode the album cover is not supported

DAB Radio

DAB Radio

DAB mode receives DAB/DAB+ digital radio and displays information about the station, stream and track playing

Scanning for stations

The first time you select DAB radio mode, or if the station list is empty, the radio automatically performs a full scan for the available radio stations. To start a scan manually, choose ‘Full scan.’ To scan only stations with good signal strength, select ‘Local’ scan. Once the scan is complete, the radio shows a list of available stations. To remove stations that are listed but not available, choose Prune invalid. Rotate the navigation dial (Ref.6) to scroll through the list of DAB radio stations found, highlight the one you would like to play then press OK to confirm. Once selected, the radio station starts to play. While playing on the radio screen will be displayed, information about the radio station, audio track or broadcast info.

Now playing information

To view more info while streaming press INFO (Rem.21). Each time you press the INFO button, another set of information will display, cycling through DLS text, program type, ensemble name/frequency, signal strength/error rate, bite rate/codec/channels and today’s date.
Press OK to view the station album in full screen.

DAB Radio

DAB mode settings

Dynamic range compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may wish to compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter. You can change DRC as Off, Low or High.

Station order

You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists valid stations first, alphanumerically, then off-air stations.

FM Radio

FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information about the station and broadcast if available. To find a station, press OK. The frequency display starts to run up as the device scans the FM band. Alternatively, you can tune manually by turning the NAVIGATE knob.

Now playing information

While the stream is playing, the screen shows its frequency. If RDS information is available such as station name, programme name, track title and contact details these will also be visible. If there is no information available, on the radio display you will only see the radio station frequency. Stereo broadcasts are indicated with an icon at the top of the screen, to view further information about the broadcast, press INFO button (Rem.21). Each time you press INFO button, another set of information is displayed, cycling through RDS text, further RDS text (station/programme type), frequency and today’s date.

FM Settings Scan settings

By default, FM scans stop at any available station. This may result in a poor signal-tonoise ratio (hiss) from weak stations. To stop at radio stations with good signal strength only change the scan settings to ‘Strong station only,’ select ‘Yes’ to confirm.

Audio settings

All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: ‘Listen in mono only’ and then YES to confirm.

Bluetooth & AUX In Mode

Bluetooth Mode

The Majority Bard can be paired via Bluetooth with a phone, a tablet or similar device to play audio from, via the radio speaker. In Bluetooth mode, the radio enters the pairing mode automatically.

You can turn on Bluetooth on your device and search the radio Majority Bard. When it is waiting for pairing, there is a blinking Bluetooth icon at the bottom. If the pairing is successful, the Bluetooth icon becomes steady. Control the music playback from your Bluetooth device. To disconnect from the radio, press, and hold PRESET/BT PAIR (Rem.15) or go to the menu and choose BT to disconnect. Please note: The Majority Bard radio is not compatible with Bluetooth earphones.

Aux in

The Aux-in mode can be used to play audio from an external source such as an MP3 player, a phone, a tablet, or any other similar device via the Majority Bard speaker. Connect the external audio source to the Aux in stereo jack port on the back of the Bard radio (Ref.15), using the 3.5 mm audio cable. Adjust the volume level on the radio and on the audio source device that you are connecting with, if necessary.

Dual Alarm & Sleep timer

Sleep Timer

To set the sleep timer, select Sleep under the Main menu or press the SLEEP button (Rem.12) on the remote control. Choose from Sleep OFF, 15, 30, 45, 60, 90 or 120 minutes. The radio will count and turn off after you select a sleep time.

Alarm

There are two versatile wake-up alarms with a snooze facility and a sleep function to turn the system off after a set period of time. Each alarm can be set to start in a particular mode. Select Alarms under the Main menu to set or change an alarm.

Select the alarm number (1 or 2) then configure the following parameters

Enable: on/off,
Frequency: Daily, Once, Weekends or Weekdays,
Time: as per your choice
Mode: Buzzer tone, Internet Radio, DAB or FM,
Preset: Last listened or Preset 1-40
Volume: set the volume level.

To activate the new settings, scroll down and select Save. The screen shows active alarms with an icon at the bottom left of the radio display screen. At the set time, the alarm will sound.

To temporarily silence, press any buttons except STANDBY. You can change the snooze period. The radio returns to standby for the set period, with the silenced alarm icon flashing. Press STANDBY to turn off the alarm.

System Settings

System Settings

On the playing screen of any modes, press and hold MENU / INFO button (Ref.7) on the unit or press MENU on the remote control (Rem.3), choose System settings to continue.

Equaliser

Several preset EQ modes are available: Normal, Flat, Jazz, Rock, Movie, Classic, Pop and News. Also, a user-defined setting is available; create your own EQ with custom bass, treble settings.

Network

Network wizard – Enter to search AP SSID, then input the WEP / WPA key or choose
Push Button/Pin/Skip WPS to connect to the wireless network.
PBC WLAN setup – Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected Setup).
View settings – View the information of current connected network: Active connection, MAC address, WLAN region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS, and Secondary DNS.
Manual settings – Choose wireless network connection and enable or disable DHCP (Dynamic Host Configuration Protocol).
NetRemote PIN Setup – Here you can view and edit the NetRemote PIN. The default
NetRemote PIN is: 1234. The NetRemote PIN is required when you want to connect a smartphone or Tablet PC to your radio.
Network profile – The smart radio remembers the last four wireless networks it has connected to, and automatically tries to connect to whichever one of them it can find.
From here you can see the list of registered networks. You can delete unwanted networks by pressing the OK button and then choosing ‘YES’ to confirm delete.
Clear network settings – Select ‘YES’ to clear all the current network settings. Select ‘NO’ to cancel.
Keep network connected – If you choose to keep network connected the Wi-Fi will not disconnect even in standby mode. This option allows the device to be ready for UNDOK (Details can be found on Section 3) connection in any operating modes.

Time/Date

Set the time manually or auto update, time format, time zone and daylight. Details can be referred to Setting date and time under Section 3 (First Time Setup).

Language

The default language is English. Change it as your preference. There are 13 languages available – English, Dansk, Deutsch, Español, Français, Italiano, Nederlands, Norsk, Polski, Português, Suomi, Svenska, Türkçe.

Factory Reset

A factory reset will set all user settings to default values, therefore the existing presets, time and date, network configuration will be lost.

Software Update

Auto-check setting – This option automatically checks for latest updates from time to time. Automatic updating is enabled by default. To disable it, select ‘NO.’ To enable it again, select ‘YES.’
Check now – Search for available updates immediately. \If newer available software is detected, you will be asked if you want to go ahead with an update. If you agree, the new software is then downloaded and installed. After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that the radio is plugged into a stable main power connection. Disconnecting power during an upgrade may permanently damage the unit.

Setup Wizard

With this function, you can start the setup wizard at any time. Any parameters or stations entered already are not deleted. For more information, please read Section 3 (First-time setup).

Info

Enter Info to view the firmware version and the radio ID.

Privacy Policy

View the information of Privacy Policy. Please read the data protection regulations listed there or go to this website: www.frontiersmart.com/privacy

Backlight

You may change the backlight of each environment (power on or standby) to High, Medium, or Low. And adjust the timeout duration which the radio turns to standby backlight level when it has not been controlled.

Troubleshooting

Error	Potential Cause/Solution
The device does not switch on or turn off suddenly.	1. Check if the power adaptor is connected properly. 2. The device may malfunction when used in areas with strong radio interference. The device will work properly again once there is no more interference.
No Power	Ensure that the power adaptor plug of the unit is connected properly.
No Sound or lower sound	1. Tune on the sound as it may be muted. 2. Increase the volume.
No network connection can be established.	1. Check the WLAN function. 2. Try to set an IP address on the device. 3. Activate the DHCP function on the router and make the connection again at the device. 4. A firewall is activated on the network – set the respective program in such a way that access is possible. 5. Reboot the router.
Wi-Fi connection cannot be established.	1. Check the availability of WLAN network on the router. 2. Place the device closer to the router. 3. Make sure the password is correct.

Error

Potential Cause/Solution

No station is found.

1. Check the network as well as the access point and firewall.

2. The station may not be available currently, try again later.

3. The link of the station is changed, or the station no longer transmits

– ask the provider for information.

4. The link of manual added station may not be correct, check, and change it.

No signal or hiss in DAB/FM mode.

1. Check the antenna installation properly/move the antenna. Also try to adjust the length of antenna.

2. Move the radio to another location.

USB driver or MP3 player is not detected.

1. Check if the USB driver or MP3 player is plugged in properly.

2. Some USB hard disks need external power supply, make sure it is connected to the power.

3. Not all MP3 players can be read directly on the device – use a USB drive instead.

Alarm does not work.

1. Switch on the alarm.

2. Due to the volume setting, refer to the solutions of ‘No sound.’

3. The source of alarm was set to be station but there is no network connection. Change the source of alarm or reconfigure the connection.

Error

Potential Cause/Solution

All other undetermined cases. / Electro-Magnetic Interference.

The smart radio may process large amount of data after a period of operation, no matter in which mode, it will cause the system to freeze or malfunction.

Reboot the device if necessary.

The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.

The device may malfunction when used in areas with strong radio interference. The device will work properly again once there is no more interference.

Product Specification

Model number	Majority Bard
Description	Internet Radio Music System
Speaker output power	100W
Display	2.4″, 320 x 240, colour TFT display
FM	87.5 – 108.0 MHz, RDS supported
DAB/DAB+	174 – 240 MHz (Band III)
Power adaptor	15.0V 2.4A 36.0W
Connections	AUX in (3.5mm socket) Headphone (3.5mm socket) USB (type A) – for playback only, no charging function DC IN power supply (5.5mm socket)
Network standby power	<2.0W
Max. power consumption	36.0W
Operating temperature	0 oC – 35 oC
Dimensions	235mm(L) x 129mm(H) x 135mm(D)
Weight	2.1 kg

Power Adaptor
Input voltage	100 – 240V ~ AC, 50/60Hz, 1.2A
Output voltage	DC 15.0V
Output current	2.4 A
Output power	36.0 W
Average active efficiency	89.73%
Efficiency at low load (10%)	88.95%
No-load power consumption	0.07W

Warranty & Support

Warranty

Register your product within 30 days of purchase at www.majority.co.uk to activate your extended warranty. Terms and conditions apply.

Support

If you require further assistance with your new Majority Bard radio, please contact our support team on the Majority website: www.majority.co.uk/support

Warning & Safety Information

Safety and Usage Guidelines (All where applicable)

General Safety Information – Read and Retain: Review all safety and operating instructions before use; keep them for future reference. Follow Instructions: Adhere strictly to all safety and operational guidelines. Water Exposure: Keep the device away from water; avoid placing liquids near it. Ventilation: Ensure ventilation openings are unobstructed to prevent overheating. Heat Sources: Keep the device away from heat-emitting appliances. Wall Mounting – Installation Safety: Follow the manufacturer’s instructions and use approved mounting kits only. Avoid drilling into areas with cables, gas, or water lines. Use proper tools and safety apparatus. Regular Maintenance: Inspect regularly for wear or damage, especially if wall-mounted. Relocation: Detach from the wall mount before moving. Child Safety: Keep out of children’s reach and ensure heavy items are securely mounted. Seismic Precautions: Use specialized mounts in earthquake-prone areas. Electrical Safety – Power Source: Use the specified power source; consult an electrician if unsure. Cable Management: Protect the power cord from damage. Power Disconnection: Keep the main plug accessible; unplug during storms or long periods of non-use. Battery Safety – Charging: Use the manufacturer’s charger; avoid extreme conditions. Heat Exposure: Keep batteries away from heat to prevent explosion or leakage. Battery Condition: Discontinue use if the battery is damaged; dispose of it properly. Replacement: Only use recommended batteries; incorrect types can cause hazards. External Batteries: Use only specified types, observing correct polarity. Battery Removal: Remove batteries if not used for an extended period. Disposal: Follow local regulations for battery disposal; do not incinerate. Connectivity Safety – Cable Connections: Power off devices before connecting or disconnecting cables. Bluetooth Pairing: Ensure a secure connection; avoid interference from other devices. Volume Control: Keep volume moderate to prevent hearing damage. Connectivity and Data Security – Wireless Security: Review privacy policies and secure your network. Software Updates: Keep software updated for security and performance. Children’s Safety Warnings – Product Use: Intended for adults; keep away from children. Battery Warning: Keep batteries and items containing batteries out of children’s reach. Volume Control: Maintain a safe volume level to protect children’s hearing. Fire Hazard – Flammable Materials: Do not place open flames near the product. Overheating: Avoid covering the product to prevent overheating and fire risks. Disposal and Recycling – Product Disposal: Dispose of at a recycling centre according to local laws. Environmental Compliance: Follow regulations for battery and electronic waste disposal. User Maintenance – Cleaning: Unplug before cleaning; use a dry cloth only. Servicing: Only qualified personnel should perform repairs. Data Protection: Reset to factory settings before returning or disposing of the product. Disclaimer: Failure to follow these instructions may result in injury, death, or property damage. The manufacturer is not liable for damage caused by improper use.

Declaration of Conformity:

We, Izilla Ltd, Newton House, 2 Pioneer Court, Histon, Cambridge, CB24 9PT declare under our sole responsibility that the product:
Product Name: Bard Internet Radio
Model: Black- 1000002835/1000002836 White- 1000002900/1000002901
Brand Name: Majority

To which this declaration referred is in conformity to the following harmonized standards or normative documents (CE & Rohs 2.0) ;

EN 55035:2017, EN 55032:2015, EN61000-3-2:2014, EN61000-3-3:2013, EEN62368- 1:2004+A11:2017, ETSI EN 301 489-1 V2.2.3(2019-11), ETSI EN 301 489-17, V3.2.2(2019-12), ETSI EN 300 328 V2.2.2 (2019-07), EN 62479: 2010, IEC 62321-3- 1:2013, IEC 62321-4:2013, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-8:2017, (EC)NO 1275/2008,EN50564:2011, (EC)NO 801/2013.

Complying with the requirements or provisions of Council Directives which relate to:

EMC Directive 2014/30/EU, RED Directive 2014/53/EU, LVD Directive 2014/35/EU, Directive (2011/65/EU) and its amendment directives 2015/863/EU (RoHS 2.0) of the, European parliament, ERP Directive 2009/125/EC. All essential test suites have been carried out. Point of Contact: Eddie Latham | Founder
Signed:Date of Issue: January 2024 Place of Issue: Cambridge, UK

Importer’s Addresses:

UK: iZilla Ltd, Newton House, 2 Pioneer Court, Histon, Cambridge, CB24 9PT
Email: techsupport@majority.co.uk
EU RP: AR Experts, Po Box 5047, 3620 AA Breukelen, The Netherlands
Email: info@ar-experts.eu
US: iZilla Ltd C/O A.N.Deringer Inc, 19520 Wilmington Ave, Rancho
Dominguez, CA, 90220
Email: techsupport@majority.co.uk

IMPORTANT: Please read all instructions carefully before use and keep for future reference

www.majority.co.uk

Documents / Resources

MAJORITY 2024 Internet Radio Music System [pdf] User Manual
2024 Internet Radio Music System, 2024, Internet Radio Music System, Radio Music System, Music System, System

References

User Manual

MAJORITY 2024 Internet Radio Music System

Product Usage Instructions

FAQ

Box Contents

Controls & Functions

Getting Started – Product Set-Up

Connecting to Network

Presets

Using Undok App – Net remote

Internet Radio & Podcasts

Spotify Connect

USB Playback

USB Playback

DAB Radio

Bluetooth & AUX In Mode

System Settings

Troubleshooting

Product Specification

Warranty & Support

Documents / Resources

References

Leave a comment

Cancel reply