MAJESTIC-logo

MAJESTIC GLOW Wireless Speaker With TWS

MAJESTIC-GLOW-Wireless-Speaker-With-TWS-product

Safety Warnings

For safe use and maximum performance, please read this manual carefully before use. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE THIS APPARATUS. THERE ARE NO USER SERVICEABLE PARTS. FOR REPAIRS, CONTACT QUALIFIED TECHNICAL PERSONNEL. To prevent electric shock or fire hazard, do not expose to rain or moisture.

CAUTION: DANGEROUS VOLTAGE!

MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-2The symbol opposite warns the user of the presence of uninsulated voltage which could cause electric shock.
MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-3This symbol warns that before using the unit it is necessary to carefully read the instruction booklet.

IMPORTANT NOTES

  • Use must be permitted only to adults and responsible persons, adequately trained on damages deriving from incorrect use.
  • Keep the appliance and its cord out of the reach of children.
  • The appliances can be used by people with reduced physical, sensory or mental capabilities or with lack of experience and knowledge if they are supervised or if they have received instructions regarding the safe use of the appliance and understand the dangers involved.
  • Children must not use the appliance as a toy.
  • Do not allow the appliance to be used by children or disabled people without supervision.
  • Keep away from pets.
  • Never use the appliance in places where the cable, plug and the product itself can come into contact with water or wet surfaces. Do not use the appliance outdoors, as rain could create short circuits. Do not touch the appliance with wet hands.
  • Avoid installing the unit in the locations listed below:
    • Places exposed to direct sunlight or near heat-generating equipment, such as radiators;
    • On top of other appliances that may radiate excessive heat;
    • Places that block ventilation or are humid or dusty;
  • Environments subject to constant vibration;
  • Do not place accessories with naked flames, such as lighted candles, on the appliance.
  • Do not try to repair or intervene on the appliance yourself. Incorrect interventions or tampering can invalidate the guarantee. In case of damaged parts or suspected malfunction, stop using immediately and consult qualified personnel. Never immerse the appliance in water or other liquids. Do not place vessels filled with liquids (e.g. vases) on top of the apparatus.
  • Do not touch the appliance with wet hands and do not place it near sinks, tubs or containers of liquids. Only use the product if it is in perfect condition. If the appliance has been immersed in water or is damaged, contact qualified personnel.
  • The product should not be used if it has been dropped or if there are visible signs of damage.
  • Exposure to high volume levels can cause hearing problems, including permanent damage. Susceptibility to hearing loss varies from person to person, however constant exposure to high volume levels is harmful to everyone. Moderate the volume level.
  • Refer only to qualified service personnel to avoid voiding the warranty. For information and questions, contact the New Majestic S. p.A. technical assistance service.

Box contents

  1. GLOW  1 piece
  2. USB-C cables 1 piece
  3. AUX cable 3.5mm   1 piece
  4. Instruction manual   1 piece
  5. Warranty card   1 piece

Description of the keys

GLOW

MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-4

MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-5

Battery charging
The product has a built-in rechargeable battery that can be recharged via the USB-C cable and a DC 5V (2A) charger (not supplied). Before use, it is recommended to fully charge the battery.
During the recharging phase, the status LED will be on (the device will fully recharge about 3 hours). When the device is fully charged the LED indicator will turn off.
Note:

  • If the battery is completely flat, leave the device off and recharge it for at least an hour before using it.
  • Battery life (up to 4 hours with use at medium volume) may vary depending on the listening volume, the type of track being played, the associated external device and the status of battery wear.
  •  Recharge times may vary depending on the state of charge of the product and the characteristics of the charger used.
  • When the battery is low, the product will periodically emit a warning tone.

Operative instruction

On/Off
Long press the “Power On/Off” key to turn on/off the product.
When the product remains inactive for 5 consecutive minutes, standby is started.

Source change
Press the “MODE” button on the product several times to change the source choosing between Wireless Audio / USB / microSD / AUX.

Volume adjustment
Long press the “VOL+” and “VOL-” keys on the product to adjust the volume.

Wireless Audio Function
The product supports music playback via wireless connection to a smartphone or other compatible device.
NOTE: Compatibility with all wireless devices on the market cannot be guaranteed.

Wireless Audio Connection 

  • Turn on the speaker, select the Wireless Audio source using the MODE button.
  • Search for the name GLOW from your external device and choose it to carry out the pairing (enter “0000” if requested).
  • Once paired, you can start playback from the external device.
  • During music playback, you can briefly press the “Play / Pause” button to pause playback. To resume playback, press the “Play /Pause” button again.

Answer an incoming call
When a smartphone is paired with the speaker, this will ring if an incoming call is received, briefly press the “On / Off” key to answer. To reject an incoming call, long press the “On / Off” key. To end the call, briefly press the “On / Off” key while a call is in progress.

TWS function (True Wireless Stereo)
If you have two GLOW, you can activate the TWS function which allows you to pair two speakers together and obtain Stereo audio playback (the speakers will play the same audio at the same time).
Note: in order to use the TWS function, the two speakers must have a maximum distance of about 5 meters from each other in open spaces.

TWS function activation (how to associate two GLOW units together)

  • Make sure the speakers are not paired with any external devices.
  • Turn on both speakers and select Wireless Audio mode.
  • Double click rapidly the MODE key on the speaker to start the TWS pairing, a sound will confirm the pairing.
  • Once paired, the speakers will automatically pair with each other if turned on at the same time.
  • To deactivate the TWS function and unpair the speakers, double click rapidly the MODE button on the speaker after pairing.

USB/MicroSD function
Insert a USB stick/MicroSD card (containing songs in MP3 format) into the slot after turning on the speaker, playback will start automatically. Press “Play / Pause” button to pause/resume playback. Press the “Next Track” / “Previous Track” button to go to the next track / return to the previous track.
Note:

  • Compatibility with all USB storage devices on the market cannot be guaranteed.
  • External devices that require a rated voltage greater than 5V and a rated current greater than 200mA are not supported.
  • If you use a USB extension cable, the connected storage device may not be recognized or function properly.
  • Use only USB storage devices formatted with FAT16/FAT32 file system.

AUX function
To play audio via the AUX input connect one end of the appropriate cable to the 3.5mm AUX input of the speaker and the other to the external device. Select the correct source by pressing the “MODE” button several times then start playback directly from the connected external device.

NOTE: In AUX mode it is not possible to pass to the next/previous track with the “Next Track” / “Previous Track” buttons but it is necessary to carry out the operation directly from the connected external device.

Guide to any problems encountered.

 

 

MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-6 MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-7

Care and maintenance

  • Keep the product away from magnetic objects, water and heat sources.
  • To clean the device, use a soft , dry cloth. Do not use chemicals that could damage it.

CAUTION: Do not pour water or other liquids on the device when cleaning it. Water could enter the cracks and damage the speaker.

Technical specifications

MAJESTIC-GLOW-Wireless-Speaker-With-TWS -fig-8

Frequently Asked Questions

Q: How can I know if the battery is low?

A: The product will emit a warning tone periodically when the battery is low.

Q: Can I charge the speaker with any USB charger?

A: It is recommended to use a DC 5V (2A) charger for optimal charging performance.

Documents / Resources

MAJESTIC GLOW Wireless Speaker With TWS [pdf] Instruction Manual
GLOW Wireless Speaker With TWS, GLOW, Wireless Speaker With TWS, Speaker With TWS

References

Leave a comment

Your email address will not be published. Required fields are marked *