202069 Universal Guide Support
User Manual
Product information
In respect of accessory “universal guide” with item No. 202069
1.1 Manufacturer´s data
MAFELL AG, Beffendorfer Straße 4, D-78727 Oberndorf / Neckar,
Phone +49 (0)7423/812-0,
Fax +49 (0)7423/812-218,
e-mail: mafell@mafell.de
Use according to intended purpose / operation
The universal guide 1 (shift rail) can be used with all MAFELL machines that are equipped with a parallel guide fence as 2 (see illustration).
The angle fence 3 can be set to the desired value with the scale (at the reverse side of the universal guide) and fastened with the wing screw 4.
The universal guide 1 is placed against the workpiece with the angle fence 3 and the guide rail 5 is held in place on the workpiece manually. The MAFELL machine is introduced into the guide rail 4 with the parallel guide fence 2 and shifted across the workpiece. The universal guide 1 is secured with rubber strips against slipping and can in addition be fastened on the workpiece through the holes 5.
Documents / Resources
 |
Mafell 202069 Universal Guide Support [pdf] User Manual 202069 Universal Guide Support, 202069, Universal Guide Support, Guide Support |