MACHENIK K600S Mechanical Keyboard

DEVICE LAYOUT

1. USB TYPE-C PORT
2. POWER INDICATOR
3. NUM LOCK INDICATOR
4. CONNECTION MODE SWITCH
5. CAPS LOCK INDICATOR
6. BATTERY INDICATOR

TECH SPECS

GETTING TO KNOW YOUR KEYBOARD

1. CONNECTING VIA US
   • Toggle the Mode Switch to Cable mode
   • Connect the keyboard via USB cable to the device’ s USB port.
2. CONNECTING VIA 2.4GHz
   • Toggle the Mode Switch to 2.4G mode
   • Hold Fn+4 for 3 seconds till the light flashes fast in yellow, the keyboard is ready to pair
   • Insert the 2.4G dongle to your device, the 4 key stops flashing turns to solid yellow and the connection is done.
3. CONNECTING VIA BLUETOOTH
   • Toggle the Mode Switch to BT mode
   • Hold Fn+1/2/3 for 3 seconds till the indicators flashes fast in blue/green/pink, the keyboard is ready to pair.
   • Turn on your Bluetooth device and find “K600S-BIOOW 3.0 ” or “K600S-BIOOW 5.0” , then connect. When the keyboard is connected to the Bluetooth device, the indictor turns solid.
   • Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.
4. LIGHTING
   • FN+lns : Press to switch the cycle 20 lighting effects
   • FN+ENTER : Press to switch the cycle 8 lighting effects colors.( The light color can only be modified under the specified light effect.)
   • FN+ t / J : Backlights Brightness +/- , When set to the limit, NUM, CAP 2 lights flash 3 times, 5 levels adjustable.
   • FN++- / Effect Speed – / +, When set to the limit, NUM, CAP 2 lights flash 3 times, 5 levels adjustable.
5. RECORD CUSTOM LIGHTING EFFECTS
   • Press FN+BACKSAPCE to enter the record state , and press FN+BACKSAPCE again to start to record.
   • Select the key and press to choose the backlight color you want.
   • After finishing recording , press FN+BACKSAPCE to save the effects.
6. LOW POWER/CHARGING INDICATION
   • Battery voltage < 3.3V : Light effect automatically off, there is a key action when the power indicator slow flashing red light.
   • Battery voltage < 3.0V : Keyboard auto shut-off.
   • Charging : The power indicator light is always on in red, and the four power indicators in the upper left corner keep flashing in order. Each power indicator represents 25% of the electricity power
7. POWER SAVING MODE
   Keyboard in no operation 1 minute after the backlight off into the standby state, not operated 30 minutes into the Sleep state.
8. RESET
   FN+ESC : Press and hold 3 seconds, Restore the lighting effect to factory settings, clear all macro settings and paired devices.

WINDOWS SHORTCUTS

PACKING INCLUDE

• User manual *I,
• Certificate of conformity *I,
• Type-C *I,
• Switch puller *I,
• keycap puller *I,
• Additional switches *2

Documents / Resources

MACHENIK K600S Mechanical Keyboard [pdf] User Manual K600S Mechanical Keyboard, K600S, Mechanical Keyboard, Keyboard

References

• User Manual