MACHENIKE K600S-B100W Mechanical Keyboard: User Manual & Features

Getting to Know Your Keyboard

Device Layout

The device layout shows a 100-key, 96% compact full-sized mechanical keyboard. It includes a standard alphanumeric section, a function row (F1-F12), navigation keys, a numeric keypad, and modifier keys. Indicator lights for Num Lock, Caps Lock, and other functions are also depicted.

Tech Specs

Connectivity Instructions

1. Connecting via USB

1. Toggle the Mode Switch to Cable mode.
2. Connect the keyboard via USB cable to the device's USB port.

2. Connecting via 2.4GHz

1. Toggle the Mode Switch to 2.4G mode.
2. Hold Fn+4 for 3 seconds until the light flashes fast in yellow; the keyboard is ready to pair.
3. Insert the 2.4G dongle into your device. The '4' key stops flashing and turns solid yellow, indicating the connection is done.

3. Connecting via Bluetooth

1. Toggle the Mode Switch to BT mode.
2. Hold Fn+1/2/3 for 3 seconds until the indicators flash fast in blue/green/pink, respectively; the keyboard is ready to pair.
3. Turn on your Bluetooth device and find "K600S-B100W 3.0" or "K600S-B100W 5.0", then connect. When the keyboard is connected to the Bluetooth device, the indicator turns solid.
4. Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.

Keyboard Features

Windows Shortcuts

Lighting Controls

1. FN+Ins: Press to cycle through 20 lighting effects.
2. FN+ENTER: Press to cycle through 8 lighting effect colors. (Color can only be modified under the specified light effect.)
3. FN+↑↓: Adjust backlight brightness (+/-). 5 levels adjustable. At the limit, NUM, CAP 2 lights flash 3 times.
4. FN+/: Adjust effect speed (+/-). 5 levels adjustable. At the limit, NUM, CAP 2 lights flash 3 times.

Record Custom Lighting Effects

1. Press FN+BACKSPACE to enter record state, and press FN+BACKSPACE again to start recording.
2. Select a key and press to choose the backlight color.
3. After finishing recording, press FN+BACKSPACE to save the effects.

Indicator Lights

• Power Indicator: Slow flashing red light when battery voltage < 3.3V and any key is pressed. Auto shut-off at 3.0V. Solid red during charging, with four power indicators in the upper left corner flashing sequentially (each representing 25% power).
• Other Indicators: Num Lock, Caps Lock.

Power Saving Mode

The keyboard enters standby mode after 1 minute of inactivity (backlight off) and sleep mode after 30 minutes of inactivity.

Reset Function

Press and hold FN+ESC for 3 seconds to restore lighting effects to factory settings, clear all macro settings, and remove paired devices.

Packing Include

• User manual *1
• Certificate of conformity *1
• Type-C cable *1
• Switch puller *1
• Keycap puller *1
• Additional switches *2