How to Use GODIAG ECU OBD2 GPT Boot PINOUT
The GODIAG ECU GPT Boot AD Programming Adapter is designed for establishing ECU PINOUTs for a wide range of manufacturers and brands, following specific wiring definitions.
General Information and References
Reference 1: For detailed wiring diagrams using PCMFLASH PINOUT, please visit: https://pcmflash.ru/downloads/english.html
The document references various software and hardware packages related to ECU programming, including:
- AT200-148pcs
- DIMsport-1178pcs
- FGTech 153+PDF
- FOX-1406pcs
- PCMFlash PINOUT
- GODIAG GPT Boot OBD2 PINOUT User's Manual.docx
[Visual: Document icons representing various software packages and manuals.]
Specific ECU and Adapter Wiring Definitions
MED17.5 TC1766 ECU Example
This section provides wiring definitions for specific ECU types.
GODIAG Adapter Wiring Definition:
- 12V/ECU
- GND
- GPT0/S1
- GPT1/S2
- CAN L
- CAN H
[Visual: Image showing the GODIAG ECU GPT Boot AD adapter connected to a green circuit board.]
Wiring Diagram Wiring Definition:
| Function | T60 Pin | T94 Pin |
|---|---|---|
| +12V | 53 | 5, 87 |
| GND | 36 | 1 |
| GPT | - | - |
| CAN L | - | 67 |
| CAN H | - | 68 |
Note on GPT: For GPT connections on T60, pin 53 typically represents GPT 0/S1, and pin 36 represents GPT 1/S2.
[Visual: Pinout diagrams for T60 and T94 connectors, showing pin numbers and their corresponding functions.]
General GODIAG Adapter and Wiring Details
GODIAG Adapter Wiring Definition (Expanded):
- +12V/ECU
- +12V/IGN
- GND
- CAN H
- CAN L
- GPT 1/S2
- GPT 0/S1
- PCB board Boot
- PCB board CNF1
[Visual: Image showing the GODIAG ECU GPT Boot AD adapter connected to a green circuit board.]
Wiring Diagram Wiring Definition (General):
- +12V
- GREEN: INGICTION
- GND
- CAN-H
- CAN-L
- White
- Brown
- GREY: BOOT
- 3.3V
[Visual: Image of an ECU board with specific pins labeled: Pin 59:White, Pin5:+12V, GREEN:INGIGTION, Pin 54:+12V, Pin 14:Brown, Pin 2:GND, Pin 24 CAN-H, Pin 25:CANL, and a 3.3V label.]
Specific Product Connection Diagrams and References
Reference 2: Information regarding DIMsport KESSV2 KTAG product PINOUT connection diagrams.
Reference 3: For PINOUT connection diagrams of EVC products, please refer to: https://www.evc.de/en/product/bsl/ecu.asp
In EVC product connections, the 'L' connection point links to the Boot connection port on the GODIAG adapter, and the 'H' point connects to CNF1.
Reference 4: For PINOUT connection diagrams of kt-prog or FOX FGtech products, please refer to: https://wiring.fg-technology.uk/index.php?m=Home&c=wiring&a=index
In these diagrams:
- The Grey line connection point indicates 'Boot'.
- CNF1 or 3.3V connects to a 1KΩ resistor point or as shown in the diagram.
- The brown wiring connects to GPT0.
- The white wiring connects to GPT1.
Reference 5: For PINOUT connection diagrams of obdtuning products, please refer to: https://wiki.obdtuning.de/index.php/Hauptseite
This reference includes information on OBD2 Bench, GPT Bench, and Boot configurations.
Porsche BOSCH EDC 17CP14 ECU Example
GODIAG Adapter Wiring Definition:
- +12V/ECU
- GND
- K-Line
- CAN H
- CAN L
- PCB board Boot
[Visual: Image showing the GODIAG ECU GPT Boot AD adapter connected to a green circuit board.]
Wiring Diagram Wiring Definition:
| Function | T60 Pin | T94 Pin |
|---|---|---|
| Vcc/Power/+12Volt | 30 | 5 |
| GND/Ground/Masse | 31 | 1 |
| K-Line | - | - |
| CAN High | 14 | 68 |
| CAN Low | 15 | 67 |
| Boot Pin | - | - |
[Visual: Detailed image of a Porsche BOSCH EDC 17CP14 ECU board with an Infineon TriCore processor. Includes pinout diagrams for T60 and T94 connectors.]
