SpeaKa Professional 23-55Z Motorized TV Ceiling Mount - Technical Specifications
Dimensional Drawing Description
This document describes the technical drawing of a component, likely a mounting bracket, for the SpeaKa Professional 23-55Z TV ceiling mount. The drawing provides precise dimensions for manufacturing and assembly.
Overall Dimensions:
- Total Length: 509.3 units
- Total Height: 150 units
Component Features and Dimensions:
Left Side:
- Features a curved corner.
- A vertical distance of 67.5 units from the bottom edge to a horizontal reference line.
- A horizontal distance of 15 units from the reference line to the center of two circular mounting holes.
- Two circular holes, each with a diameter of Ø 8.5.
- The centers of these two holes are horizontally aligned and separated by 15 units.
- The center of the left hole is 67.5 units from the left edge.
- A vertical dimension of 25.66 units from the horizontal reference line to a point on the curved profile.
- A vertical dimension of 35.66 units from the bottom edge to another horizontal reference line.
Top Edge:
- Overall length indicated as 509.3 units.
- A segment of 481.66 units is marked.
- A segment of 369.66 units is marked.
- A keyhole-shaped slot is located towards the left-center:
- The distance from the top edge to the center of the circular part of the slot is 16 units.
- The circular part has a radius of R8.
- The slot extends from this circle, with the end of the slot having a radius of R3.75.
- The width of the slot opening is 14.5 units.
Center Section:
- A vertical dimension of 118 units is indicated, likely representing spacing between mounting points or sections. This dimension is shown twice.
Right Side:
- A vertical slot is present with:
- Width: 8.5 units.
- Length: 30 units.
- Positioned 56.7 units from the right edge.
- A circular hole with a diameter of Ø 8.5 is located, aligned with the top edge and the 118 unit vertical dimension.
- A rounded corner with a radius of R16 is present at the bottom right.
Bottom Edge:
- A keyhole-shaped slot is present towards the bottom left.
- The distance from the bottom edge to the start of this slot is 16 units.
- Two mounting points, indicated by crosses (+), are present. Their centers are aligned with the 118 unit vertical dimension.