Noise ColorFit Ore Smartwatch User Manual

Package Contains

The package includes the ColorFit Ore smartwatch and a charging cable.

Watch Overview

• Noise Health
• Noise Buzz
• Clock
• Workouts
• Sports Record
• Reminders
• Music
• Weather
• Watch Faces
• Stocks
• Flashlight
• Calculator
• Settings

Charging ColorFit Ore Smartwatch

Before first use, charge the battery to full capacity using the provided charging cable. A single charge lasts up to 7 days, varying with usage.

Charge ColorFit Ore

Plug the USB cable into a power adapter and an electrical socket (adapter not included). Place the magnetic charger on the magnetic charging points of the watch. The screen will show charging progress. Remove the charger once fully charged.

Power On/Off

Power On

Press and hold the crown for a few seconds to turn on the watch.

Power Off

Press and hold the crown for a few seconds. Select 'Power Off' and confirm.

Waking Up the Watch

To preserve battery, the watch screen turns off when not in use. Turn the screen back on by pressing the side buttons or turning the wrist.

Watch Navigation

The ColorFit Ore smartwatch features an AMOLED touch screen. Navigate by tapping, swiping side to side, up and down, and pressing the side button.

Button Navigation

Press the crown to turn on the display and access the main menu. Turn the crown to change watch faces.

Home Screen Navigation

The home screen displays the watch face. From the home screen:

• Swipe right to access widgets.
• Swipe left to access heart rate.
• Swipe up to access quick settings.
• Swipe down to check message notifications.

App Setup

Before pairing, ensure your smartphone and smartwatch are compatible. The app requests personal information (height, weight, sex) for stride length calculation and calorie burn rate. Turn on Bluetooth and location services on your mobile device. Download the NoiseFit app from the Play Store or App Store and install it. Create an account or log in.

Ensure your smartphone runs Android 9.0+ or iOS 11.0+ and is connected to mobile data or Wi-Fi.

Pair the Watch

Open the NoiseFit app and allow BT and GPS. Feed in personal information and health goals. Go to the 'Device' page in the app, tap 'Select Device', and select the watch name and MAC address to link.

Follow these steps:

• Turn on the watch.
• Scan the QR code using the NoiseFit app on your phone.
• Select 'Pair with device' and wait for it to pair.
• Choose the device from the range of devices.
• On iOS: Choose BT pairing when a pairing prompt appears. On Android: Connect it directly.

BT Call Connectivity

To establish BT calling connectivity, follow these steps:

For automatic connection

After pairing with the NoiseFit app, the watch's BT calling would be activated. Connect using your phone's BT to activate the calling feature.

Manual connection

If BT calling connectivity is not established, go to Settings, search for the device, and pair your smartphone to attend calls.

BT Call Connectivity Removal

To remove BT connection, unpair the watch from the phone's BT settings. Go to the phone's BT settings and disconnect Ore calling (last 4 digits of watch's MAC address). To remove BT, unpair from phone's BT settings and disconnect Ore calling (last 4 digits of watch's MAC address).

Watch Features

Noise Health

A suite of wellness features for a holistic route, including Blood Oxygen, Stress Monitor, and Sleep Tracking.

Activity

Check daily activity progress: calories burned, distance covered, active time, and steps.

Heart Rate

ColorFit Ore supports 24/7 heart rate tracking. Select measurement frequency in app settings. Go to 'Heart Rate' monitor and tap 'Tap to Measure'. View all-day data on the watch. Ensure arms and wrists are still during measurement.

Blood Oxygen

View highest and lowest Blood Oxygen levels. Go to the 'SpO2' monitor and let it measure. Ensure arms and wrists are still during measurement.

Sleep

View sleep records and sleep quality in various stages. The feature measures sleep cycle, sleep states (light and deep sleep), wake time, and REM.

Breathe

Adjust breathing rhythm for convenience. Choose from 3 speeds (fast, moderate, slow) and adjust duration. Go to the 'Breathe' feature, choose duration, and tap 'Start' to begin breathing cycles.

Stress

Supports 24-hour stress level measurement and viewing of all-day measurement data. Go to the 'Stress' feature and wait to measure. Ensure arms and wrists are still during measurement.

Noise Buzz

Manage calls from your connected smartphone via BT. Go to Noise Buzz to access recent logs, make calls via dial pad, and access contacts. If connected via BT, all calls are directed to the watch. Tap the switch icon to switch to your phone and take the call.

Clock

Alarm

Set alarms that sync with the watch. Add, delete, and enable/disable alarms. Label alarms.

Timer

Set a timer with a pre-set duration. The timer will remind you when time is up.

Stopwatch

Set a stopwatch. Lap times can also be set.

World clock

View time in up to 5 cities. Add cities in the NoiseFit app.

Workouts

Choose from over 100 workout modes. Add more workouts from the app. Control music and view exercise records in the app.

Sport Record

Check the progress report of your workouts.

Reminders

Add or edit reminders in the app.

Music

Control your favorite songs and podcasts from your phone. Play/pause music, skip to the next/previous track, and increase/decrease volume.

Weather

Supports 7-day weather viewing for your location. View today's weather and the next 6 days. Open the weather app on your watch and change the location to see weather for your current location.

Watch Faces

Switch between different watch faces, choose, and download cloud-based watch faces. Create your own watch faces in the NoiseFit app.

Changing the watch face

Personalize style by changing or customizing the watch face from the NoiseFit app or the watch.

On the watch

Touch and hold the home screen. Swipe and choose from watch faces.

In the app

Go to watch faces, select a watch face, and tap 'Save' to change it.

Stocks

Tap on stocks to see saved stocks. Add stocks.

Flashlight

Turn on the screen brightness to use as a flashlight. Go to the Flashlight feature to turn on.

Calculator

Perform basic calculations on your smartwatch.

Settings

Wrist Awake

Set 'Auto Screen Off' duration as per preference.

Tap To Wake Up

Enable or disable the 'Tap To Wake' feature.

Brightness

Set the watch's brightness.

Screen Timeout

Use 'Screen Timeout' feature to adjust screen-on duration.

AOD (Always On Display)

Choose to turn on/off the 'Always On Display' feature. Select preferred 'Off-Screen Dial' and set activation time.

DND (Do Not Disturb)

Set DND duration. Feed in the start and end time.

Ringtone Vibration

Set vibration level for notifications. Put the watch on silent mode.

Menu View

Choose between a grid and list view for the watch menu.

Auto Sports Detection

Turn on/off the Auto Sports Detection feature.

Widget Sorting

Personalize widget arrangement.

About Calls

Information about BT calling on your device.

Device Info

View device information: device name, Bluetooth name, and version.

QR Code

Scan the QR code to connect with the app.

Reboot

Restart the watch.

Power Off

Turn off the watch.

Reset

Reset the watch. All data and settings will be erased.

Quick Settings

Swipe up from the watch's home screen to access 'Quick Settings'. Options include: Find Phone, Brightness, DND, Power Saving Mode, Settings.

Device Information and Tips

Device Information

The ColorFit Ore smartwatch features:

• 2.1" AMOLED display
• Blood Oxygen measurement
• Stress monitor
• IP68 waterproof rating
• 100 sports modes

Tips

How do I update my ColorFit Ore?

Update via the NoiseFit app: Go to 'My Device', select 'Check for updates'.

How do I find my watch's current firmware version?

On the watch, go to 'My Device' in the NoiseFit app. Select 'Upgrade', then 'Check for updates' to see if an update is available.

How do I save battery?

Follow these steps: Minimize screen brightness. Limit notifications received from the NoiseFit app.

How does the watch estimate how many calories have been burned?

ColorFit Ore estimates calories based on physical data entered during setup and your account.

How do I change my activity goals?

In the NoiseFit app, go to 'My Profile' and select 'Goal'. Change your goals and confirm.

How do I log my weight?

Log weight for the first time during setup. Update weight later via the NoiseFit app ('My Profile' > 'Goal'). Update birthday, height, weight, and step length.

Safety and Handling Instructions

The device includes a rechargeable battery. Do not attempt to change the battery yourself, as it may cause damage or fire hazards. Do not tamper with battery terminals. Do not pierce or disassemble the device. Damaged batteries may overheat or cause fires. Do not place the device near fire or expose it to excessive heat. Use only Noise-approved chargers and cables. Improper chargers may damage the device and pose a safety hazard. If the device emits a foul smell or burning odour, stop using it immediately and contact Noise service centres. The device can be used in ambient temperatures from 0°C to 55°C. Do not use in a sauna or steam room. Do not use household cleaners. Use soap-free cleaners instead.

The device is dust and water resistant (rated at IP68). Follow tips for safe upkeep: Please make sure the device is not exposed to sea water or used in deep waters. Do not expose the device to high pressure water flow. Wipe the device clean with soft and clean cloth if exposed to water. Leave the device to dry up naturally. Do not open the device if it stops functioning upon exposure to water and despite following the above steps. Visit an authorized service centre for getting the device checked.

Medical Device Interference

The device contains components that may interfere with medical devices like pacemakers or other sensitive devices. Consult your physician before using the device. Ensure sufficient separation between the device and medical devices during all times.

Medical Use Advisory

Unless specified, the device and associated app-based or Noise-provided services are not intended for medical use. They are not suitable for diagnosis, treatment, cure, or prevention of any disease/health condition. The accuracy of devices is not equivalent to medical devices.

Hearing Loss

Prolonged exposure to high volumes may cause permanent hearing damage. Use the device ensuring sound levels are maintained at optimum levels.

Choking Hazard

The device is not a toy and contains small components that could cause choking. Not intended for use by or left unattended around small children or pets.

Skin Irritation Hazard

Prolonged use or exposure may cause skin irritation or allergies. If you feel soreness, tingling, numbness, burning, or stiffness, discontinue use immediately.

Disposal Information

Noise is committed to protecting the environment and preventing damage from e-waste. Dispose of e-waste responsibly. The symbol indicates the device/accessories (like USB cable, charger) should not be disposed of with household/domestic waste. In accordance with the Ministry of Environment, Forest and Climate Change, Noise has been granted Extended Producer Responsibility Authorisation (EPR Authorisation number: B-29016 (19)/EPR/20/WM-II Division dated 04.03.2021) by the Central Pollution Control Board. Noise contributes to protecting the environment by providing customers with e-collection centres. Details are available at: https://www.gonoise.com/pages/e-waste-collection. Recycling materials or other forms of reusing old devices is an important contribution.

Customer Support

If you experience any problem with the watch, it may be fixed by restarting. For assistance, please reach out to support.gonoise.com.