Noise Champ 2

What's in the box

The box contains:

• Charging cable x 1
• Noise Champ 2 smartwatch x 1

Charging the Noise Champ 2

Before first use

Before using your Noise Champ 2 for the first time, charge the battery to its full capacity using the provided charging cable. A full charge can last up to 7 days. Note: Battery life and charging time may vary based on usage and other factors.

To charge Noise Champ 2

1. Plug the USB cable into a power adaptor (power adaptor not included). 2. Plug the power adaptor into an electrical socket. 3. Place the magnetic charger on the magnetic charging points of the watch. 4. The screen will show the charging progress. 5. Remove the charger once the battery is fully charged.

Power Management

Power On

Press and hold the side button for a few seconds to turn on the watch.

Power Off

Long press the side button, choose power off, and confirm.

Waking Up the Watch

Press the side button to wake up the watch display.

Watch Navigation

Screen Navigation

The Noise Champ 2 smartwatch has a TFT colour touch screen. Navigate the watch by tapping on the screen, swiping side to side, up and down, and pressing the side button.

Home Screen Navigation

The home screen is the watch face. From the home screen:

• Swipe left or right to access shortcuts.
• Press the side button to go to the main menu.
• Swipe up to go to the quick settings menu.
• Swipe down to check your message notifications.

Button Navigation

Press the side button to turn on the watch display.

Setup and Pairing

Before Pairing

Ensure your smartphone and smartwatch are close to each other. Turn on Bluetooth and location services on your mobile device.

Download NoiseFit Sync App

On your smartphone, download the NoiseFit Sync app from the Play Store (Android) or App Store (iOS). Note: Ensure your smartphone is running Android 5.1+ or iOS 8.0+ and is connected to mobile data or Wi-Fi.

Pair the Watch

1. Scan the QR code from the watch and download the NoiseFit Sync app.
2. For iOS, select App Store, search NoiseFit Sync, download and install.
3. For Android, select Google Play, search NoiseFit Sync, download and install.
4. Open the NoiseFit Sync app and allow Bluetooth and GPS positioning.
5. Enter your personal information and health goals in the app.
6. Go to 'Add Device' in the app, select the device type, and link the watch.

Watch Face Customization

Overview

You can switch between different watch faces in the watch, choose and download cloud-based, animated watch faces, or create your own watch faces in the NoiseFit Sync app.

On the Watch

Touch and hold the home screen. Swipe and choose from the watch faces.

In the App

Go to watch faces, select your preferred watch face, and tap save.

Settings

• Preferences
• Raise to wake
• Reset
• Reboot
• Power off
• QR code
• About

Quick Settings

Swipe from the watch's home screen to access Quick Settings. You can set the brightness as per your preference.

Modes

DND Mode

Turn on DND (Do Not Disturb) mode to avoid receiving notifications on your watch.

Exam Mode

Set the duration of the exam and the timeline for receiving nudges.

School Mode

Turn on School Mode to manage notifications during school hours.

Flashlight

Tap the screen to turn on the flashlight.

Playtime & Scheduler

Playtime

Choose the sports you want to play and track progress in terms of time duration.

Scheduler

Follow the onscreen instructions in the NoiseFit Sync app to set your timetable.

Entertainment

It has games and other features to keep users entertained.

Tic Tac Toe

Play the game of Tic Tac Toe with a friend or as a single player.

Hamster

Play the game and set the highest score.

Theme Light

Choose from normal, party, concert, relax, and calm theme lights to set the display's appearance.

Music Control

Control your favourite songs and podcasts from your phone directly from your wrist, as long as the watch is connected to the NoiseFit Sync app. You can play/pause music and go to the next/previous track.

Noise Health

Heart Rate

Noise Champ 2 supports 24/7 heart rate tracking. To measure your heart rate in real-time, go to the Heart Rate Monitor and tap to measure. You can view all-day data on the watch and app. Note: Keep your arms and wrists still, with no space between the watch and your wrist, for accurate readings.

SpO2

Noise Champ 2 supports blood oxygen monitoring. To measure your blood oxygen, go to SpO2 and tap to measure. You can view all-day data on the watch and app. Note: Keep your arms and wrists still, with no space between the watch and your wrist, for accurate readings.

Breathing

The Breathe feature helps you adjust your breathing rhythm. Go to the Breathe feature, choose the time duration, and tap start to enter the breathing cycles. Note: Pressing a button during this period will interrupt breathing and require restarting.

Sleep Tracking

View your most recent sleep record and sleep quality across various sleep stages in the NoiseFit Sync app.

Utilities

Stopwatch

Set the stopwatch on the watch. To start, go to Stopwatch and tap the pause button to start.

Timer

Set a timer with a pre-set duration. The watch will remind you when the time is up.

Calculator

Use this feature to perform calculations.

Weather

Noise Champ 2 supports 3-day weather viewing for your chosen location, synced with the NoiseFit Sync app. View today's weather and the forecast for the next 2 days. Open the Weather app on your smartphone and change the location to see the weather of your current location.

Device Information and Tips

Disposal and Recycling Information

Electrical and electronic devices should not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service life to public collecting points. Recycling, reusing materials, or utilizing old devices contributes to environmental protection.

Regulatory and Safety Information

USA: Federal Communications Commission (FCC) Statement

This device complies with Part 15 of the FCC rules. Operation is subject to two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Compliance Notes

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Safety Instructions

• Do not disassemble the battery on your own.
• Do not expose Noise Champ 2 to extremely high or low temperatures.
• Charge the battery in a cool, ventilated room.
• Do not open, crush, bend, deform, puncture, or shred secondary cells or batteries. In case of battery break or leak, prevent battery liquid contact with skin or eyes. If this happens, immediately flush the areas with water (DO NOT RUB THE EYE) or seek medical help.
• Keep batteries out of children's reach and in a safe place to prevent danger.
• Do not place batteries in water.
• Do not short-circuit. Short-circuiting may damage the battery. It can occur when a metallic object, such as coins, causes direct connection of positive and negative terminals of the battery.
• Do not use your product in a sauna or steam room.
• Do not dispose of batteries in fire, as that may cause an explosion. Dispose of used batteries according to local regulations. Do not dispose of as household waste.
• Use only the supplied charging cable. Do not charge for more than 24 hours.
• Do not attempt to repair or maintain the watch yourself; service and maintenance should be performed by authorized technicians only. Any device failure should be referred to after-sales service personnel.
• To prevent device damage, accessory damage, and device failure, always protect the device against strong impact or shock.

Product Disclaimer

The Noise Champ 2 smartwatch is not a toy. The watch contains small components that could be a choking hazard and are not intended for use by small children or pets. Unless otherwise stated, devices are not a medical device and are not intended to diagnose, treat, cure, or prevent any disease. We develop products and services to track daily activity and wellness information as accurately as possible. The accuracy of devices is not intended to be equivalent to medical devices or scientific measurement devices.

In some cases, prolonged use of products may cause skin irritation. Prolonged contact may contribute to skin irritation or allergies. To reduce the possibility of irritation, keep the watch and watch band clean and dry. Do not wear it too tight. If you feel soreness, tingling, numbness, burning, or stiffness in your hands or wrists while or after wearing the watch, please immediately discontinue use.

Customer Support

If you experience any problem with the watch, it may be fixed by restarting your watch. For any assistance, please reach out to us at support.gonoise.in.