Baby Trend Bounce N' Glide 3-in-1 Activity Center Walker

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered or removed serial number, invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

The Customer Service Department can be contacted at 1 (800) 328-7363, Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

GARANTIA

NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.

La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la compra. Cualquier producto que haya sido sometido a uso inadecuado, abuso, uso anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental, alteración o accidente, o cuyo número de serie haya sido alterado o removido, anula todos los reclamos contra el fabricante. Cualquier daño a la propiedad durante la instalación es la exclusiva responsabilidad del usuario final.

El Departamento de Servicio al Cliente está disponible llamando al 1 (800) 328-7363, de lunes a viernes de 8:00 a.m. a 4:30 p.m. (PST). Se requiere una Autorización de Devolución antes de poder devolver el o los productos a Baby Trend®. Visite http://babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.

Important Usage Instructions

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Lea todas las instrucciones ANTES de armar y USAR el producto. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.

Image of the Baby Trend Bounce N' Glide 3-in-1 Activity Center Walker, showing the seat, tray, and base with toys.

Age recommendation: 4 months+

Safety Warnings

⚠️ WARNING: Younger infants between 4 to 6 months are at a critical age for safety in a seated activity center. Your child MUST ALREADY be able to hold their head upright and steadily unassisted before being placed in the activity center. DO NOT use the activity center if they cannot.

⚠️ STRANGULATION HAZARD: Strings can cause strangulation! Do not place items with strings around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over the product or attach strings to toys. This Stationary Activity Center is for infants at least 4 months old who can hold their head up unassisted.

⚠️ FALL HAZARD!: Babies can fall from the unit, resulting in head injuries. Never leave a child unattended; always keep the child in view. Never use near stairs, stoves, ovens, heaters, fireplaces, swimming pools, or other dangerous areas. To avoid tip-over, place the product on a flat, level surface. NEVER lift this product with your child in it. NEVER place the product on countertops, tables, or any other elevated surface. Do not use the Dome base alone or leave it on the floor to avoid slipping or tripping. Always store the Dome away when not in use. ALWAYS make sure to lock the seat before using the walker mode (refer to Fig. 8b).

IMPORTANT! Discontinue use if the child can climb out, begins to walk, reaches 30 pounds (approx. 13.5 kg) or 32 inches (approx. 80 cm) in height, or can walk unassisted.

Do not use the stationary activity center if it is damaged or broken. Discontinue use if any part becomes damaged. Contact customer service at 1-800-328-7363 for replacement parts or repairs.

Read all instructions before assembly and use. Keep instructions for future reference.

IMPORTANT! To ensure safe operation, follow these instructions carefully. Keep these instructions for future reference.

IMPORTANT! Before assembly and each use, inspect the product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

⚠️ WARNING: Use only on flat surfaces free of objects that could cause the walker to tip over. DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF. Periodically inspect seat pad plastic tabs to ensure they are secured. DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN. Clean the stoppers on the walker base regularly to maintain stopping performance. Clean the wheels on the walker regularly to maintain rotating performance.

⚠️ WARNING: To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.

⚠️ WARNING-STAIR HAZARD: Avoid serious injury or death by blocking stairs/steps securely before using the walker, even with the hand brake. Baby walkers are not designed for use on carpets and rugs.

ADVERTENCIA: Los bebés más pequeños, entre 4 y 6 meses, están en una edad crítica para que se considere seguro que jueguen en un centro de actividades donde están sentados. Su hijo YA DEBE poder mantener la cabeza erguida y sostenerse firmemente sin ayuda antes de ser colocado en el centro de actividades. NO use el centro de actividades si el bebé no puede mantenerse de esta forma.

PELIGRO DE ESTRANGULAMIENTO: ¡Las cuerdas pueden causar estrangulamiento! NO coloque artículos con cuerdas alrededor del cuello del niño, como por ejemplo cordones de capuchas o sonajeros. NO suspenda cuerdas por encima del producto ni sujete cuerdas a los juguetes. El centro de actividades fijo es para uso exclusivo de bebés mayores de 4 meses que pueden mantener la cabeza erguida sin ayuda.

PELIGRO DE CAÍDA!: Los bebés se pueden CAER de la unidad y sufrir lesiones en la cabeza. Nunca pierda de vista al niño. Siempre mantenga al niño a la vista mientras esté en el producto. Nunca lo use cerca de escaleras, estufas o calentadores, chimeneas, piscinas u otras áreas peligrosas. Para evitar vuelcos, coloque el producto sobre una superficie plana y pareja. NUNCA levante este producto con su hijo encima. NUNCA coloque el producto sobre mesadas, mesas o cualquier otra superficie elevada. No utilice la base del Domo sola ni la deje en el suelo para evitar resbalones o vuelcos. Siempre guarde el domo fuera del camino y del suelo cuando no esté en uso con el producto. SIEMPRE asegúrese de bloquear el asiento antes de usar el modo andador. Consulte la Fig. 8b correspondiente.

¡IMPORTANTE! Deje de usar el modo si el niño puede salirse o comienza a caminar, si pesa 13,5 kg (30 lb) o mide 80 cm o si puede caminar sin ayuda.

No utilice el centro de actividad estacionario si está dañado o roto.

ADVERTENCIA: Deje de utilizarlo si alguna pieza se daña. Comuníquese con nuestro servicio al cliente al 1-800-328-7363 para pedir piezas de remplazo o para su reparación.

Lea todas las instrucciones antes de armar y usar el centro de actividades fijo. Conserve las instrucciones para su uso futuro.

¡IMPORTANTE! Para asegurar el funcionamiento seguro de su producto, siga estas instrucciones cuidadosamente. Por favor, conserve estas instrucciones para referencia futura.

¡IMPORTANTE! Antes de armar y cada vez que vaya a usar este producto, revise que no tenga piezas de metal dañadas, uniones flojas, piezas ausentes o bordes puntiagudos. NUNCA utilice el producto con piezas ausentes o rotas.

¡IMPORTANTE! Se requiere el montaje por parte de un adulto.

ADVERTENCIA: Utilícelo solamente en superficies planas libres de objetos que puedan hacer que el andador tropiece y se caiga. NO USAR HASTA QUE EL BEBÉ SE PUEDA SENTAR POR SÍ MISMO. Periódicamente inspeccione las lengüetas plásticas del cojín del asiento para verificar que estén bien ajustadas al cuerpo. NO USAR EL ANDADOR SI ESTÁ DAÑADO O ROTO. Limpie los tapones de goma en la base del andador regularmente para mantener la acción de frenado. Limpie las ruedas del andador regularmente para mantener el rendimiento de rotación.

ADVERTENCIA: Para evitar quemaduras, mantenga al niño alejado de líquidos calientes, cocinas, radiadores, calentadores de ambientes, chimeneas, etc.

ADVERTENCIA-PELIGRO CON LAS ESCALERAS: Evite lesiones graves o la muerte bloqueando las escaleras o los escalones de manera segura antes de usar el andador, incluso cuando se usa el freno de mano. Los andadores para bebés no están diseñados para usarse en alfombras y tapetes.

Parts List

Check that you have all the parts for this model before assembling the Activity Center. Verifique que tenga todas las piezas para este modelo antes de montar El Centro de Actividades.

• Diagram of the Seat and Cover (Asiento y sostén)
• Diagram of the Tabletop (Tapa superior)
• Diagram of the Air Bounce Board (Tablero de Rebote de Aire)
• Diagram of the 3-Piece Base (Base)
• Diagram of three Table Legs (3 patas de mesa)
• Diagram of the Mirror toy (Espejo)
• Diagram of the Lion toy (León)
• Diagram of the Flower toy (Flor)
• Diagram of the Toy Bar (Barra de juguetes)
• Diagram of the Button Board (Tablero de botones)

Assembly Instructions

3-Piece Base

1. Select the two pieces of the base that together spell "FRONT" (refer to Fig. 1a). Then attach the two pieces (refer to Fig. 1b). Attach the remaining piece together.
2. Diagram showing the two base pieces joining to form the base structure.
3. Diagram showing the completed base structure with "FRONT" indicated.

Table Legs

1. Insert each leg into the base until it is securely attached (refer to Fig. 2a).
2. Diagram showing a table leg being inserted into a socket on the base, with an audible "Click" indicating secure attachment.
3. Insert the tabletop into all 3 legs (refer to Fig. 2b). Ensure that each pin clicks into position and secure all legs into place.
4. Diagram showing the tabletop being placed onto the three attached legs.
5. Ensure the tabletop tray logo is aligned with the base's "FRONT" lettering (refer to Fig. 2c).
6. Diagram showing the alignment of the tabletop tray logo with the "FRONT" marking on the base.

Swivel Seat Mode

1. Push the tabs inward to detach the seat from the top plate before assembling (refer to Fig. 3a).
2. Diagram showing tabs being pushed inward to release the seat from the tabletop.
3. If needed, align the seat to the center opening and press it down firmly. The seat must completely click into the tabletop (refer to Fig. 3b). Rotate the seat to ensure the swivel function is active.
4. Diagram showing the seat fully attached and seated on the tabletop, with an arrow indicating rotation to test the swivel function.
5. To adjust the seat strap, push up on the strap to tighten. Flip the clip to loosen the seat (refer to Fig. 3c).
6. Diagram showing the seat strap adjustment mechanism: pushing upwards to tighten and flipping a clip to loosen.

Battery Instruction (Lion Toy)

1. The Lion Toy requires 2 AAA batteries. Refer to Fig. 3 for battery installation. Unscrew the battery door and pull outward. Install batteries as shown. Secure battery door with screw.
2. Diagram illustrating the battery compartment of the Lion toy, showing where to insert two AAA batteries and the location of the battery door and screw.

CAUTION: Keep batteries out of children's reach. To prevent battery leaks:

• Remove batteries when storing product for a long time.
• Dispose of used batteries immediately.
• Always replace the entire set of batteries at one time.
• Never mix old and new batteries, or batteries of different brands or types.
• Requires two AAA batteries (not included) for toy operation.
• Non-rechargeable batteries are not to be recharged.
• Batteries need to be inserted with the correct polarity.
• The supply terminals are not to be short-circuited.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.

Height Positions

IMPORTANT: Never change the height when the baby is in the walker.

1. To adjust the height position(s), push the button on the table leg to the desired position. Repeat for the other sides.
2. Diagram showing a button on a table leg being pushed to adjust height. It indicates that each leg has 3 adjustable height levels and all 3 legs must be adjusted to the same level.

Toy Attachment

1. Place toys in the order shown. Toys must be properly attached before use (refer to Fig. 6a). Note: ONLY the flower, lion, and mirror stand-alone toys are interchangeable.
2. Diagram showing the correct order for attaching the toys to the activity center tray.
3. All toys must be aligned with their single or double tab housings on the activity center tray (refer to Fig. 6b). Set the toy base in alignment with the tabletop fitting. From underneath the tabletop, push the lock up and turn it left to lock.
4. Diagram illustrating the alignment of toy tabs with the tray slots.
5. Use the diagram below (refer to Fig. 6c) to lock the toys onto the tabletop: (1) Push the tab up and rotate it left to lock. (2) Rotate the tab right to release the toy. (3) Always put the small tab lock back into the tabletop when not in use.
6. Diagram sequence showing the steps to lock a toy into place: pushing a tab upwards, rotating it left to lock, and rotating it right to unlock.

Front Wheels

This product converts into (3) Modes: Walker Mode, Air Bouncer Activity Center Mode, and Stationary Activity Center Mode. See pages 13-14 for mode usage.

1. Locate the two front wheels under the base (refer to Fig. 7a).
2. Diagram showing the location of the front wheels under the walker base.
3. Pull the wheel out from the base, and straighten the wheel (refer to Fig. 7b).
4. Diagram showing a front wheel being pulled out from its socket and straightened.
5. Push the wheel upward until it clicks into the base (refer to Fig. 7c). Repeat for the other side.
6. Diagram showing the front wheel being pushed upwards into its socket until it clicks.
7. HIDE WHEELS: To tuck away the wheels, pull the wheel out from the base and reverse the steps above. Repeat for the other side.

Rear Wheels

1. Locate the two rear wheels on the diagram (refer to Fig. 8a).
2. Diagram showing the location of the rear wheels on the walker base.
3. Pull the wheel out from the base, and straighten the wheel (refer to Fig. 8a).
4. Push the wheel upward until it clicks into the base (refer to Fig. 8b). Repeat for the other side.
5. Diagram showing a rear wheel being pulled out, straightened, and pushed upwards into its socket until it clicks.
6. HIDE WHEELS: To tuck away the wheels, pull the wheel out from the base and reverse the steps above. Repeat for the other side.

Modes of Use

Walker Mode

WARNING: For 4 months up to 30lb. use ONLY. ALWAYS make sure to lock the seat before using the walker mode. Refer to Fig. 8b.

1. ATTENTION: MUST remove the Air Bouncer Board.
2. To use the wheels, refer to steps 7 & 8.
3. Ensure the seat is aligned with the front tray and front of the base (refer to Fig. 9a).
4. Diagram showing the seat correctly aligned with the front tray and base for Walker Mode.
5. LOCKING SWIVEL SEAT TO FRONT POSITION: To lock the seat in place, locate the lever underneath the tabletop. The seat tab should be aligned with the lever. Push in, to lock (refer to Fig. 9b).
6. Diagram sequence illustrating the seat locking mechanism: showing the lever under the tabletop and the seat tab aligning with it, then pushing to lock.

Air Bouncer Activity Center

1. Tuck away the front and rear wheels before inserting. Reverse steps 7 & 8.
2. Insert the Air Bouncer Board into the bottom platform (refer to Fig. 9). NOTE: Ensure to push down once it lays flat.
3. Diagram showing the Air Bouncer Board being placed into the base of the activity center.

Stationary Activity Center Mode

WARNING: For 4 months up to 30lb. use ONLY.

1. ATTENTION: MUST remove the Air Bouncer Board and tuck wheels in to set into "Stationary" Mode.
2. Tuck in the wheels, refer to steps 7 & 8.
3. To remove, gently lift the walker up, and remove the Air Bouncer Board (refer to Fig. 10).
4. Diagram showing the walker being lifted and the Air Bouncer Board being removed.

Disassembly

Disassembling the Activity Center

Ensure all toys are removed from the tabletop before disassembling.

1. SEAT REMOVAL: To remove the seat, use the edge of the seat to lift it off the tabletop (refer to Fig. 11a). Ensure all toys are removed, and the seat.
2. Diagram showing the seat being lifted off the tabletop from the edge.
3. TABLETOP: To remove, push the 3 pins located on each table leg (refer to Fig. 11b). Repeat the process for the other table legs.
4. Diagram showing the tabletop being detached by pressing pins on the legs.
5. 3 TABLE LEGS: To remove, locate the tab underneath the base. Pull the tab towards you and remove the leg (refer to Fig. 11c). Repeat for the other sides.
6. Diagram showing a table leg being detached by pulling a tab from the base.

Maintenance

Seat Fabric

DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

1. To remove the seat fabric for maintenance, pull out all the plates from the tab on the seat base (refer to Fig. 12a).
2. Diagram showing seat fabric plates being detached from the base.
3. To reattach the fabric, insert the warning label side towards the backrest of the seat base. Fold the fabric over and insert the rear center plate into the tab. Connect all plates around the seat base tabs. All plates and tabs must be secured before use (refer to Fig. 12b).
4. Diagram showing the seat fabric being reattached, aligning plates and tabs.

Stopper Replacement

For replacement, if lost or damaged ONLY.

1. The Stoppers are there for Stair Safety reasons; do NOT remove the stoppers unless for replacement purposes.
2. REMOVAL: To remove, pull out the stopper (refer to Fig. 13a).
3. Diagram showing a stopper being pulled out of its housing.
4. RE-INSTALL: Push the stopper into the housing completely (refer to Fig. 13b). Ensure to apply enough pressure when inserting the stoppers.
5. Diagram showing a stopper being pushed back into its housing.

Wheel Replacement

1. REMOVAL: (1) Pull the small tab away from the pin. (2) Pull the pin out of the slots (refer to Fig. 14a). NOTE: May require a screwdriver to completely remove the pin.
2. Diagram showing the first steps for wheel removal: pulling a tab and then a pin from the wheel assembly.
3. Release the wheel from the housing (refer to Fig. 14b). Repeat for the other sides.
4. Diagram showing the wheel being detached from its mounting.
5. RE-INSTALL: To re-attach the wheels, reverse the steps above. Ensure the holes on the wheels are aligned with the holes on the base (refer to Fig. 14c).
6. Diagram showing the wheel being reinstalled, aligning holes on the wheel with the base.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.