Baby Trend Orby Activity Walker

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or with an altered/removed serial number invalidates all claims. Damage to property during installation is the sole responsibility of the end user.

Customer Service: 1 (800) 328-7363, Monday through Friday, 8:00 a.m. - 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. For complete warranty details, please visit: http://babytrend.com/pages/limited-warranty.

Important Instructions

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Safety Warnings

WARNING: Please read all instructions before assembly and use of the walker. Keep instructions for future use.

WARNING: Never leave child unattended. Always keep child in view while in walker.

WARNING: Use only on flat surfaces free of objects that could cause the walker to tip over.

WARNING: To reduce chance of child slipping out of the seat, check that both feet of the child touch the floor. Never carry walker with the child in it, as the child may get hurt or slip out.

WARNING: To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.

WARNING - STAIR HAZARD: Avoid serious injury or death, block stairs/steps securely before using walker.

• This walker is to be used only by infants who are old enough to sit upright on their own and are ready to learn to walk (about 6 months old). DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF.
• Discontinue using the walker when the child can walk unassisted, reaches 30 lb. (13.5 kg) in weight, or reaches 32 inches (80 cm) in height.
• DO NOT ADJUST TRAY HEIGHT WITH THE BABY IN THE WALKER.
• Periodically inspect seat pad plastic tabs to be sure they are secured in the body. DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN. Discontinue using should any part become damaged. Please contact customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.
• Clean the stoppers on walker base regularly to maintain stopping performance. To clean the seat pad, use only mild household soap and warm water with a sponge or cloth. DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

If you experience any difficulty with assembly, missing parts, or use, please DO NOT return this item to the store. Contact Customer Service directly for assistance. Call toll-free 1-800-328-7363, Monday - Friday, between 8:00 a.m. and 4:30 p.m. (PST).

Parts List

Check that you have all the parts for this model before assembling the walker.

• Front
• Rear
• Base
• Seat
• Activity Tray

Assembly Instructions

IMPORTANT! To ensure safe operation, please follow these instructions carefully. Keep for future reference.

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

IMPORTANT! Adult assembly is required.

IMPORTANT! Always check that the baby walker is locked in the open position before using.

IMPORTANT! Carefully remove parts from box. Check that you have all the parts for this model before assembling the baby walker.

Step 1: Open the Walker

To open the baby walker, raise the tray up until the walker clicks into position. [See Figure 1]

Step 2: Adjust Height

The baby walker can be used for 3 different heights. From underneath the front of the walker, turn the safety button to the right and slide vertically to adjust the height. [See Figure 2]

Step 3: Secure Safety Button

Check that the safety button is turned horizontally to prevent the accidental release of the mechanism. [See Figure 3]

Step 4: Connect Seat Fabric

Connect the seat fabric by inserting the plastic button pins into the upper, larger openings. Then push them firmly downwards until they SNAP into position. Push the pins from the top of the opening all the way down to the bottom. [See Figure 4]

Step 5: Attach Straps to Tray

Locate the straps with plastic buckles on the back of the seat and corresponding slots on the tray. Insert each strap into its corresponding slot. [See Figure 5]

Step 6: Secure Straps Under Tray

From the underside of the tray, pull each strap completely through its slot and pivot the plastic buckle to lay flat against the underside of the tray. [See Figure 6]

Step 7: Thread Support Strap

Underneath the walker, thread the end of the support strap through the loop on the seat bottom. Slip the strap through the slot at the end of the height adjustment bracket. [See Figure 7]

Step 8: Secure Support Strap

Next, thread the support strap through the opening in the rectangular ring and pull snug. [See Figure 8]

To Remove Seat Fabric

To remove the seat fabric, reverse steps 7 and 8, followed by the reversal of steps 4 through 6.

Step 10: Install Front Wheels

Place walker on a solid flat surface with the bottom of the base facing upward. Insert the pins of the front wheels into their housing, pressing them until they snap into position. Please check that wheels are locked into place before proceeding. [See Figure 10]

Step 11: Install Rear Wheels

Insert the pins of the rear wheels into their housing, pressing them until they snap into position. Please check that wheels are locked into place before proceeding. [See Figure 11]

To Assemble Activity Tray

Activity Tray Components:

• Ball Popper: Features side-to-side clicking motion.
• Tumbler: Clicks when twisted.
• Lights up with music.
• Speaker.
• Push button to activate music and select songs.

Battery Installation (Music Unit):

The music unit requires three size AA batteries (not included). Alkaline batteries are recommended for longer battery life.

CAUTION: To prevent possible battery leakage, follow these guidelines:

• Do not mix old and new batteries.
• Do not mix different battery types (alkaline, standard, or rechargeable).
• Keep batteries out of reach of children.
• Always dispose of batteries properly.
• Remove batteries when the unit is not in use for long periods.
• Never leave exhausted batteries in the unit.
• Never try to recharge non-rechargeable batteries.

Step 12: Install Batteries in Activity Tray

The activity tray requires 3 AA batteries. Unclip the battery door and pull outward. Install batteries as shown [See Figure 12]. Re-install battery door and push until it clicks into place.

Step 13: Attach Activity Tray

Set the activity tray into the walker tray. Push firmly on all sides until the activity center clicks into place. [See Figure 13]. Do not use the activity tray if it has been damaged or broken.

Periodically check to see if the activity center is locked into place by pulling up on it.

To Fold Walker

Step 14: Fold the Walker

To fold the walker, turn the button to the right to unlock and push it to release. Then push the tray downward. [See Figure 14]

Placing Child in the Walker

WARNING: To reduce the chance of a child slipping out of the seat, check that both feet of the child touch the floor. Never carry the walker with the child in it, as the child may get hurt or slip out.

Always check the walker prior to each use to ensure that the seat is snapped in place and that the walker has no loose or broken parts. Do not use the walker if it is damaged, broken, or missing parts.

Before placing your child in the walker, determine that your child is developmentally ready. Generally, a child should be able to sit upright unassisted and have adequate neck strength for good head control. Typically, a child should be at least 6 months old. Infants develop at different rates; discuss walker use with your pediatrician.

Adjust the seat height to the lowest setting. Place your child in the walker and check that both feet touch the floor. The child should have only part of their weight on their feet when legs are straight. Adjust walker height as needed as your child grows. Do not adjust height with the child in the walker.

Discontinue using the walker if your child attempts to climb out, reaches 30 lb. (13.5 kg) or 32 inches (80 cm), or can walk unassisted.

The baby walker can be used for 3 different heights. To adjust height, remove the baby from the walker. Refer to Step 2 for adjustment instructions. Adjust to desired height.

When the position is selected, check that the safety button is turned 90 degrees to prevent accidental release. Always follow this procedure. Never use the walker if the button is not in the sideways position. Important: Never change the height when the baby is in the walker.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Baby Trend Customer Service

The Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 a.m. - 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.