COOSPO BC200 Cycling Computer User Manual

Charging the Device

Before first use: Please charge the device fully.

Charging Method: Use a DC 5V power adapter or connect to a computer via USB cable.

The battery icon ? will flash during charging and remain solid when fully charged.

To charge, open the rubber cover and connect the device with the USB cable.

[Visual Description: A diagram shows a USB cable connecting the device to a DC 5V power adapter or a computer.]

Button Functions

• Up: Long press to turn on/off backlight.
• Down: Long press to turn off the device. Short press to turn on the device (automatically shuts down after 10 minutes of inactivity when not in motion).
• OK: During cycling, press to mark a lap.
• Back: During cycling, press to pause.

[Visual Description: A diagram labels the buttons on the device and indicates their functions. The display shows GPS ?️, Time ⏰, Temperature ?️, and Battery Level ?.]

Initial Setup

1. Language Selection

   For first-time use, select your preferred language. English is available.

2. User Profile Setting

   To ensure accurate exercise calculations, please set your user profile correctly:

   • Gender: Male / Female
   • Age: [Input field]
   • Weight: [Input field] (e.g., 70kg)
   • Height: [Input field] (e.g., 175cm)

   [Visual Description: A screen shows fields for Gender, Age, Weight, and Height.]

3. Bike Profile Setting

   Configure settings for up to three bikes:

   • Bike 1:
   • Status: On / Off
   • Weight: [Input field] (e.g., 12.5kg)
   • Wheel Circumference: [Input field] (e.g., 2096mm)
   • Total Distance: [Value] (e.g., 0km) - Option to reset.
   • Speed Source: Set priority for speed data (e.g., Spd&Cad).

   [Visual Description: A screen displays options to activate bikes, set their weight, wheel circumference, total distance, and speed source.]

Icons and Status Indicators

Standard Accessories

• Main Device x1
• Charging Cable x1
• User Manual x1
• Out Front Bike Mount x1
• Standard Bike Mount x1
• Rubber Pad for Out Front Mount x2
• Rubber Pad for Standard Bike Mount x1
• Rubber Ring (Big x 2, Small x 2)
• Screw (Big x 2, Small x 2)
• Wrench x1

[Visual Description: An image displays all the included accessories laid out.]

Installation Guide

a. Standard Mount Installation

1. Install a rubber pad onto the mount.
2. Tie the mount onto the handlebar using the rubber rings.
3. Securely tie up the mount.
4. Install the main device onto the mount by rotating it 90 degrees.

[Visual Description: Step-by-step illustrations show attaching a rubber pad, securing the mount to the handlebar with rubber rings and screws, and finally attaching the device to the mount.]

b. Out Front Mount Installation

1. Install a rubber pad onto the handlebar.
2. Unscrew the screw in the mount.
3. Install the mount onto the handlebar over the rubber pad and tighten the screw.
4. Install the main device onto the mount by rotating it 90 degrees.

[Visual Description: Step-by-step illustrations show attaching a rubber pad, loosening a screw on the mount, securing the mount to the handlebar, and attaching the device to the mount.]

Common Wheel Sizes and Circumferences

Use this table to find the correct circumference for your bike's wheel size.

Other Settings

• Zone: Set values for heart rate zones, power zones, and cadence zones.
• Alarm: Configure alarms for heart rate, power, and cadence. The device will beep and display a warning message when preset values are reached.
• Smart Pause: When enabled, the cycling recording automatically pauses when speed is 0 and resumes when speed is detected.
• Altitude: Calibrate the current altitude by entering the correct value.
• Smart Lap: Set the location or distance criteria for automatic lap counting.
• Tone: Adjust key tone and warning tone settings.
• Back Light: Configure backlight mode (e.g., auto-off) and brightness.
• Unit: Select between Metric System or Imperial System.
• Page Setting:
  • Data Page Display: Configure the content displayed on up to 5 custom data pages (On/Off).
  • Self-defined parameter: Select up to 9 parameters to display on each custom page (e.g., Speed, Heart Rate, Time, Avg.HR, Distance, Max.HR, Cadence, %Max.HR, %LTHR, Power, Lap.Avg.HR, Lap.Max.HR, Altitude, Temp, Grade, Calorie, Time.Move).

[Visual Description: Screens show options for setting zones, alarms, smart pause, altitude calibration, smart lap, tones, backlight, units, and custom data page configurations.]

Connecting Sensors

Ensure sensors are in wake-up mode (e.g., wear the heart rate monitor, rotate the crank or wheel for cadence/speed sensors).

Sensor Management

You can set up and manage sensors for up to 3 bikes.

• Activate Bike 1: On / Off
• Sensor Types: Heart Rate ❤️, Speed ?, Cadence ?, Speed & Cadence (2-in-1) ??, Power ⚡.
• Search: The device searches for available sensors.
• Pairing: Select a scanned sensor (e.g., HRM803-ABC ID:1234567) to pair.

[Visual Description: Screens show the process of searching for sensors, displaying found sensors with IDs, and options to activate bikes and connect specific sensor types.]

Add New Sensor / Turn Off Old Sensor

When connecting a new sensor of the same type, you can choose to connect the new one or turn off the old one.

[Visual Description: A pop-up window offers options to "Connect New" or "Turn Off" an existing sensor.]

Power Calibration

For ANT+ compatible power meters, select the power meter and then choose "Calibrate" ⚙️. The device will display the current value (e.g., 150W) and calibration progress.

[Visual Description: A screen shows the current power value (e.g., 150W) and a "Calibrating" status.]

Note: Power calibration is only supported for ANT+ power meters; Bluetooth power meters do not support this function.

Starting a Ride

1. GPS Acquisition

   When the device is turned on, it automatically searches for satellite signals ?️. This may take 15-90 seconds. Ensure satellite signals are acquired before starting.

   [Visual Description: The display shows GPS status, indicating signal acquisition or availability.]

2. Connect with Phone (Optional)

   Sync time with your phone if desired.

3. During the Ride

   The display shows real-time data such as:

   • Speed: 23.2 km/h ?
   • Distance: 9.20 km ?
   • Time.Move: 00:23:43 ⏰
   • Heart Rate: 133 bpm ❤️
   • Cadence: 93 rpm ?
   • Power: 293 w ⚡
   • Altitude: 82 m ⛰️
   • Temperature: 23.0 °C ?️
   • Calories: 223 kcal ?

   Button Functions During Ride:

   • Press 'OK' to mark a lap ?.
   • Press 'Back' to pause the ride ⏸️.
   • Use 'Up'/'Down' buttons ⬆️⬇️ to scroll through different data pages.

   [Visual Description: The device screen displays various cycling metrics like speed, distance, heart rate, power, etc. Icons indicate accessory connection status.]

View Ride History

Access past ride data:

• Navigate to the 'History' section.
• Select a date (e.g., 2019/10/21 16:35) to view ride details.
• Scroll through pages (e.g., Page 1/7) to see multiple rides.
• View detailed lap data, including average and maximum values for Speed, Heart Rate, Cadence, and Power.
• Options to Delete rides are available.

[Visual Description: A list of past rides with dates and times is shown. Selecting a ride displays detailed metrics like distance, average/max speed, heart rate, cadence, and power.]

Syncing Data

USB Connection

1. Turn on the device's "USB connection" function.
2. Connect the device to your computer using a USB cable.
3. Your computer will recognize the device as a new disk. Navigate to the "fit activity" folder and copy the .fit files.
4. Upload the .fit files to platforms like Strava.com to view your data.

Bluetooth Connection (CoospoRide App)

1. Download the "CoospoRide" app from Google Play or the App Store. (Compatible with iOS 7.0+ / iPhone 4s+ and Android 4.3+ with Bluetooth 4.0).
2. On the bike computer, go to 'Sync' and select 'BLE Connect' to enable Bluetooth.
3. Open the CoospoRide app on your phone, turn on Bluetooth, and go to 'Bind your computer'.
4. Select your BC200 model (e.g., BC200-xxxxxxx) to initiate the connection.

[Visual Description: Screens show the process of connecting via USB and Bluetooth, including app pairing steps.]

Specifications

• Display: LCD, 2.4 inch
• Connectivity: USB / Bluetooth (APP)
• Wireless: Bluetooth & ANT+
• Battery Type: 1300 mAh
• Self-Defined Display: 5 pages
• Dimensions: 60 x 88 x 20 mm
• Waterproof: IP67
• Storage Format: .fit File
• Backlight: Yes
• Parameters Displayed Each Page: 2~9
• Language: Spanish/Russian, German/Portuguese, French/Turkish/English
• GPS: GPS & BDS & Glonass
• Laps Count: 70+
• Zone Alert: Yes
• Battery Life: Up to 36 hours continuous use

Attentions and Disclaimer

Attentions:

• Supported ANT+ & BLE Devices: Heart Rate Monitor ❤️, Speed Sensor ?, Cadence Sensor ?, Speed & Cadence 2-in-1 Sensor ??, Power Meter ⚡.

Disclaimer:

The information contained in this manual is for reference only. The product described may be subject to alteration due to the manufacturer's ongoing research and development plans without prior notice.

COOSPO shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product.