Instruction Manual

Package Contents

1. Display unit with tabletop stand
2. Power adapter
3. Instruction Manual

This product requires an AcuRite 5-in-1 Weather Sensor (sold separately) to be operational.

Product Registration & Warranty

IMPORTANT: PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

Register online to receive 1 year warranty protection. Visit www.AcuRite.com

For support, visit the Support Forum, Archived Products, or Register a Product.

Questions?

Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Features & Benefits - Display Unit

The AcuRite 5-in-1 Weather Sensor Display Unit provides comprehensive weather data at a glance. The front of the unit features a clear display with various indicators and controls.

Display Layout Overview:

• Compass Rose: Indicates wind direction (N, NE, E, SE, S, SW, W, NW).
• Outdoor Temperature: Displays current outdoor temperature (e.g., 49°F). Includes an arrow icon indicating temperature trend (⬆️ for rising, ⬇️ for falling).
• Indoor Temperature: Displays current indoor temperature (e.g., 70°F).
• Wind Speed: Shows current wind speed (e.g., 12 MPH) and peak wind speed from the last 60 minutes.
• Outdoor Humidity: Displays current outdoor humidity (e.g., 38%). Includes an arrow icon indicating humidity trend.
• Indoor Humidity: Displays current indoor humidity (e.g., 27%).
• Date and Time: Shows current date (e.g., 10/25/15) and time (e.g., 12:35 PM).
• Weather Select: Allows selection of displayed data like heat index, dew point, wind chill, feels like temperature, days with rain this month, and days since last recorded rainfall.
• Wind Chill: Displays calculated wind chill temperature (e.g., 43°F).
• Rainfall: Shows current rainfall data, including today's rainfall (e.g., 1.24 in.) and previous events.
• Barometric Pressure: Displays current barometric pressure (e.g., 29.07 inHg) with an arrow icon indicating trend (falling, steady, or rising).
• Forecast Icons: Visual representations for weather forecast (e.g., Stormy & Windy, Snow Likely, Cloudy).
• Learning Mode Icon: Appears during the initial 14-day self-calibration period.
• Low Battery Indicators: For both the display unit and the 5-in-1 sensor.
• Sensor Signal Strength: Indicates the strength of the connection to the 5-in-1 sensor.
• Other Indicators: Rainfall Alert Indicator, Storm Alert Indicator, AUTO DIM Indicator.

Control Buttons:

• SELECT Button: To change the WEATHER SELECT category data being displayed.
• SET Button: To enter SET MODE for adjusting time, date, units, and preferences.
• RAINFALL Button: To cycle through rainfall data (Month, Year, All-Time).
• Navigation Buttons (∧, V, SET): Used for adjusting values and saving settings during SET MODE.

Back of Display Unit

The back of the display unit houses connections and battery compartment.

• Integrated Hang Hole: For easy wall mounting.
• Backlight Button: Controls display brightness. Momentary backlight on battery power, dimmer control when using power adapter.
• Plug-in for Power Adapter: Port for connecting the AC power adapter.
• Removable Tabletop Stand: Allows the unit to stand upright on a surface.
• CLEAR ALL/RESET Button: Press and hold for 10 seconds for a full reset to factory defaults.
• A-B-C Switch: Used to set an ID code that must match the 5-in-1 sensor's A-B-C switch to ensure units synchronize.
• Battery Compartment: Holds 6 AA batteries (optional backup power).

Display Unit Setup

AcuRite recommends high-quality alkaline batteries for optimal performance. Heavy-duty or rechargeable batteries are not recommended.

1. Set the A-B-C Switch

Locate the A-B-C switch inside the battery compartment. Select the same letter (A, B, or C) for both the sensor and the display unit to ensure synchronization.

2. Plug Power Adapter into Electrical Outlet

Connect the AC power adapter to the display unit and a standard electrical outlet.

3. Install or Replace Batteries (Optional Backup)

Insert 6 x AA alkaline batteries into the battery compartment, observing correct polarity (+/-).

IMPORTANT: Batteries serve as a backup power source to preserve records during a power outage. The power adapter is the recommended primary power source for full functionality.

Battery Disposal: Please dispose of old or defective batteries in an environmentally safe way and in accordance with local laws and regulations. Follow battery safety guidelines: clean contacts, remove batteries from unused equipment, promptly remove dead batteries, do not incinerate or dispose of in fire, do not mix old/new or different battery types, do not use rechargeable batteries, do not recharge non-rechargeable batteries, and do not short-circuit terminals.

Set the Time, Date & Units

Press the "SET" button to enter SET MODE. The item to be set will blink. Use the ∧ or V buttons to adjust the value and press "SET" again to move to the next preference. Press and HOLD ∧ or V for fast adjustment.

Preference Set Order:

• TOP DISPLAY: Clock Hour, Clock Minute, Calendar Month, Calendar Date, Calendar Year, Temperature Units (°F or °C), Wind Speed Units (MPH, KPH, Knots), Rainfall Units (in or mm), Pressure Units (inHg or hPa).
• TICKER DISPLAY: Language (English, French, Spanish), Weather Ticker Speed (SLOW, MEDIUM, FAST).

SET MODE exits automatically after 20 seconds of inactivity.

Display Backlight Settings

The display offers three brightness settings: High (100%), Medium (60%), and Low (30%).

• Battery Power: Press the "BACKLIGHT" button for a momentary 10-second backlight.
• Power Adapter: Backlight remains on at 100%. Press "BACKLIGHT" to cycle through 60%, 30%, and "AUTO DIM" mode.

AUTO DIM MODE: Automatically adjusts brightness based on time of day & year.

• March 11 - November 4: 100% brightness (6:00 AM - 9:00 PM), 30% brightness (9:01 PM - 5:59 AM).
• November 5 - March 10: 100% brightness (7:30 AM - 7:00 PM), 30% brightness (7:01 PM - 7:29 AM).

OPERATION

Placement for Maximum Accuracy

Proper placement of both the display unit and the 5-in-1 sensor is critical for accurate readings. Place the display unit in a dry area, away from direct sunlight, heat sources, or vents. The sensor should also be placed away from moisture sources and mounted at least 5 ft off the ground.

Using the Professional Weather Center

Learning Mode

The Self-Calibrating Forecasting feature uses a unique algorithm to analyze pressure changes over time, determining your altitude. The "Learning Mode" icon disappears after 14 days, indicating the unit is tuned to your location for accurate weather prediction.

Weather Forecast

AcuRite's patented Self-Calibrating Forecasting provides a 12-to-24 hour personal forecast by collecting data from the 5-in-1 sensor. It offers pinpoint accuracy personalized to your exact location.

Forecast Icons:

• Stormy & Windy: ⛈️ (flashing = stormy)
• Snow Likely: ❄️
• Snow / Rain Mix Likely: ?️
• Chance of Rain: ?️
• Cloudy: ☁️

View the complete list of icons at www.AcuRite.com/acurite-icons.

Weather Select

This feature displays various data points including wind chill, dew point, heat index, "feels like" temperature, days with rain this month, and days since last recorded rainfall. Press the "SELECT" button to cycle through these categories.

Barometric Pressure

Subtle variations in barometric pressure significantly affect weather. The display unit shows current pressure with an arrow icon indicating the trend: FALLING ⬇️, STEADY ➡️, or RISING ⬆️.

Rainfall Tracking

This weather station tracks historical rainfall data for today, year, month, and all-time events. Press the "RAINFALL" button to review records. An icon ?️ is shown while viewing historical data.

Records are displayed in the following order:

• Previous Rainfall #1, #2, #3
• Current Month Total Rainfall
• Previous Month Total Rainfall
• 2 Months Ago Total Rainfall
• Current Year Total Rainfall
• Previous Year Total Rainfall
• All-Time Total Rainfall (date shown is the start date of the total or when the display was powered on)

*Previous rainfall refers to the amount recorded from 12:00 AM to 11:59 PM on the date shown.

Weather Ticker™

The Weather Ticker automatically scrolls real-time weather information and alerts across the lower part of the display unit screen. Possible messages include:

• HEAT INDEX-XX
• WINDCHILL-XX
• DEW POINT-XX
• IT FEELS LIKE XX OUTSIDE
• 7 DAY HIGH TEMP. XX- MM/DD
• 7 DAY LOW TEMP. XX- MM/DD
• 30 DAY HIGH TEMP. XX- MM/DD
• 30 DAY LOW TEMP. XX- MM/DD
• ALL TIME HIGH TEMP. XXX...RECORDED MM/DD/YY
• ALL TIME LOW TEMP. XXX...RECORDED MM/DD/YY
• 24 HOUR TEMP. CHANGE +XX
• ALL TIME HIGH WIND XX MPH...RECORDED MM/DD/YY
• 7 DAY AVERAGE WIND XX MPH
• TODAY'S AVERAGE WIND XX MPH
• MOON PHASES (NEW, WAXING CRESCENT, FIRST QUARTER, WAXING GIBBOUS, FULL, WANING GIBBOUS, LAST QUARTER, WANING CRESCENT)
• INDOOR HUMIDITY OK / HIGH / LOW
• NEW LOW TEMP. RECORD XX
• NEW HIGH TEMP. RECORD XX
• NEW WIND RECORD TODAY XX
• CURRENT RAINFALL X.XX/HR.
• RAIN EVENT STARTED XX HRS. AGO
• SENSOR BATTERIES LOW ?
• DISPLAY BATTERIES LOW ?
• SENSOR SIGNAL LOST...CHECK BATTERIES AND PLACEMENT
• CAUTION- HEAT INDEX IS XXX
• CAUTION- WIND CHILL IS XXX
• CALIBRATION

Troubleshooting

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Avoid caustic cleaners or abrasives. Keep away from dust, dirt, and moisture. Clean ventilation ports regularly with a gentle puff of air.

Calibration

Indoor/outdoor temperature, humidity, and barometric pressure readings can be calibrated on the display unit for improved accuracy, especially when sensor placement or environmental factors affect data.

1. To access calibration mode, press and HOLD the ∧, SET, and V buttons simultaneously for at least 5 seconds.
2. The selected item will flash. Press and release the ∧ or V buttons to adjust the value higher or lower.
3. Press and release the SET button to save adjustments and move to the next preference. A "c" icon will appear next to calibrated values.

Preference Set Order for Calibration:

• OUTDOOR TEMPERATURE
• OUTDOOR HUMIDITY
• INDOOR TEMPERATURE
• INDOOR HUMIDITY
• BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

*To switch between AUTO and MANUAL pressure modes, press and HOLD the "SET" button for at least 10 seconds. The display will show the current mode selected.

The display will save adjustments and exit calibration mode after 20 seconds of inactivity. Calibrations are erased if the display is reset or if batteries are removed and the power adapter is unplugged.

Calibrate the Rain Gauge

The rain gauge on the 5-in-1 sensor can be calibrated for accuracy.

Items Needed: 5-in-1 sensor, display unit, plastic cup, pin, screwdriver.

1. Ensure the 5-in-1 sensor is perfectly level using its built-in bubble level.
2. Place the display unit nearby for monitoring during calibration.
3. Make a pinhole in the bottom of a plastic cup. Hold the cup over the rain gauge and fill it with exactly 1 cup (8oz) of water, allowing it to drip into the gauge. You should hear the internal buckets tip and see water drain.
4. A few seconds after each bucket tip, the display unit should register rainfall in approximately 0.01" increments.
5. The cup of water should take more than 20 minutes to empty for accurate calibration. Simulate a normal steady rainfall. When empty, the display unit should register 1.06".

Tips:

• There should be approximately 25 water drops between bucket tips. If not, adjust the calibration screws on the bottom of the 5-in-1 sensor until the number of drops is equal. Then, restart the calibration procedure.
• If you don't hear the buckets tipping or see water dripping alternately from drains, there may be an issue with the rain gauge or its adjustment. See Troubleshooting on page 15.

Adjustment:

If the rain gauge doesn't register close to 1.06", make an EQUAL adjustment to the two calibration screws on the bottom of the 5-in-1 sensor. Turning screws clockwise increases rainfall; counter-clockwise decreases rainfall.

• To adjust rainfall by 2%, turn both screws 1/8 of a turn.
• To adjust rainfall by 4%, turn both screws 1/4 of a turn.
• To adjust rainfall by 8%, turn both screws 1/2 of a turn.

Specifications

If your AcuRite product does not operate properly, visit www.AcuRite.com or call (877) 221-1252 for assistance.

For more information, visit our Knowledge Base at http://www.AcuRite.com/kbase.

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1. This device may NOT cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference received, including interference that may cause undesired operation of the device.

Customer Support

AcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:

• Phone: (877) 221-1252
• Email: info@chaney-inst.com

24/7 support at www.AcuRite.com:

• Installation Videos
• Register your Product
• Instruction Manuals
• Support User Forum
• Replacement Parts
• Submit Feedback & Ideas

Limited One Year Warranty

IMPORTANT: PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

Register online to receive 1 year warranty protection. Visit www.AcuRite.com

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.

We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.

Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney's products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For in-warranty claims:

Chaney Instrument Co. | 965 Wells St. | Lake Geneva, WI 53147

Product Overview

AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. This manual covers the AcuRite 06016RM Display for the 5-in-1 Weather Sensor.

Other AcuRite products include:

• Weather Stations
• Temperature & Humidity Monitors
• Weather Alert Radios
• Kitchen Thermometers & Timers
• Clocks

Visit www.AcuRite.com for more information.