Steinbach 040912 Mechanical Seal
Product identifier: 040912
Product Description
This document provides the technical specifications for the Steinbach 040912 mechanical seal, a component commonly used in pool pump systems. The seal is designed for specific operational requirements and its dimensions are critical for proper installation and function.
Technical Specifications and Dimensions
The following dimensions are provided for the Steinbach 040912 mechanical seal. All measurements are in millimeters (mm).
Upper Seal Component
- Outer Diameter (Spring Housing):
- Ø 45,46 mm
- Inner Diameter (Shaft Fit):
- Ø 24,38 mm
- Spring Diameter (Outer):
- Ø 35,88 mm
- Spring Height/Width:
- 21,08 mm
- Overall Height (Upper Part):
- 11,34 mm
Lower Seal Component (Face)
- Outer Diameter (Housing):
- Ø 35,52 mm
- Inner Diameter (Shaft Fit):
- Ø 21,14 mm
- Face Width/Height:
- 5,16 mm
Manufacturing Tolerances
The specified values are subject to production-related tolerances and may deviate in the single-digit percentage range.
