Edifier M60 Multimedia Speaker Manual
1. EDIFIER ConneX App
The EDIFIER ConneX app enhances your speaker experience, allowing you to:
- Switch input modes
- Control playback
- Select or customize EQs
- Upgrade firmware
- Access more functions
Download the EDIFIER ConneX App:
Scan the QR code on the quick start guide or packaging with your smart device. Alternatively, search for "EDIFIER ConneX" in the Apple App Store (for iOS devices) or Google Play (for Android devices).
How to Use the App:
- Connect your smart device to the speaker via Bluetooth.
- In Bluetooth mode, open the EDIFIER ConneX App on your smart device.
- Tap the menu for settings and playback control.
Note: The Bluetooth Low Energy (BLE) connection between your smart device and the speaker remains active even when the speaker is switched to non-Bluetooth input modes.
2. What's in the Box
The package includes:
- Passive speaker
- Active speaker
- Power cable
- Speaker connecting cable
- Speaker stands
- 3.5mm to 3.5mm audio cable
- 3.5mm to RCA audio cable
- USB-C to USB-C cable
- Quick start guide
Important Safety Instructions: Images are for illustrative purposes only and may differ from the actual product. The bundled USB connecting cable is for audio streaming only; do not use it for device charging. Information and specifications are subject to change due to technical improvements.
3. Cable Connection
Connect the speaker using the provided cables. The power input is 100-240V~ 50/60Hz 400mA.
Typical connections include:
- Connecting to a TV, MP3 player, or CD player using audio cables (3.5mm or RCA).
- Connecting to a computer via USB-C for audio streaming.
4. Standby & Wake-up
To switch the speaker to standby mode or work mode, tap and hold the [Power Button] on the speaker for approximately 1.5 seconds.
5. Source Selection
Briefly tap the [Power Button] on the speaker to cycle through the available input sources, such as USB IN and AUX IN.
6. Bluetooth Connection
To connect via Bluetooth:
- Ensure your smart device's Bluetooth is enabled.
- On your device, search for available Bluetooth devices and select "EDIFIER M60".
- If prompted, enter the PIN code "0000".
Note: For full Bluetooth functionality, ensure your audio source device supports A2DP and AVRCP profiles. If no device is connected for 10 minutes, the speaker enters a hidden mode (indicated by a breathing pattern on the [Power Button] backlight). In this mode, new devices cannot discover the speaker, but previously paired devices can reconnect by selecting "EDIFIER M60" from their Bluetooth list. To exit hidden mode, tap the [Power Button]. To disconnect from the current Bluetooth device, tap and hold the [Power Button] and the [Volume Down Button] for 1.5 seconds.
7. USB Connection
Connect the speaker to your computer using the USB-C cable for audio streaming. This feature is supported on the following operating systems: Windows 11, Windows 10, Windows 8, and Windows 7.
8. Play Control
Use the controls on the speaker to manage playback:
- Volume: Use the [Volume Up Button] (+) and [Volume Down Button] (-) to adjust the volume.
- Playback: Use the [Play/Pause Button] (||), [Previous Track Button] (<<), and [Next Track Button] (>>) for playback control.
In AUX and USB modes, volume synchronization with your device is not supported. Adjust the volume separately on the speaker and your connected device.
9. Specifications
Total Output Power (RMS):
- L/R (Treble): 15W+15W
- L/R (Mid-range and bass): 18W+18W
Frequency Response: 58Hz-40kHz
EU Declaration:
- Frequency Band: 2.402GHz ~ 2.480GHz
- RF Power Output: ≤10 dBm (EIRP)
- There is no restriction of use.
10. Troubleshooting
Cannot connect to your Bluetooth device:
- Ensure the distance between the speaker and your device is less than 10 meters and there are no obstacles.
- Make sure no other device is connected to the speaker via Bluetooth.
- Ensure the speaker is in Bluetooth pairing mode. If not, manually switch to pairing mode.
- Restart both the speaker and your Bluetooth device, then try again.
No power:
- Ensure the power cable is properly connected to the speaker and the power outlet.
- Verify that the power supply is active.
No sound:
- Ensure the speaker is powered on.
- Check that the speaker and your audio device are properly connected.
- Verify that playback is not paused.
- Ensure neither the speaker nor your device is muted.
- Increase the volume on both the speaker and your device.
Noise coming from speakers:
- Edifier speakers are designed for low noise. If you experience excessive background noise, it may be from your audio source device.
- Try unplugging the audio cables and turning the volume up. If no sound is audible at 1 meter from the speaker, the speaker itself is functioning correctly.
Contact and Warranty Information
For more information about EDIFIER products, please visit www.edifier.com.
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled "Warranty Terms".
Contact Details:
- USA and Canada: service@edifier.ca
- South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.
