1/4" MINI AIR REGULATOR
MODEL NO: CAT157
PART NO: 3120171
USER INSTRUCTIONS
GC0122 - Rev 1
INTRODUCTION
Thank you for purchasing this CLARKE product. Before attempting to use this product, please read this document thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
INSTALLATION
The regulator should ideally be connected to a fixed airline or connected to the outlet of the compressor. An arrow, moulded under the body of the unit, indicates the direction in which the air should flow. Use the mounting bracket supplied whenever possible. The maximum supply pressure the unit can operate is 145psi (10bar). IMPORTANT: Remember that the sequence for airline component assembly is: FILTER/REGULATOR/LUBRICATOR.
ADJUSTING THE AIR PRESSURE
To adjust the delivery air pressure, pull the regulator cap upwards and twist clockwise to increase/anti-clockwise to decrease the outlet pressure. The outlet pressure is displayed by the gauge. When the pressure is correct, press the cap back to lock and retain the setting.
A visual representation of the air regulator shows a 'Regulator cap' on top, a 'Shut-off valve' on the side, an 'Air outlet' port, an 'Air inlet' port, and a pressure gauge displaying readings in 'psi' and 'bar'. The gauge has markings from 0 to 230 psi (0-16 bar).
OPERATING THE SHUT-OFF VALVE
The unit can be isolated from the air supply by screwing down the shut off valve on the inlet side of the unit. To restore airflow, unscrew the valve no more than 3 full turns from the fully closed position.
⚠️ CAUTION: AIRFLOW WILL BE RESTORED AFTER 3 FULL TURNS. NEVER UNSCREW THE VALVE ANY MORE THAN 3 FULL TURNS FROM THE FULLY CLOSED POSITION.
This product has no user serviceable parts.
SPECIFICATION
Feature | Value |
---|---|
Weight | 0.228 kg |
Length x Width x Height | 98 x 68 x 80 |
Maximum supply pressure | 143psi (10 bar) |
Maximum outlet pressure | 115psi (8 bar) |
Outlet port size | 2 x 1/4″ BSP |
Gauge range | 0-230psi (0-16bar) |
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
ENVIRONMENTAL PROTECTION POLICY
Do not dispose of airline products with general household waste at the end of its life. This product contains valuable raw materials and should be disposed of appropriately at a recognized disposal facility.