StarTech.com 120B-USBC-MULTIPORT USB-C Multiport Adapter Quick Start Guide

Product Diagram (Page A)

The diagram illustrates the layout of the USB-C Multiport Adapter. Key components are numbered for reference:

1: Integrated USB-C Host Cable
2: Two HDMI Output Ports
3: MicroSD Card Reader
4: SD Card Reader
5: USB-A Data/Charging Port
6: USB-A Data Port
7: Gigabit Ethernet Port
8: USB-C 100W Power Delivery Port

Components and Functions

Component	Function
1. Integrated USB-C Host Cable	Connect to a USB-C port on a host computer. Supports USB 3.1 Gen 2 (10Gbps), DisplayPort 1.4, and Power Delivery 3.0 Specification.
2. 2 x HDMI Outputs	Connect up to two HDMI displays. Supports HDMI 2.0. Uses MST over DisplayPort 1.4.
3. MicroSD Card Reader	Micro Secure Digital (microSD) 4.0 UHS-II, microSD 3.0, 2.0, 1.1, and 1.0 compatible. Insert a microSD card with the label side facing up into the microSD card slot. The host computer's operating system will automatically detect the card and install the necessary driver software.
4. SD Card Reader	Secure Digital (SD) 4.0 UHS-II, SD 3.0, 2.0, 1.1, and 1.0 compatibility. Insert an SD card with the label side facing up into the SD card slot. The host computer's operating system will automatically detect the card and install the necessary driver software.
5. USB-A Data/Charging Port	Connect and/or charge a USB-A peripheral device. Supports USB 3.1 Gen 1 (5Gbps). Supports BC1.2 5V/1.5A (7.5W) charging (USB-C power adapter required).
6. USB-A Data Port	Connect a USB-A peripheral device. Supports USB 3.1 Gen 1 (5Gbps).
7. Gb Ethernet Port	Connect a CAT 5e/CAT 6 cable to establish a network connection. Supports 10/100/1000Mbps.
8. USB-C 100W Power Delivery Port	Connect a USB-C power adapter for USB Power Delivery 3.0 (up to 100 W).

Requirements

For the latest requirements, visit www.StarTech.com/de-de/120B-USBC-MULTIPORT.

Find manuals, FAQs, videos, drivers, downloads, technical drawings, and more at www.startech.com/de-de/support.

Manual Revision: November 12, 2021 4:56 PM

Setup Guide

Page A Ports

Connect the Multiport Adapter's integrated USB-C Host Cable to a USB-C port on your host computer. Your computer will automatically detect the device and install all required drivers.
Connect an HDMI cable from up to two HDMI-enabled displays to the Multiport Adapter's HDMI output ports to add additional HDMI displays to your workstation.
- Note: This Multiport Adapter uses DisplayPort 1.4 with MST to achieve dual-display functionality.
- Your computer's USB-C port must support DP Alt Mode to output video, and DP Alt Mode with MST to output dual video.
- Video performance, such as resolution and refresh rate, depends on your host computer's video controller and support for DisplayPort 1.4 (DSC).
Insert your memory card into the microSD card reader. Your computer will detect the card and mount it as a drive. To remove the memory card, pull the card out.
Insert your memory card into the SD card reader. Your computer will detect the card and mount it as a drive. To remove the memory card, push the card in and then pull it out.
- Note: To protect your memory card and the data stored on it, it is important to safely eject the card from your computer's operating system before removing it from the Multiport Adapter.

Page B Ports

Connect a USB-A cable from your USB peripheral device to the Multiport Adapter's USB-A Data/Charging Port to connect the device to your computer and/or charge your device with up to 5V/1.5A (7.5W).
- Note: A USB-C power adapter must be connected to the Multiport Adapter's USB-C 100W Power Delivery Port to charge connected peripherals.
- If no power adapter is connected, the USB port will provide up to 4.5W of available bus power.
Connect a USB-A cable from your USB peripheral device to the Multiport Adapter's USB-A Data Port to connect the device to your computer.
Connect a CAT 5e/CAT 6 cable from your local network (e.g., router, switch, modem, etc.) to the Multiport Adapter's Gb Ethernet Port to access your network via a wired LAN connection.

Page C Ports

(Optional) Connect a USB-C power adapter (up to 100W) to the Multiport Adapter's USB-C 100W Power Delivery Port to charge the computer connected via the integrated USB-C Host Cable.
- Note: The Multiport Adapter has a 15W power reserve, leaving up to 85W available for charging your computer.
- If no USB-C power adapter is connected, the USB-A Data/Charging Port cannot be used for powering and charging connected peripherals.

Environmental Information

FR This device is recyclable. [Deposit at store] OR [Deposit at recycling center]. Collection points at www.quefairedemesdechets.fr

	StarTech.com USB-C Multiport Adapter - HDMI & VGA - 3x USB - SD/uSD - GbE - 100W Quick Start Guide This guide provides essential information for the StarTech.com DKT30CHVSDPD USB-C Multiport Adapter, covering its features, port layout, power delivery capabilities, and operational details for connecting to laptops and peripherals.
	StarTech.com 102B-USBC-MULTIPORT Quick-Start Guide: USB-C DP 1.4 Adapter Quick-start guide for the StarTech.com 102B-USBC-MULTIPORT USB-C DP 1.4 Multiport Adapter, detailing its features, ports, installation, and requirements for dual 4K 60Hz HDMI, USB 3.2 Gen 2, GbE, and SD card reader.
	StarTech.com 103B-USBC-MULTIPORT: 4K 60Hz USB-C Docking Station with 100W PD Enhance your workstation with the StarTech.com 103B-USBC-MULTIPORT, a 5-in-1 USB-C docking station offering 4K 60Hz HDMI, dual 5Gbps USB-A ports, Gigabit Ethernet, and 100W Power Delivery pass-through for laptops. WWCB certified for Chromebooks.
	StarTech.com DKT30CHVAUSP USB-C Mini Travel Dock: 4K HDMI/VGA, 3x USB 3.0, GbE, PD Comprehensive data sheet for the StarTech.com DKT30CHVAUSP USB-C multiport adapter. Features 4K HDMI or 1080p VGA, 3x USB 3.0 ports, Gigabit Ethernet, SD card reader, 3.5mm audio, and 100W Power Delivery pass-through for laptops and tablets.
	StarTech.com USB-C Docking Station with Dual 4K 60Hz HDMI, 10Gbps USB Hub, 100W PD Enhance your workspace with the StarTech.com USB-C docking station, offering dual 4K 60Hz HDMI, 10Gbps USB-A/USB-C ports, 100W Power Delivery, Gigabit Ethernet, and an SD card reader. Ideal for MacBook Pro, Windows, and other USB-C laptops.
	StarTech.com USB-C Multiport Adapters: Features and Specifications Compare StarTech.com USB-C multiport adapters, including USB-C 3.2 Gen 2 10Gbps and Gen 1 5Gbps models. View features like display support, resolution, USB ports, fast charge, and PD pass-through.
	StarTech.com 6-in-1 USB-C Multiport Adapter with 4K 60Hz HDMI, 3x USB-A, GbE Expand your USB-C laptop's connectivity with this 6-in-1 multiport adapter. Features 4K 60Hz HDMI, three USB-A 3.2 Gen 1 ports (5Gbps), Gigabit Ethernet, and 100W Power Delivery pass-through. Ideal for travel and creating a workstation anywhere.
	StarTech.com 167B-USBC-MULTIPORT USB-C Docking Station with Dual HDMI Enhance productivity with the StarTech.com 167B-USBC-MULTIPORT USB-C docking station. Features dual HDMI outputs (4K30Hz, 1080p60Hz), a 3-port USB-A 5Gbps hub, and USB-C/USB-A host compatibility. Includes a 40cm cable and supports Windows, macOS, and ChromeOS.

StarTech.com USB-C Multiport Adapter