SOUNDPEATS Air3 User Guide
Product Overview
The SOUNDPEATS Air3 are wireless earbuds designed for an immersive audio experience. This guide provides instructions on pairing, usage, and technical specifications.
Pairing
- Open the charging case lid while the case has enough power. Press and hold the button on the charging case for 3 seconds until the white light flashes. Both earbuds will turn on and enter pairing mode.
- Activate Bluetooth on your device and select "SOUNDPEATS Air3" to connect.
Reset
- Place both earbuds back into the charging case. The white light on the charging case flashes twice, and the earbuds begin charging.
- With the case lid open, press and hold the charging case button for 10 seconds until the white light flashes twice. Reset is complete.
- Close the case lid and reopen it to activate the earbuds.
Touch Control
| Function | Control |
|---|---|
| Power On | Auto: Open up the case lid Manually: Press and hold the MFB for 1.5s |
| Power Off | Auto: Place back into charging case and close the lid Manually: Press and hold the MFB for 10s |
| Play/Pause | Auto: Take off either earbud to pause music. Wear either earbud or both together to play music. Manually: Double tap the MFB |
| Volume - | Single tap the left MFB |
| Volume + | Single tap the right MFB |
| Previous Track | Press and hold the left MFB for 1.5s |
| Next Track | Press and hold the right MFB for 1.5s |
| Answer/Hang Up Phone Call | Double tap the MFB |
| Reject Phone Call | Press and hold the MFB for 1.5s |
| Switch Between Two Calls | Press and hold the charging case button for 3s |
| Manually Enter Pairing Mode | Triple tap the right MFB |
| Activate Voice Assistant | Triple tap the left MFB |
| Enter/Exit Game Mode | Triple tap the left MFB |
SOUNDPEATS Air3 utilizes advanced technology for low latency in game mode, ensuring audio synchronization with visuals. Triple tap the left earbud to activate "Game Mode" with a voice prompt, and triple tap again to "Exit Game Mode".
Wearing
Diagrams show correct and incorrect earbud placement for optimal fit and sound.
Product Diagram
A visual representation of the earbuds and charging case components.
Q&A
Q1: What does the indicator on the charging case tell?
It shows the battery power left in the charging case.
- Charging Case Indicator: Green (50% - 100%), Yellow (10% - 49%), Red (10% or less). The indicator flashes slowly while charging the case.
- Charging Case Indicator Battery Power: Red (0-19%), Yellow (20%-69%), Green (70%-99%), Green LED stays on (100%).
Q2: How to charge the charging case?
- Use a Type-C adapter (current no more than 1A) to charge the case. The indicator flashes while charging.
- Charge the earbuds and charging case at least once every 3 months when not in use for an extended period.
Q3: Why are the earbuds still connected to my phone after placing them back and closing the case lid?
- The charging case has no remaining power. The case cannot turn off the earbuds if the case battery is depleted.
- Ensure the earbuds are correctly placed in the charging case and that the contact points on both the case and earbuds are clean. Clean with a microfiber cloth if necessary.
Q4: Why is the playtime not as described?
A single charge provides approximately 5 hours of playtime. The charging case offers an additional 2.5 recharges, for a total of up to 17.5 hours of playtime.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Specification
- Manufacturer: Soundpeats
- Model: Air3
- Bluetooth version: 5.2
- Bluetooth profiles: HSP, HFP, A2DP, AVRCP
- Chipset: Qualcomm QCC3040
- Supported Bluetooth codecs: SBC, aptX, aptX-Adaptive
- Wireless range: Up to 10 m
- Case battery capacity: 220 mAh
- Rechargeable battery capacity of headphones: 30 ±2 mAh
- Charging time of headphones: Approx. 1.5 h
- Charging time of case: Approx. 1.5 h
- Charging port: USB-C
- Operating time: Approx. 17.5 h
- Water resistance class: IPX5
- Control type: Touchscreen
- Weight of case with earphones: 33 g
- Weight of single earphone: 4 g
- Operating frequency: 2402-2480 MHz
- Maximum radio frequency power: <12dBm
