Installation and Operation Manual

Handle Direction of Right-Handed Door

This section details the correct handle orientation for right-handed doors and provides instructions for adjusting the front handle direction.

Right-Handed Door Handle Direction:

The diagram illustrates the proper placement of the front and rear panels for a right-handed door. A triangular mark labeled "R" indicates the right-handed configuration.

Front Handle Direction Change Diagram:

To change the front handle direction: Loosen the screw located in the inner hole using a Phillips head screwdriver. Remove the handle, rotate it to align with the door's opening direction, then reinsert and secure the screw.

Lock Body Installation and Direction Adjustment

Instructions for adjusting the lock body's left and right orientation and installing the front panel components.

Change Left and Right Directions for Lock Body:

1. Reverse the lock body, ensuring the latch bolt faces downwards.
2. Lower the latch bolt limit block.
3. Press the latch bolt into the lock body by hand and rotate it 180 degrees.
4. Release the latch bolt; it should extend into the latch bolt hole.

Install Front Panel Square Shaft:

Installation Method: Press the square shaft pin with your finger, align it with the corresponding hole on the handle, and insert it. The pin will click into place, preventing detachment.

Install Lock Body:

Installation Method: Ensure the latch bolt is oriented upwards, matching the internal and external door directions. Install the lock body onto the door frame and secure it with screws. Align the lock head's keyhole with the front panel and fix it with screws.

Install Front Panel Components:

The front panel assembly includes:

• Rubber pad
• Rear cover
• Front panel assembly
• Screw tube
• Square shaft
• Power plug
• Front panel fixing screw

Install Lock Body (Continued):

Installation Method: Connect the power cables from the front and rear panels. Insert the square shaft into the handle's inner hole. Evenly place the rubber pad around the rear panel assembly, secure it with screws, and install the battery and battery cover.

Components involved include the rear panel assembly, power cable, square shaft, and rear panel fixing screw.

Installation Exploded View:

An exploded view diagram shows how all the lock components fit together during installation.

Product Advantages and Features

The smart door lock offers multiple convenient and secure access methods, along with intelligent features.

• Access via fingerprint, card, and password.
• Intelligent voice menu navigation and user-friendly interface.
• Various door opening modes enhance security.
• Account management for adding and deleting users is number-based.
• Prevents password peeping.
• Electronic back lock function ensures only administrators can unlock after the door is re-locked.
• Includes a startup self-test function.
• Supports temporary password generation via WeChat Mini Program.
• Utilizes high-quality components from international brands for stability and reliability.
• Waterproof, moisture-proof, and mildew-proof modules.
• Modules are tested for high/low temperature, vibration, and aging to adapt to harsh environments.

Technical Parameters

Key specifications for the smart door lock are detailed below:

Function and Operation

This section outlines the initialization, menu navigation, and user management procedures.

1. Initialization

Under initialization state, you can open the door using any registered fingerprint, password, or magnetic card. To restore the lock to its initial state, press the initialization key on the rear setting panel for 5 seconds.

2. Enter Menu

2.1 Initialization State: Light up the keyboard and press the "*#" key to enter the menu.

2.2 Non-Initialization State: Light up the keyboard, press the "*#" key, input the registered administrator information as prompted, and then set the menu.

Note: Press "*" to return to the previous page, and press "#" to exit and confirm.

3. Administrator Setting

3.1 Input Administrator:

Press "*#" to enter the menu. Follow the voice prompts: Select "1. Create user". You will hear confirmation, then input the administrator's password, fingerprint, or card. The administrator is assigned user number 00. Multiple fingerprints/passwords/cards can be registered under user 00.

3.2 Delete Administrator:

Press the rear setting key for 5 seconds to restore factory settings, which effectively removes administrator privileges.

4. Common User Setting

4.1 Input Common User:

Press "*#" to enter the menu. Select "1. Create user". Upon confirmation, input the common user's password, fingerprint, or card. Common users are assigned numbers starting from 01.

4.2 Delete Common User:

Press "*#" to enter the menu. Select "2. Delete user". You will be prompted to input the user number to be deleted (e.g., 01). After inputting the number, you will hear "operate successfully".

System Setting

Configure various system parameters including time, volume, verification modes, and language.

5.1 Time Setting

To set the time: Press "*#" to enter the menu, navigate to "3. System setting", then select "1. Time setting". You will be prompted to input the date (YYMMDD) and time (HHMM). Note that the time must be entered in 24-hour format.

5.2 Volume Adjustment

To adjust volume: Press "*#" to enter the menu, navigate to "3. System setting", then select "2. Volume adjustment".

5.3 Unlock Mode

A. Verification Mode:

To set the verification mode: Press "*#" to enter the menu, navigate to "3. System setting", then select "3. Verification mode". Choose between "1. Single verification unlocking" or "2. Double verification unlocking" as needed.

5.4 Language Setting

To change the language: Press "*#" to enter the menu, navigate to "3. System setting", then select "4. Language setting". Choose between "1. Chinese" or "2. English".

Pick-proof Setting

Activate or deactivate the pick-proof feature for enhanced security.

Instructions: Press shortcut key "4#" to enter the menu setting. You will be prompted to input the administrator password. Select "1. Turn on pick-proof" or "2. Turn off pick-proof" as required.

WeChat Mini Program and Network Operations

This section covers using the WeChat Mini Program for temporary passwords and network configuration.

7. WeChat Mini Program

Steps:

1. Open the WeChat application.
2. Scan the QR code to access the Mini Program.
3. Input the administrator password.
4. Input the valid time for the temporary password.
5. Once generated, the temporary password can be used to open the door within its validity period.

Notes:

1. The administrator's first set of credentials must be a password, not a fingerprint or card.
2. The time setting must match the mobile phone's time and be in 24-hour format.

Network Operating Instructions

Steps for Network Configuration:

1. Register an administrator (e.g., password: 123456789).
2. On the lock's main panel, input "1#". You will hear a prompt to input the administrator password.
3. Enter "123456789" for administrator authorization.
4. The lock panel will automatically enter the network distribution state.

Shortcut Key Description

• 1#: Enters the network distribution state.
• 2#: Deletes network distribution.
• 3#: Activates the doorbell or requests remote unlock.
• 4#: Enters the pick-proof setting.

APP Integration: Registration, Family Setup, and Device Addition

This section guides users through the mobile application for managing the smart door lock.

Register and Log in to APP

If you do not have an APP account, you can register or log in via a verification code sent by message. Click "Create new account" to proceed to the account registration page, obtain a verification code, and set your password. If you already have an account, click "Log in" to access the APP, which supports login via password, verification code, or account.

[Screenshots depict the registration and login interfaces of the mobile application.]

Create Family

After registration and logging in, you can create a "family". Each account can create or join multiple families. Devices can be grouped by room within the home. It is recommended to pre-configure functions that depend on the home's location, such as weather-related settings.

[Screenshots show the process of creating a family and adding a home within the app.]

Add WiFi Door Lock

To add the WiFi door lock to your app: Navigate to the "my home" option, click the "+" icon in the upper right corner, and select the WiFi door lock from the "security sensor" category. Follow the instructions in the manual and on the app once the device enters network distribution mode.

[Screenshots illustrate the app interface for adding a device, showing the main page and the device addition screen.]

Panel First Page

The main page of the app provides access to features such as remote unlock, message member management, door opening records, and temporary password functions. To unlock the door remotely, initiate a request through the app, which will then prompt whether to open or reject the request on the door lock hardware.

[Screenshot shows the app interface for controlling the smart door lock, including remote unlock functionality.]

Advanced Features: Dynamic Password, Message Center, Member Management, and Unlock Log

Explore advanced functionalities for enhanced control and monitoring.

Dynamic Password

Click the option to generate a dynamic password and quickly copy it for temporary access.

[Screenshot shows the app interface for generating a dynamic password.]

Message Center

The message center aggregates alarm information, doorbell call notifications, and hijacking alarm alerts, providing a centralized view of security events.

[Screenshot displays the app's message center with categories for alarms and notifications.]

Member Management

Add, delete, or modify member access through the member management section. Only the app administrator has the authority to make these changes.

[Screenshot illustrates the member management screen within the app, listing registered users.]

Unlock Log

Review unlock logs, listed in reverse chronological order. If unlock IDs are associated with user names, those names will be displayed directly. Otherwise, specific unlock IDs will be shown.

[Screenshot shows the unlock log interface, detailing access events with timestamps and unlock methods.]

Temporary Password and Anti-Hijacking

Manage temporary access and enhance security with anti-hijacking features.

Temporary Password

Create and delete temporary passwords via the app. After each creation or deletion, the lock hardware requires synchronization with the server. The system supports sending messages for password creation, including both domestic and international messages, provided the owner has sufficient message credit.

[Screenshots show the app interface for managing temporary passwords, including a list of existing passwords and the setup screen.]

Anti-hijacking Icon

When the anti-hijacking icon is activated, if an unlock action occurs while the door is locked, the system will record the event, and the app will trigger an anti-hijacking alarm.

[Screenshot indicates the setting for the anti-hijacking feature.]

Restore Factory Setting

Return the smart lock to its default factory configuration.

To restore factory settings: Click the icon in the upper right corner of the main interface, scroll down the menu, and select "restore factory setting". Alternatively, factory settings can be restored directly on the hardware; refer to the user manual for specific hardware instructions.

[Screenshots display the app's settings menu, highlighting the option to restore factory settings among other device management options.]

X2-3585 Lock Body Opening Diagram

This section provides a detailed technical diagram for the X2-3585 lock body, essential for precise installation.

Diagram Description:

The diagram serves as a template for cutting door openings for the X2-3585 lock body. It includes measurements in millimeters (mm) and is presented at a scale of 1:1. The diagram indicates the "Door center line", "Front and back of door", and "Side of door". An "Arrow up" symbol denotes the upward direction. Key dimensions provided include:

• Lock slot dimensions: 180mm x 19mm, with a depth of 55mm.
• Spindle hole diameter: Ø18.
• Other mounting hole positions and dimensions are detailed, including R12.5 radius cuts and specific measurements for screw placements.
• Measurements are referenced from the door edge and from the ground (100cm).