FCC Compliance Information Statement

FCC Compliance Information Statement

Product Name: Omada Campus 48-Port Gigabit Stackable L3 Managed Switch with 6× 10G Slots

Model Number: SG6654X

Responsible party: TP-Link Systems Inc.

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• 1) This device may not cause harmful interference.
• 2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

TP-Link Systems Inc. has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2025/09/04

CE Mark Warning [CE Logo]

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce

UKCA Mark Warning [UKCA Logo]

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2016.

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

Industry Canada Statement

CAN ICES-003 (A)/NMB-003(A)

Japanese Statement (VCCI)

This is a Class A information technology device. Use in a home environment may cause radio interference, and the user may be required to take appropriate measures.

VCCI-A

BSMI Notice (Taiwan)

Safety Consultation and Precautions

• Use only the original power adapter or the power type specified for this product.
• Before cleaning the product, please unplug the power cord. Do not use liquid or spray cleaners or wet cloths for cleaning.
• Beware of moisture. Do not splash water or other liquids onto the product.
• Ensure ventilation for slots and openings to ensure reliable operation and prevent overheating. Do not block or cover openings.
• Do not place the product near heat sources. Do not place it in a confined space unless there is normal ventilation.
• Do not disassemble or repair the casing yourself. If the product is faulty, please contact the manufacturer or agent.
• To avoid electromagnetic interference, this product should not be installed or used in a residential environment.

Hazardous Substance Declaration (China RoHS)

Declaration of Hazardous Substance Content

Notes:

• Note 1: "Exceeds 0.1 wt %" and "Exceeds 0.01 wt %" refer to the percentage content of the restricted substance exceeding the reference percentage content.
• Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the reference percentage content.
• Note 3: "—" indicates that the restricted substance is excluded.

Eurasian Conformity Mark (EAC)

The product is certified in accordance with the rules of the UkrSEPRO system for compliance with the requirements of normative documents and requirements stipulated by current legislative acts of Ukraine.

Safety Information

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link Systems Inc.
• Place the device with its bottom surface downward.
• Keep the device away from water, fire, humidity or hot environments.
• Plug the product into the wall outlets with earthing connection through the power supply cord.
• The plug on the power supply cord is used as the disconnect device; the socket-outlet shall be easily accessible.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Country-Specific Earthing Instructions:

• In Denmark: "Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til stikproppens jord."
• In Finland: "Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan."
• In Norway: "Apparatet må tilkoples jordet stikkontakt."
• In Sweden: "Apparaten skall anslutas till jordat uttag."

Please read and follow the above safety information when operating the device. TP-Link Systems Inc. cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Product Label Symbol Explanations

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.