FCC Compliance Information Statement
Product Name: Switch
Model Number: SG5428XF
Responsible Party: TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation in a residential area is likely to cause harmful interference, requiring the user to correct it at their own expense.
This device complies with Part 15 of the FCC Rules, subject to the following two conditions:
- 1) This device may not cause harmful interference.
- 2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
TP-Link Systems Inc. has determined that the equipment complies with applicable technical standards, FCC Part 15. No unauthorized changes have been made, and the equipment is properly maintained and operated.
Issue Date: 2025/05/27
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the switch is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
UKCA Mark Warning
TP-Link declares that the switch is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/.
Industry Canada Statement
CAN ICES-003 (A)/NMB-003(A)
French Recycling Information
[French recycling instructions for packaging, batteries, and cords. Suggests repair or donation. Collection points available at www.quefairedemesdechets.fr]
Japanese Statement
This is a Class A information technology device. Use in a domestic environment may cause radio interference, requiring the user to take appropriate measures.
BSMI Notice (Taiwan)
Safety Advice and Precautions:
- Use only the original power adapter or the specified power type for this product.
- Unplug the power cord before cleaning. Do not use liquid or spray cleaners or a damp cloth for cleaning.
- Beware of moisture; do not spill water or other liquids onto the product.
- Slots and openings are for ventilation to ensure reliable operation and prevent overheating; do not block or cover openings.
- Do not place the product near heat sources. Do not place in enclosed spaces without normal ventilation.
- Do not disassemble or repair the product yourself. Contact the manufacturer or agent if there is a malfunction.
- Before connecting the power cord, ensure the socket is equipped with protective grounding.
- To avoid electromagnetic interference, this product should not be installed or used in residential environments.
Limited Substances Table (RoHS Compliance)
| Unit | Pb [Lead symbol] | Cd [Cadmium symbol] | Hg [Mercury symbol] | Cr+6 [Hexavalent Chromium symbol] | PBB [PBB symbol] | PBDE [PBDE symbol] |
|---|---|---|---|---|---|---|
| PCB | ○ | ○ | ○ | ○ | ○ | ○ |
| Outer casing | ○ | ○ | ○ | ○ | ○ | ○ |
| Power supply board | — | — | — | — | — | — |
| Other accessories | ○ | ○ | ○ | ○ | ○ | ○ |
Notes:
- 1. "Exceeds 0.1 wt %" and "Exceeds 0.01 wt %" indicate the percentage content of the limited substance exceeds the reference value.
- 2. "○" indicates the percentage content of the limited substance does not exceed the reference value.
- 3. "—" indicates the limited substance is excluded.
Ukrainian EAC Mark Statement
Product certified according to UkrSEPRO system rules for compliance with requirements of normative documents and legislation of Ukraine. [EAC mark]
Safety Information
- Do not attempt to disassemble, repair, or modify the device. If service is needed, please contact TP-Link Systems Inc.
- Place the device with its bottom surface downward.
- Keep the device away from water, fire, humidity, or hot environments.
- Plug the product into wall outlets with an earthing connection through the power supply cord.
- The plug on the power supply cord serves as the disconnect device; the socket-outlet shall be easily accessible.
- The socket-outlet shall be installed near the equipment and be easily accessible.
- The operating temperature for the device shall be within -5 °C to 45 °C (23 °F to 113 °F).
- Please read and follow the above safety information when operating the device. TP-Link Systems Inc. cannot guarantee that no accidents or damage will occur due to improper use. Please use this product with care and operate at your own risk.
- Before using the power cord to connect this product, ensure that the socket is equipped with protective grounding.
Nordic Safety Instructions Summary: For Denmark, Finland, Norway, and Sweden, it is required to connect the device to an earthed socket or a socket with protective contact.
Caution
⚡ [Shock hazard]
[Disconnect all power sources]
Explanation of Symbols on the Product Label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary by product.
| Symbol | Explanation |
|---|---|
| [Class II equipment symbol] | Class II equipment |
| [Class II equipment with functional earthing symbol] | Class II equipment with functional earthing |
| [Alternating current symbol] | Alternating current |
| [Direct current symbol] | Direct current |
| [Polarity of d.c. power connector symbol] | Polarity of d.c. power connector |
| [For indoor use only symbol] | For indoor use only |
| [Dangerous voltage symbol] | Dangerous voltage |
| [Caution, risk of electric shock symbol] | Caution, risk of electric shock |
| [Energy Efficiency Marking symbol (VI)] | Energy Efficiency Marking |
| [Protective earth symbol] | Protective earth |
| [Earth symbol] | Earth |
| [Frame or chassis symbol] | Frame or chassis |
| [Functional earthing symbol] | Functional earthing |
| [Caution, hot surface symbol] | Caution, hot surface |
| [General caution symbol (!)] | Caution |
| [Operator's manual symbol (i)] | Operator's manual |
| [Stand-by symbol (power button outline)] | Stand-by |
| [ON/OFF symbol (push-push)] | "ON"/"OFF" (push-push) |
| [Fuse symbol] | Fuse |
| [Fuse is used in neutral N symbol] | Fuse is used in neutral N |
RECYCLING
[WEEE recycling symbol] This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
The user has the choice to give their product to a competent recycling organization or to the retailer when buying new electrical or electronic equipment.
? [Caution: avoid listening at high volume levels for long periods]
[Disconnection symbol, all power plugs]
[Mini-gap switch symbol] Switch of mini-gap construction
[Micro-gap switch symbol (US)] Switch of micro-gap construction (for US version)
[Micro-gap/Micro-disconnection switch symbol (Other)] Switch of micro-gap / micro-disconnection construction (for other versions except US)
[Switch without contact gap symbol] Switch without contact gap (Semiconductor switching device)
