Dakota Micro

User Manual

RazerCam™ R Series Skid Steer Camera Bracket

Important - Read Prior to Operating Equipment

Compatible cameras, monitors, and cabling have been tested and are verified to work with the specifications provided below. There may or may not be other applications in which these parts and their connectors have not been verified by Dakota Micro. In those instances, it is the user’s responsibility to verify the equipment’s video capability, video format, and compatible wiring connectivity. Please follow all safety signs and precautions.

Bracket Specifications

Description	Part Number
This RazerCam™ kit includes one (1) camera bracket and hardware designed for use on R series skid steers.	DMRZ-RSBKT

Installation Instructions

Open the back tailgate of the skid steer and locate the camera connection ports. **
Place the camera in the bracket with RazerCam™ towards the top of the bracket. The mounting holes are located on the bottom of the bracket.
Find the best position for the camera for your liking.
Use the included self-tapping screws to secure the bracket in place.

**See your equipment’s user manual for exact location of camera connection ports.

A close-up view shows the RazerCam™ camera mounted onto the skid steer bracket, with the cable connection visible.

Consumer Limited Warranty

Dakota Micro, Inc. warrants that the Product will be free from defects in material and workmanship for periods as stated hereafter from the date of original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. THE EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS STATED IN THIS WARRANTY, DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations made by anyone which are contrary to or at variance with the terms stated in this LIMITED WARRANTY are void.

Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of five (5) years for AgCam® /EnduraCam® cameras; three (3) years for InnoPro® cameras; two (2) years for AgCam®/ EnduraCam® monitors, and Wireless components; Twelve (12) Months for all Overview® and RazerCam™ Cameras & Monitors, cables and all other accessories.

In addition to the five (5) years for AgCam® /EnduraCam® cameras Dakota Micro will warranty for the life of the camera against any variety of ingress within the camera housing. This includes moisture and dust particles that are found inside the camera resulting from a manufacturing defect and does not include ingress because of damage caused by no fault of Dakota Micro, Inc.

The Dakota Micro, Inc. limited warranty periods outlined above apply throughout the United States and Canada only. A one (1) year maximum limited warranty for all Products applies to all other geographic locations unless otherwise stated in writing by Dakota Micro, Inc.

This limited warranty does not apply to any issues connected with appearance that have no relation to the performance of the Product nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the process set forth in the Product Warranty/Repair Process, and provide proof of purchase to Dakota Micro, Inc.

Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time periods described herein.

The warranties described herein shall be the sole and exclusive warranties and remedies provided by Dakota Micro, Inc. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or in any way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than Dakota Micro, Inc.

Some states do not allow the limitation or exclusion of incidental or consequential damages, so said limitation may not apply to you.

Any action at law, suit in equity, or other judicial proceeding for the enforcement of any right provided for herein or otherwise, or with respect to any claim that a purchaser may have against Dakota Micro, Inc. shall be instituted only in the Courts of the State of North Dakota, either in the state district court located in Wahpeton, North Dakota or in Federal District Court located in Fargo, North Dakota. Without regard to conflicts of law principles, the laws of the state of North Dakota shall govern the interpretation and enforcement of the terms of this Limited Warranty and all aspects of the relationship between Dakota Micro, Inc., and the purchaser.

This warranty gives you specific legal rights and you may also have other rights, which may vary from state to state.

Dakota Micro, Inc.
8659 148½ Ave. SE.
Cayuga, ND 58013
www.dakotamicro.com
Management System Registered to ISO 9001

	Dakota Micro DMAC-TVA User Manual and Limited Warranty User manual and consumer limited warranty for the Dakota Micro DMAC-TVA adapter cable, connecting AgCam®, EnduraCam®, and RazerCam™ cameras to RCA female inputs. Includes cable specifications, connector details, installation instructions, and warranty terms.
	Dakota Micro DMAC-JD2COC User Manual: AgCam/EnduraCam/RazerCam to John Deere CommandView II Cab Adapter Cable User manual and limited warranty information for the Dakota Micro DMAC-JD2COC adapter cable, connecting AgCam, EnduraCam, and RazerCam cameras to John Deere CommandView II Cabs.
	Dakota Micro DMAC-ALI User Manual: Connecting AgCam Cameras to TE Connectivity User manual for the Dakota Micro DMAC-ALI adapter cable, detailing its specifications, cable connectors, installation instructions, and consumer limited warranty for AgCam, EnduraCam, and RazerCam cameras with TE Connectivity 28-pin female connectors.
	Dakota Micro DMAC-MRNG Monitor In-Line Noise Suppressor User Manual and Warranty User manual and limited warranty information for the Dakota Micro DMAC-MRNG In-Line Noise Suppressor, designed to reduce electrical noise and interference for Dakota Micro monitors.
	Dakota Micro 3rd Party Adaptor Monitor Guide A comprehensive guide from Dakota Micro detailing AgCam and OverView adaptor compatibility for a wide range of agricultural and industrial monitors, including models from AGCO, John Deere, Case IH, Fendt, and many others.
	Dakota Micro Monitor Input Guide: AgCam & OverView Adapter Compatibility A comprehensive guide from Dakota Micro, Inc. detailing monitor compatibility with AgCam and OverView camera systems. Covers various agricultural brands including AGCO, John Deere, CNH, Trimble, and more, listing monitor types, video capabilities, formats, and required adapter part numbers.
	Dakota Micro 3rd Party Adaptor Monitor Guide A comprehensive guide from Dakota Micro detailing 3rd party adaptor compatibility for various agricultural monitor systems, including AGCO, AgLeader, John Deere, and more, specifying AgCam and OverView adaptor part numbers.
	Dakota Micro Monitor Input Guide This guide from Dakota Micro, Inc. provides essential compatibility information for various agricultural monitors from leading manufacturers such as AGCO, John Deere, CNH, AgLeader, and many others. It details video capabilities, formats, input counts, and lists specific AgCam and OverView adapter part numbers required for integration. The document helps users identify the correct camera system components for their specific tractor or implement monitors.