Dakota Micro 3rd Party Adaptor Monitor Guide
AGCO (Massey, Challenger & Gleaner) Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| AGCO Global Cabs pre-wired using NT01 or Tyton Monitor for video display | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: AC-FDT01 (1 per camera) |
None |
| AGCO Global Cabs pre-wired with AgCam monitor for video display | Analog & AHD Video Capable | NTSC/PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: BCOMB-4C |
None |
| AGCO Combines pre-wired with video ready C2100 Console 2012 or newer Challenger, Massey & Gleaner Combines | Analog Video Capable Not able to display AHD |
PAL | 1-2 | A small monitor screen displaying four quadrants is shown. Hookup Info: 2 Adaptor Cables required: PN: BUSB1 - Connects to a mating connector inside of the headrest. PN: BCOMB4C - Connects to a mating connector outside and under the cab, above the feeder housing. |
AgCam adaptor with a multi-pin connector. PN: BUSB1 AgCam adaptor with a multi-pin connector. PN: BCOMB-4C |
None |
AGCO (Massey, Challenger & Gleaner) Monitors (Continued)
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| C2100 Console C3000 Console (All Others) | Analog Video Capable Not able to display AHD |
PAL | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: BUSB1-TC |
Not compatible due to video format |
| C2000 Console 2 2009-2015 Challenger 2009-2015 Massey 2009-2015 Gleaner (ALL "U" Serial Numbers) | Analog Video Capable Not able to display AHD |
PAL | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: AC-A2C |
Not compatible due to video format |
| C1000 Model Year 2010-2015 MF 8600 Series AGCO DT-B Series Challenger C-series | Analog Video Capable Not able to display AHD |
PAL | 1 | A small monitor is shown. |
AgCam adaptor with a multi-pin connector. PN: AC-A1C |
Not compatible due to video format |
| GTA/Console 1 Massey 6400/7400/8400 AGCO DTA/RTA Challenger B-Series 500/600 | Video Enabled Models ONLY (check back of monitor for video input) | PAL | 1 | A small monitor is shown. |
Adaptor cable no longer available - OBSOLETE |
Not compatible due to video format |
AgLeader Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| InCommand 800 & 1200 | Analog Video Capable Not able to display AHD |
PAL/NTSC | 1-4 | A small monitor screen is shown. *Monitor does not have on board mirroring capability. Use Elite AgCam for this function. |
AgLeader 4 camera cable PN: 4004494-12 AgLeader 2 Camera cable PN: 4004493-12 |
AgLeader PN AND Dakota Micro PN: DMAC-OVC (this adaptor cable is only for a single camera, if you want to hook up 4 cameras, you will need 4 of these) |
| Versa Integra | Analog Video Capable Not able to display AHD |
PAL/NTSC | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-ALI |
OverView adaptor with a multi-pin connector. PN: DMOV-ALI |
| InSight Edge Compass | NOT Video Capable | N/A | NONE | N/A |
Not Available | Not Available |
ASA (Audiovox) Monitors
| Device Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Voyager and ToughCam Monitor | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-ADVX-M |
OverView adaptor with a multi-pin connector. PN: DMOV-ADVX-M |
| Voyager and ToughCam Camera to AgCam or EnduraCam monitor | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-ADXC |
Not Available |
A&I (CabCam) Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| CabCam Camera | Analog Video Capable Not able to display AHD |
NTSC | 1-4 | A small camera unit is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-OVC |
None required, same connectors |
| CabCam Monitor | Analog Video Capable Not able to display AHD |
NTSC | 1-4 | A small monitor is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-OVM |
None required, same connectors |
CAT WAVS (Orlaco) Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Pre-wired CAT equipment with WAVS (Orlaco) Monitors | Analog Video Capable Not able to display AHD |
NTSC | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-CAT1 |
OverView adaptor with a multi-pin connector. PN: DMOV-CAT1 |
CNH (Case & New Holland) Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| New Holland CR Combines | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-3 | A small monitor screen is shown. Hookup locations described in Combine Manual. |
AgCam adaptor with a multi-pin connector. PN: DMAC-JD6R |
OverView adaptor with a multi-pin connector. PN: DMOV-JD6R |
| CNH 2014 Prewired Combines | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-3 | A small monitor screen is shown. Connection Info: Camera 1 & 2: located beneath the front, ladder side shield, below the grain tank, just inside the frame. Camera 3: located under the mounting plate of the GPS receiver inside the hopper. |
AgCam adaptor with a multi-pin connector. PN: DMAC-CNH1F |
OverView adaptor with a multi-pin connector. PN: DMOV-CNH1F |
| AFS 200 AFS Pro 700 AFS Pro 300 NH IntelliView II & III (NH IntelliView Plus II NOT video Capable) | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1 | A small monitor screen is shown. Single camera adaptor plugs directly into BNC plug on rear of monitor. |
AgCam adaptor with a multi-pin connector. PN: DMAC-CNH1 |
OverView adaptor with a multi-pin connector. PN: DMOV-CNH1 |
CNH (Case & New Holland) Monitors (Continued)
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| AFS 200 AFS Pro 700 AFS Pro 300 NH IntelliView II & III (AFS Pro 600 NOT video capable) | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-3 | A small monitor screen is shown. Connection Info: Camera 1: Plugs directly into BNC plug on rear of monitor. Camera 2 & 3: Hardwire directly into bulkhead connection. |
AgCam adaptor with a multi-pin connector. PN: DMAC-CNH3 |
OverView adaptor with a multi-pin connector. PN: DMOV-CNH3 |
Dakota Micro Inc. Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| AgCam 7, 9" or 9" Quad Monitor | Analog & AHD Video Capable | NTSC/PAL | 1-4 | A small monitor screen displaying four views is shown. |
None required, same connectors | OverView adaptor with a multi-pin connector. PN: DMAC-OVC |
| OverView 7" or 7" Quad monitor (Same connectors as CabCam) | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-OVM |
None required, same connectors |
DICKEY-john Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| IntelliAg 10" VT | Analog Video Capable Not able to display AHD |
PAL | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: AC-A2C |
Not compatible due to video format |
Fendt Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| AGCO Global Cabs with NT01 or Tyton Monitor Or VarioTerminal 10.4" Tier 4i 700, 800 & 900 Series (10.4" standard, 7" below is optional on this series tractor) | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: AC-FDT01 |
Not compatible due to video format |
| VarioTerminal 7" VarioTerminal 5" | NOT Video Capable | None | N/A | N/A |
Not Video Capable | Not Video Capable |
Kuhn/Spudnik Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| CCI100 | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1 | A small monitor screen is shown. |
Adaptor cable no longer available - OBSOLETE |
Not Available |
John Deere Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| John Deere S-Series Combines, Cotton Pickers & Sprayers | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-2 | A small monitor screen is shown. Hookup information available in JD equipment users manual. |
AgCam adaptor with a multi-pin connector. PN: AC-FDT01 |
Not Available |
| Generation 4 Command Center - 4600 w/ Touch Screen | Analog Video Capable Not able to display AHD |
NTSC/PAL | 4 | A small monitor screen is shown. Hookups located outside the cab; refer to JD equipment users manual for locations. |
AgCam adaptor with a multi-pin connector. PN: DMAC-JDCOC |
OverView adaptor with a multi-pin connector. PN: DMOV-JDCOC |
John Deere Monitors (Continued)
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| GreenStar 3 2630 | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-3 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-JD3C |
OverView adaptor with a multi-pin connector. PN: DMOV-JD3C |
| John Deere Command View II Cab Equipped with GreenStar 3 2630 Monitors | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-3 | A small monitor screen is shown. Hookups located outside the cab; refer to JD equipment users manual for locations. |
AgCam adaptor with a multi-pin connector. PN: DMAC-JD2COC |
OverView adaptor with a multi-pin connector. PN: DMOV-JD2COC |
| GreenStar 3 Command Center w/ Touch Screen (Touch screen ONLY!) | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-JDCOC |
OverView adaptor with a multi-pin connector. PN: DMOV-JDCOC |
| Pre-wired John Deere R Series Tractors & S Series Combines Premium Cabs ONLY | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1 | A small monitor screen is shown. Hookup located inside the cab, behind seat. |
AgCam adaptor with a multi-pin connector. PN: DMAC-JD6R |
OverView adaptor with a multi-pin connector. PN: DMOV-JD6R |
| GreenStar 2 1800 GreenStar 2 2600 | NOT Video Capable | N/A | N/A | N/A |
Not Video Capable | Not Video Capable |
Lexion/Class Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Lexion Combine, Claas 780-670 Choppers, Jaguar 930-980 and 880-840 | Analog Video Capable Not able to display AHD |
PAL | 1 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-CLS |
Not compatible due to video format |
| With pre installed ProfiCam Monitor | NOT Video Capable | N/A | NONE | N/A |
Not Video Capable | Not Video Capable |
| Cebis | Video Capable | NTSC/PAL (depends upon model) | Varies | N/A |
N/A | N/A |
Misc. Devices
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Television/VCR | Analog or AHD depends upon model | NTSC/PAL (depends upon model) | Varies | A small television/VCR unit is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-TVA |
Not Available |
| Computer | Video Capable Analog or AHD depends upon model |
NTSC/PAL | Varies | A laptop computer is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-2USB |
Not Available |
| DVR (short distances) | Video Capable Analog or AHD depends upon model |
NTSC/PAL | Varies | A DVR unit is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-CNH1 |
Not Available |
Misc. Devices (Continued)
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Surveillance System (Security system camera into DM system) | Analog or AHD depends upon model | NTSC/PAL | Varies | N/A |
AgCam adaptor with a multi-pin connector. PN: DMAC-SCA |
Not Available |
| Surveillance System (DM Camera into existing security system) | Video Capable Analog or AHD depends upon model |
NTSC/PAL | Varies | N/A |
AgCam adaptor with a multi-pin connector. PN: DMAC-SSA |
Not Available |
Motec Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Motec Camera (allows for an AgCam monitor to be used with a Motec camera) | Analog Video Capable Not able to display AHD |
PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-MTC |
Not Available |
| Motec Monitor (allows for an AgCam camera to be input into a Motec Monitor) | Analog Video Capable Not able to display AHD |
PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-MTM |
Not Available |
Mueller Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Basic Terminal Comfort Terminal Track Guide II GuideME w/ installed GSM modem | Analog Video Capable Not able to display AHD |
PAL | 2 | A small monitor screen is shown. |
Adaptor cable no longer available - OBSOLETE |
Not Available |
Outback/AgJunction (Formerly Hemisphere GPS) Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Outback Max | Analog Video Capable Not able to display AHD |
NTSC/PAL | 4 | A small monitor screen is shown. |
Cable Sold by Hemisphere, Adaptor Cable PN: 051-0285-000 |
Outback Adaptor cable + OverView conversion cable: PN: DMAC-OVC |
| Outback STS Outback S3 Outback S-LITE | NOT Video Capable | N/A | NONE | A small monitor screen is shown. |
Not Video Capable | Not Video Capable |
Raven Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Raven Viper 4 | Analog Video Capable Not able to display AHD |
NTSC/PAL | 1-4 | A small monitor screen is shown. |
Cable sold by Raven Adaptor Cable PN: 11150172077 |
Raven Adaptor cable + OverView conversion cable: PN: DMAC-OVC |
TeeJet Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Matrix 570G Matrix 840G | Analog Video Capable Not able to display AHD |
PAL/NTSC | Unk | A small monitor screen is shown. |
None required, same connectors | OverView adaptor with a multi-pin connector. PN: DMAC-OVC |
TOPCON Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| X20 | Analog Video Capable Not able to display AHD |
PAL | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-USB1-TC |
Not compatible due to video format |
| X30 (requires unlock Key) | Analog Video Capable Not able to display AHD |
PAL/NTSC | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-USB1-TC |
Not compatible due to video format |
Trimble Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| AgGPS FmX/FM1000 | Analog Video Capable Not able to display AHD |
PAL/NTSC | 1-4 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-TRMBL-FMX |
OverView adaptor with a multi-pin connector. PN: DMOV-TRMBL-FMX |
| CFX-750 | Analog Video Capable Not able to display AHD |
PAL/NTSC | 1-2 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: DMAC-TRMBL-FMX |
OverView adaptor with a multi-pin connector. PN: DMOV-TRMBL-FMX |
| TMX-2050 | Analog Video Capable Not able to display AHD |
NTSC | 1-2 | A small monitor screen is shown. EXP-100 Kit Available ONLY through Trimble dealers PN: 101990-01 PLUS. |
AgCam adaptor with a multi-pin connector. PN: DMAC-TRMBL-FMX |
EXP-100 Kit PLUS OverView PN: DMAC-OVC |
| AgGPS Field Manager EZ Guide | NOT Video Capable | N/A | NONE | N/A |
Not Video Capable | Not Video Capable |
Versatile Monitors
| Monitor Type | Video Capability | Video Format | # of Video Inputs | Monitor Photo or Hookup info | AgCam Adaptor | OverView Adaptor |
|---|---|---|---|---|---|---|
| Versatile Display Monitor | Analog Video Capable Not able to display AHD |
PAL | 1 | A small monitor screen is shown. |
AgCam adaptor with a multi-pin connector. PN: VER-WAC11 |
Not compatible due to video format |
