Instructions Before Use

1. Bus Servo Control.exe is PC software for the Bus servo controller.

[Icon representing Bus Servo Control software]

2. Bus Servo Terminal is the parameter setting software of LX-224HV servo.

[Icon representing Bus Servo Terminal software]

3. Before using the servo controller, please set the parameters and ID of the servo with the servo debug board (BusLinker). In general, you only need to set the ID.

[Image description: A circuit board labeled 'BusLinker-V' with connections for USB port, Serial port, and Servo interface. The USB port is labeled 'USB port'. The serial port has pins labeled '5V', 'TX', 'RX', 'GND'. The servo interface has pins labeled '+', '-', 'S' (signal), and a power input with '+' and '-' terminals labeled 'Vin=6-8.4V'.]

4. The servo controller can be used to control the servos after the servo ID number being set.

	Hiwonder LX-16A Serial Bus Servo User Manual Explore the Hiwonder LX-16A Serial Bus Servo with this comprehensive user manual. Learn about its advanced serial bus communication, high-precision features, and practical applications in robotics. Includes detailed specifications, project examples with Arduino UNO, and troubleshooting tips for building sophisticated robotic systems.
	xArm 1S Assembly Instructions and Component Guide Detailed assembly instructions and component list for the xArm 1S robotic arm, including step-by-step guidance and a comprehensive screw list.
	Hiwonder TonyPi Pro Quick User Experience Guide Learn how to install the WonderPi app, connect your TonyPi Pro robot, and operate it using various AI vision games with this quick user experience guide from Hiwonder.

Related Documents