Char-Broil 6339 Digital Electric Vertical Smoker Stand Assembly Instructions
Model: 6339
Compatible with: DIGITAL ELECTRIC VERTICAL SMOKER® 725
Tools Needed for Assembly
- 5/16" Nutdriver (not provided)
- Philips Screwdriver (not provided)
Parts and Hardware
Fasteners:
- 10-24 KEPS nut: QTY.: 26
- #10 Washer: QTY.: 26
Components:
- Side Panels: 8x (per side)
- Front and Back Panel: 3x
Diagram Description: The assembly diagram shows the main components of the smoker stand: two side panels, a front/back panel, and a base. The diagram also indicates the quantities of fasteners required for assembly. A close-up view shows a screw and washer being used to connect parts.
Assembly Steps
Step 1: Assemble the Stand Frame
Attach the two side panels to the base using the provided screws and washers. The diagram indicates 8 screws are used per side panel. Ensure all connections are secure.
Step 2: Attach Front and Back Panels
Secure the front and back panels to the assembled side panels and base. The diagram indicates 3 screws are used for the front and back panels. Ensure the panels are oriented correctly.
Step 3: Mount the Smoker Unit
NOTE: Remove and reuse 4 screws from the base of the Digital Electric Smoker unit. Place the smoker unit onto the assembled stand. Align the mounting holes and secure the smoker to the stand using the 4 screws previously removed from the smoker's base. The diagram shows an exclamation mark ⚠️ indicating this important note.
The diagram shows the smoker unit being placed on the stand, with an indication of "4x" screws used for securing the smoker to the stand.
