Amazfit T-Rex Pro A2013 Product Manual

01 Package Contents

The package includes:

• Smartwatch with band 1
• Charging base 1
• Instruction Manual 1

02 About the Watch

The watch features the following components:

• Upper button
• Lower button
• Power/Select button
• Touch screen
• Back button
• Heart rate sensor
• Charging plates

Note: Press and hold the power button to turn on the watch. If the watch cannot be turned on, please charge it and then try again.

03 Pairing the Watch

To pair your watch:

1. Scan the QR code provided in the Instruction Manual with your mobile phone to download the Zepp App. You can also download the latest version from the Google Play Store or Apple App Store.
2. Open the app, register an account, and log in.
3. Follow the steps in the app to pair your watch correctly. Once pairing is complete, the watch will display the correct time.
4. You can set other watch functions as needed.

Note: For a better user experience, please use the most recent version of the app. The operating system must be Android 5.0 or iOS 10.0, or above. Do not pair the watch directly using your mobile phone's Bluetooth; follow the steps in the app.

04 Charging the Watch

To charge the watch:

1. Connect the watch's charging cable to a power adapter or a computer's USB port.
2. Place the watch into the charging base. Ensure the direction and position are correct, and the metal contacts on the back of the watch fit closely with the charging base.
3. The watch screen will display the charging progress when charging starts.

Note: Please use the charging base that comes with the watch. Make sure the charging base is dry before charging. Please use a 1A or above power adapter.

05 Disassembly and Assembly of the Watch Strap

To install or remove the strap, hold the screw on one side with a screwdriver and rotate the nut on the other side. This is illustrated in the provided diagrams.

Note: Once the strap is assembled, pull it properly to ensure it is installed successfully.

06 Wearing the Watch

For optimal comfort and sensor function:

• Wear the watch strap not too tightly or too loosely, leaving enough space for the skin to breathe.
• When measuring blood oxygen saturation, wear the watch correctly. Avoid wearing it on the wrist joint, keep your arm flat, maintain a comfortable (appropriately tight) fitting between the watch and the skin of your wrist, and keep your arm still throughout the measurement process. External factors like arm sag, arm sway, arm hair, or tattoos may affect measurement accuracy or cause failure.
• It is recommended to tighten the watch strap during exercise and loosen it afterwards.

07 Basic Parameters

View product certification information on the watch's Settings > System > Regulation page.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Anhui Huami Information Technology Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

08 Regulatory Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AC8UA2013

Any changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

IC: 21806-A2013

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

09 Disposal and Recycling Information

Products bearing the WEEE symbol are waste electrical and electronic equipment. They should not be mixed with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Contact local authorities for more information on collection points.

10 Certifications and Safety Approvals

Anhui Huami Information Technology Co., Ltd. declares that the radio device type A2013 complies with Directive 2014/53/EU and Radio Equipment Regulations 2017 (S.I. 2017/1206).

The full text of the EU declaration of conformity is available at: https://support.amazfit.com/en

For more regulatory information and product certification/compliance logos, please refer to the Regulatory section on your Amazfit T-Rex Pro.

11 Battery Safety

• The device has a built-in battery that cannot be removed or replaced. Do not disassemble or modify the battery yourself.
• Disposing of a battery into fire or a hot oven, or mechanically crushing or cutting it, can result in an explosion.
• Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.

12 Safety Notice

• Keep the product and accessories away from children and pets to prevent injury.
• Do not expose the product to excessively high or low temperatures, as this may cause fire or explosion.
• Do not place the product near heat sources or open flames, such as ovens and electric heaters.
• Some individuals may experience allergic skin reactions to materials. If symptoms like redness, swelling, or inflammation occur after prolonged contact, discontinue use and consult a doctor.
• Do not use unauthorized or incompatible power adapters, chargers, or data cables, as they may damage the watch, cause fire, explosion, or other hazards.
• Radio waves generated by the product may affect the operation of implanted medical devices or personal medical devices, such as pacemakers and hearing aids. Consult the manufacturer of such medical devices for relevant usage restrictions.
• Dispose of the device and its accessories according to local laws and regulations, and support recycling efforts.

13 Repair and Maintenance

• Avoid using detergents like soap, hand sanitizer, bath foam, or lotion for cleaning to prevent skin irritation, device corrosion, or degradation of water resistance.
• After wearing the device during bathing, swimming, or sweating, clean and dry the device promptly.
• The leather strap is not waterproof. Avoid getting it wet to prolong its service life.
• When using light-colored watch straps, avoid contact with dark clothing to prevent staining.
• Do not expose the device to direct sunlight for long periods. Extreme temperatures can cause device failure.
• Handle with care during transportation. Keep the device dry and away from humidity.

14 Troubleshooting

For troubleshooting, please check the FAQ on the website: https://support.amazfit.com/en

15 Warranty and Return Policy

The Amazfit Limited Warranty covers manufacturing defects for 12 months from the original purchase date, or as required by applicable consumer laws. This warranty is in addition to rights provided by consumer laws.

Official website: en.amazfit.com

Support: support.amazfit.com/en