Product Overview
The EK-Classic GPU Water Block Trio RTX 2080 Ti D-RGB is a high-performance water cooling solution engineered by EKWB. It is designed to replace the stock cooler on the NVIDIA GeForce RTX 2080 Ti Trio graphics card, offering superior thermal dissipation and customizable D-RGB lighting.
Installation Guide
This manual guides users through the entire installation process, starting with the preparation of the graphics card, including removing the original backplate and stock cooler, and cleaning the PCB. It details the application of thermal compound and thermal pads, ensuring proper contact for efficient heat transfer.
The guide further explains the process of attaching the water block to the graphics card, securing it with the provided screws and washers. It also covers the installation of fittings and tubing, connecting the D-RGB LED strip for customizable lighting effects, and finally, inserting the assembled graphics card into the PC case.
Important Considerations
- This product is intended for installation by expert users. Consult a qualified technician if you are unsure about any step.
- Improper installation may result in damage to your graphics card or water block. EKWB assumes no liability for damages caused by incorrect installation.
- Always refer to the latest version of the manual available at www.ekwb.com for updates.
- For best results, EKWB recommends using their proprietary coolants, such as EK-CryoFuel.
Support and Service
For any assistance or further information, please contact EKWB support at http://support.ekwb.com/.
Connect with EKWB
- Facebook: EKWaterBlocks
- Twitter: @EKWaterBlocks
- Instagram: ekwaterblocks
- YouTube: EKWBofficial
- Pinterest: ekwaterblocks
