Sangean WR-11BT+ Bluetooth Radio

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with clean dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the power cords ends, wall outlet and where the power cord comes out of the radio.
11. Only use attachments / accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. To Reduce the Risk of Fire or Electric Shock, Do not Expose This Appliance To Rain or Moisture.
16. The Shock Hazard Marking and Associated Graphical Symbol is provided on the back of unit.
17. Apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids should be placed on the radio.
18. Excessive sound pressure on your ears with or without headphones could impair your hearing ability.

Controls and Connections

• 1 Dial scale: Tuning scale
• 2 Dial indicator: Tuning indicator
• 3 Tuning LED indicator: Indicates optimal tuning
• 4 Tuning Control knob: Selects desired station
• 5 Power and Band selecting knob: Turns radio on/off and selects band (FM/AM/Bluetooth/Aux)
• 6 Volume Control knob: Adjusts listening volume
• 7 Speaker: Audio output
• 8 F-type external antenna terminal: For connecting external FM antenna
• 9 USB charging socket: For charging devices (5V, 1A max)
• 10 AC power cord socket: Connects to AC power adapter
• 11 12V DC input socket: For 12V DC power supply
• 12 Headphone socket: 3.5mm stereo jack for headphones
• 13 REC out socket: Mono audio output for recording
• 14 Aux in socket: 3.5mm stereo jack for external audio input
• 15 External / Internal antenna switch: Selects antenna source
• 16 NFC detection area: For NFC pairing

Powering Your Radio

AC Operation

Before plugging the AC cord into the radio, ensure the AC voltage is correct. Insert the plug of the supplied power cord into the AC power socket on the back of the radio.

DC Operation

For outdoor use, the radio can be powered by a 12V DC input socket from a DC power supply (not included), such as from vehicles or boats. An AC power adapter with 1 Ampere and center positive polarity can also power the radio.

Operating Your Radio (FM / AM)

1. The radio has a built-in AM/FM antenna. For better AM reception, rotate the radio. For better FM reception, insert the supplied FM wire antenna into the F-type antenna terminal and adjust for best reception. A 75-ohm coaxial cable to an outdoor antenna can also be connected. Ensure the external/internal antenna switch is set to 'external' when using the supplied wire antenna or an outdoor antenna. An antenna terminal adapter (EU Version Only) may be needed for outdoor antennas in some European countries.
2. Turn on the radio by rotating the Power knob to the FM/AM position.
3. Rotate the Tuning Control knob to select the desired station. The Tuning LED indicator will be brightest when optimal tuning is achieved.
4. Adjust the Volume Control knob for comfortable listening.
5. To switch off the radio, turn the Power knob to the OFF position.

Listening to Bluetooth Music

You need to pair your Bluetooth device with your radio before you can auto-link to play or stream music. Pairing creates a 'bond' allowing devices to recognize each other.

Pairing Your Bluetooth Device for the First Time

1. Rotate the Band selecting knob to select the Bluetooth function. The Bluetooth icon on the panel will flash blue.
2. Activate Bluetooth on your device according to its user manual to link to the WR-11BT+. Some older Bluetooth versions (prior to BT2.1) may require the pass code "0000".
3. Once connected, a beep will sound, and the Bluetooth icon will remain illuminated blue. You can now play music from your Bluetooth-enabled device.

Notes on Bluetooth Connectivity:

• If multiple devices search for the WR-11BT+, it may appear on all. However, only one device can connect at a time.
• If your source device goes out of range, the connection will be temporarily lost. The radio will attempt to reconnect automatically if the device returns within 3 minutes. Otherwise, manual reconnection is required. During disconnection, no other Bluetooth device can pair.
• If 'SANGEAN WR-11BT+' appears in your device list but fails to connect, remove it from the list and re-pair.
• The effective operation range is approximately 10 meters (30 feet). Obstacles can reduce this range.
• Bluetooth/NFC performance may vary by device. Check your device's Bluetooth capabilities. Not all features may be supported on all paired devices.
• On some mobile phones, calls, texts, or other non-audio activities may mute or temporarily disconnect Bluetooth audio streaming. This is a device function, not a radio fault.

Playing a Previously-Paired Bluetooth Source Device

The WR-11BT+ can memorize up to 2 paired devices. If more are paired, the oldest entry is overwritten. The radio will attempt to reconnect to the last connected device. If unavailable, it tries the second-to-last.

Disconnecting Your Bluetooth Device

Rotate the Band selecting knob to any other band or the OFF position, or disconnect the Bluetooth-enabled device. The Bluetooth icon LED will flash, indicating deactivation.

Pairing and Playing Your Device via NFC

The WR-11BT+ features NFC for easy pairing and music playback with NFC-enabled devices. For non-NFC devices, use standard Bluetooth pairing.

1. Rotate the Band selecting knob to the Bluetooth setting. The Bluetooth icon will flash blue.
2. Turn on the NFC feature on your device.
3. Touch your device's NFC area against the radio's NFC detection area. The WR-11BT+ will automatically pair. For first-time pairing, your NFC device may ask for permission. A beep and a solid blue Bluetooth icon indicate a successful connection.
4. Use your device's controls to play, pause, and navigate tracks.

Notes on NFC Pairing:

• To link another Bluetooth device via NFC, disconnect the current one first.
• NFC detection area locations vary by device. Consult your device's user guide.
• Metallic phone cases may reduce NFC sensitivity; remove them before activating NFC.

Disconnecting Your NFC-Enabled Device

Touch your device's NFC area to the radio's NFC detection area again. The Bluetooth icon LED will flash blue, indicating deactivation.

Headphone Use

Use headphones with a 3.5mm connector. Insert the connector into the headphone socket on the back of the radio. The loudspeaker is automatically disconnected when headphones are plugged in.

AUX IN Socket

A 3.5mm Auxiliary Input socket on the back allows audio input from external devices like iPods, MP3 players, or CD players.

1. Rotate the Band selecting knob to select "AUX".
2. Connect an external audio source to the Auxiliary Input socket.
3. Adjust the volume on your external device for an adequate signal level, then adjust the radio's Volume Control knob for comfortable listening.

REC Out Socket

This output can be used to connect the radio as a separate tuner to a stereo receiver or pre-amplifier. It can also be used to make mono recordings from audio programs.

Charging with USB Socket

The USB socket is intended for charging iPhones, smartphones, or similar devices. Charge times may vary and can be longer than with manufacturer-supplied chargers. For interference reasons, the WR-11BT+ can only charge when the radio is off.

Important USB Notes:

• The USB jack supports devices with a maximum input of 1A/5V. It does not support external hard drives or some mobile phones/electronic devices.
• The charger may not supply power to all USB devices.
• Do not connect a power source to the USB port; this risks fire. The port is for low-voltage devices only.
• Do not insert foreign objects (nails, wires, etc.) into the USB port, as this can cause short circuits, smoke, or fire.
• Do not connect this USB socket to your PC's USB port, as it may cause damage to both units.
• Never use the USB socket in rainy or moist conditions to prevent moisture from entering the radio.

Specifications

Accessories

• FM F-terminal antenna wire
• AC Power Cord
• F to PAL terminal adapter (European version only)

Dimensions and Weight

Dimensions: 240 (W) x 119 (H) x 168 (D) mm (9.44” (W) x 4.68” (H) x 6.61” (D))

Weight: 2.375kg (5.23lbs.)

Product Identification

The barcode label on the product includes:

• Serial number
• Production month
• Production year
• Product code

Disposal Information

The company reserves the right to amend specifications without notice. If you need to dispose of this product in the future, please note that waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive).